Limpets as prey: Lipophrys pholis choice for size

Patellid limpets are key species on rocky shores, structuring intertidal assemblages through their grazing. Their role as prey for fish is, however, often overlooked in studies of intertidal ecosystem functioning. The shanny Lipophrys pholis is a common predator of limpets on rocky shores in Northern Europe and, in this study, we examined the characteristics of its predation on limpets based on prey size. The limpet size range that adult L. pholis (10–12.5 cm) can eat was examined in the laboratory using Patella depressa in 0.2 cm classes, varying between 0.5 cm and 3.0 cm in maximum shell length. There was a limpet size refuge above 1.8 cm, while all smaller sizes were readily consumed by the shanny. The predator attacking behaviour was also examined and found to vary with prey size. Limpets up to 0.8 cm were crushed by the jaw‐constricting force and eaten whole, whereas larger prey were prised from the substratum and the body subsequently separated from the shell. To examine whether there was a L. pholis preference for P. depressa size, a two‐stage laboratory experiment was done using two size classes defined as small (0.7–0.8 cm maximum shell length) and large (1.5–1.6 cm maximum shell length). In the first stage, the predator was given each limpet size class separately. In the second stage, the fish was given a choice between the two classes. Lipophrys pholis was shown to have a preference for the large size class (1.5–1.6 cm). The average number of limpets consumed by the shanny was examined for the duration of one high‐tide typical of the central region of Portugal (≈ 4 h). On average, approximately five limpets (up to an eight limpet maximum) were consumed. The present study shows that L. pholis has a feeding preference based on limpet size, which suggests that the limpet population structure and intra‐ and inter‐specific interactions may be influenced by the shanny predation.     

Diel and seasonal variability in the fish community structure of a mud‐bottom estuarine habitat in the Gulf of Mexico

We hypothesized that temporal variation in fish species composition and community structure in a low complexity habitat in the Pueblo Viejo Lagoon, Mexico, is influenced by diel light/dark cycles and tidal stage, and by seasonal changes in salinity and temperature. We collected a total of 17,661 individuals during 2‐h interval sampling over six bi‐monthly 24‐h sampling cycles representing 53 species, of which 11 (～20%) were previously unknown in the system. Diel variation indicated that significantly higher numbers of individuals and species were caught at night, whereas diversity and evenness were higher during the day. Species richness was significantly higher in July and January, whereas diversity and evenness peaked around May; both were correlated with temperature. Diel variation in species composition was influenced primarily by the light/dark cycle. Cluster analyses of each diel cycle separated fish assemblages from midday samples from those of nocturnal samples, separated by an extended wide transition period as fish moved at dawn and during the late afternoon/dusk. Significant shifts (as determined by MANOVA) in assemblage structure occurred between months. Canonical correspondence analysis showed that temperature and day/night effects were the most important environmental variables structuring the fish community. This constrained ordination also defined species with specific habitat preferences as follows: (i) diurnal, warm temperature species (mainly planktivores) (Brevoortia gunteri, Cetengraulis edentulus, Diapterus auratus, and Membras martinica); (ii) nocturnal, warm temperature species (mainly predators) (Citharichthys spilopterus, Cathorops melanopus, and Bairdiella spp.); and (iii) low temperature, diurnal species (Brevoortia patronus and Mugil curema) or those with twilight and nocturnal distributions (Anchoa mitchilli, the most numerically abundant species). Our results indicate that diel and seasonal changes in fish community structure were mainly related to day/night cycles and temperature regimes.     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

A predictive numerical model for potential mapping of the gas hydrate stability zone in the Gulf of Cadiz

This paper presents a computational model for mapping the regional 3D distribution in which seafloor gas hydrates would be stable, that is carried out in a Geographical Information System (GIS) environment. The construction of the model is comprised of three primary steps, namely: (1) the construction of surfaces for the various variables based on available 3D data (seafloor temperature, geothermal gradient and depth-pressure); (2) the calculation of the gas function equilibrium functions for the various hydrocarbon compositions reported from hydrate and sediment samples; and (3) the calculation of the thickness of the hydrate stability zone. The solution is based on a transcendental function, which is solved iteratively in a GIS environment.The model has been applied in the northernmost continental slope of the Gulf of Cadiz, an area where an abundant supply for hydrate formation, such as extensive hydrocarbon seeps, diapirs and fault structures, is combined with deep undercurrents and a complex seafloor morphology. In the Gulf of Cadiz, the model depicts the distribution of the base of the gas hydrate stability zone for both biogenic and thermogenic gas compositions, and explains the geometry and distribution of geological structures derived from gas venting in the Tasyo Field (Gulf of Cadiz) and the generation of BSR levels on the upper continental slope.     

Distribution and spatial variation of hydrothermal faunal assemblages at Lucky Strike (Mid-Atlantic Ridge) revealed by high-resolution video image analysis

Whilst the fauna inhabiting hydrothermal vent structures in the Atlantic Ocean is reasonably well known, less is understood about the spatial distributions of the fauna in relation to abiotic and biotic factors. In this study, a major active hydrothermal edifice (Eiffel Tower, at 1690 m depth) on the Lucky Strike vent field (Mid-Atlantic Ridge (MAR)) was investigated. Video transects were carried out by ROV Victor 6000 and complete image coverage was acquired. Four distinct assemblages, ranging from dense larger-sized Bathymodiolus mussel beds to smaller-sized mussel clumps and alvinocaridid shrimps, and two types of substrata were defined based on high definition photographs and video imagery. To evaluate spatial variation, faunal distribution was mapped in three dimensions. A high degree of patchiness characterizes this 11 m high sulfide structure. The differences observed in assemblage and substratum distribution were related to habitat characteristics (fluid exits, depth and structure orientation). Gradients in community structure were observed, which coincided with an increasing distance from the fluid exits. A biological zonation model for the Eiffel Tower edifice was created in which faunal composition and distribution can be visually explained by the presence/absence of fluid exits.     

Adsorption of cobalt by using inorganic components of sediment samples from water bodies

The adsorption of cobalt ions was evaluated using sediment samples from water bodies to investigate the adsorption properties of sediment and the behavior of these natural materials in the presence of nuclear and industrial waste.The two sediments(S1 and S2)were treated to eliminate humic and fulvic acids and then they were characterized by several techniques.The minerals found in both the sediments(X-ray diffraction)were quartz and albite;plus,goethite and muscovite in S1,and kaolinite and montmorillonite in S2.Point of zero charge(PZC)of S1 and S2 was 6.00 and 5.22,respectively.The specific area of S1(63.3 m²/g)is higher than S2(1.5 m²/g).Adsorption kinetics data for S1 and S2 were best fitted to the pseudo second-order model.The removal efficiency of S1 for cobalt was 96%with an adsorption capacity(qe)of 0.93 mg/g,and for S2 was 45%with a qeof 0.40 mg/g.The experimental data of the adsorption isotherms were adjusted to Langmuir and Freundlich models for S1 and S2,respectively.The thermodynamic parameters(enthalpy,entropy,and Gibb’s free energy)indicated that the adsorption processes were endothermic,spontaneous,and chemisorption mechanism.The results show that the adsorption capacities of the sediments depend on their composition.These water sediments have important adsorption properties for cobalt,and they can be used in the treatment of nuclear and industrial aqueous wastes.     

Holocene and Eemian climatic optima in the Korean Peninsula based on textural and carbon isotopic records from the stalagmite of the Daeya Cave,South Korea

Textural and stable isotopic records from the absolute-dated stalagmite of the Daeya Cave (DY-1) provide new insights into the climatic evolution of the Korean Peninsula during the Holocene and Eemian climatic optima. The stalagmite yielded ages of 8572 ± 227 to 5907 ± 158 and 1,23,456 ± 535 to 1,19,837 ± 1089 years, which coincide with the Holocene and Eemian climatic optima, respectively. The stalagmite’s δ¹³C record closely resembles previously reported Chinese speleothem δ¹⁸O data. Thus it can be suggested that textural and geochemical results of the DY-1 reflect East Asian monsoon intensity, which is forced by summer insolation patterns in the northern hemisphere. Lighter carbon isotopic compositions, well-developed fibrous calcite crystals, and their relatively faster growth rate in the stalagmite sample are interpreted to reflect the warmest and wettest climate conditions of the Holocene and Eemian interglacials. Both climatic optima took place when insolation was decreasing from its maximum level, temperature in Greenland was highest, and sea level approached its maximum level. These climatic optima also coincide with decreasing Antarctic temperatures. Compared the DY-1 data to other proxies, it is suggested that the Holocene and Eemian climatic optima developed through a balance among boreal insolation, monsoon intensity, and sea level (also continental ice volume), which are the main climatic forcing factors in the northern hemisphere. These trends also follow the bi-polar seesaw mechanism as previously described.     

Test of the vibrational modelling for the λ-type transitions: Application to the α-β quartz transition

Vibrational modelling is at the present time the only known way to predict the heat capacities of the Earth's mantle minerals at high-pressure and high-temperature. To test the validity of this method for λ-type transitions, we have applied it to the α-β quartz transition (T ₀=846±1 K). Raman spectra of quartz were recorded up to 900 K. Measured frequency shifts of the α-quartz Raman modes were then used in conjunction with available high-pressure Raman data to calculate intrinsic mode anharmonicity, through the parameter a _i=(?Lnv_i/?T)_v. Vibrational modelling of the heat capacity at constant volume, Cv, and at constant pressure, Cp, including anharmonic corrections deduced from the a _i parameters, are compared to experimental data. Taking into account the soft-mode associated to the α-β quartz transition, the model reproduces the excess of Cp related to the transition. Then, this study confirms that detecting a soft-mode from vibrational data allows one to predict λ-type transitions. However, when modelling the thermodynamic properties, the contribution of a soft-mode cannot be established from spectroscopic data. Therefore, one needs first to determine this contribution in order to predict the heat capacities of Earth's mantle minerals displaying λ-type transitions. In α-quartz, this contribution has been determined as 0.007% of the total number of the optic modes in the model of the density of states.