Principal stress rotation and cyclic shear strength for an elliptical rotation stress path

Based on the analytical solutions for wave-induced soil response in an unsaturated anisotropic seabed of finite thickness, an elliptical, i.e., noncircular rotation stress path is proven to be a more common state in a soil element with the cyclic shear stresses due to the traveling linear wave. The influence of an elliptical stress path on the characterization of failure strength is analyzed using three new parameters representing the shape, size, and the orientation of the ellipse. A series of cyclic rotational shear tests on the reconstituted specimens of Chinese Fujian Standard Sand have been performed to investigate the effect of elliptical stress path. A strength function in term of failure cycles is derived to quantify the failure strength of a given sand within a seabed subjected to regular wave loading. The results provide a basis for the evaluation of liquefaction potential of seabed but also point to a unique backbone cycle shear strength curve for soil under principal stress rotation.     

The Global Distribution of Diapycnal Mixing and Mixing Coefficient Tensor in the Upper 2000m Ocean from Argo Observations

Diapycnal Mixing (DM) within the upper 2000m of the global ocean is calculated by a fine-scale parameterization using the multiyear-mean density gridded product that created by employing all the Argo float observations to date through the recently published equation of seawater TEOS-10. The geographic distribution of Argo-derived DM derived in this study is spatial-dependent and varies with latitude and depth. The magnitude and pattern of DM is favorably validated by comparisons with previous studies. Furthermore, the mixing coefficient tensor K is calculated and analyzed. Components of the tensor fitting for the geopotential coordinate models are also presented. It is found that the tensor components in horizontal direction, K_xx and K_yy, have similar magnitude and distribution pattern. In the vertical, K_zz is enhanced over regions with rough topography and strong wind (e.g., Westerly region), suggesting agreement with previous estimates. This work presents a scheme to estimate the DM and mixing coefficient tensor using Argo observations, and offers a useful Argo-based mixing product for the purpose of promoting the study and modeling of ocean circulation and other processes.     

Theoretical assessment of burst failure of internally pressurized defect-free pipelines with plastic anisotropy

In the framework of finite deformation theory, the burst failure analysis of end-opened defect-free pipes with plastic anisotropy under internal pressure is carried out. The analytical solutions of burst pressure and the corresponding equivalent stress and strain are obtained for thin-walled pipes, which can take into account the effects of material plastic anisotropy and strain hardening exponent. The influences of plastic anisotropy on the burst pressure and the corresponding equivalent stress and strain are discussed. It is shown that the burst pressure and the corresponding equivalent stress and strain are dependent upon the plastic anisotropy of material, and the degree of dependence is related to the strain hardening exponent of material. In addition, the effects of the strain hardening exponent on burst failure are investigated.     

中西太平洋延绳钓黄鳍金枪鱼渔场时空分布与温跃层关系

为了解热带中西太平洋延绳钓黄鳍金枪鱼(Thunnus albacares)适宜的温跃层参数分布区间,采用Argo浮标温度信息和中西太平洋渔业委员会(The Western and Central Pacific Fisheries Commission,WCPFC)的黄鳍金枪鱼延绳钓渔获数据,绘制了热带中西太平洋月平均温跃层特征参数和月平均CPUE的空间叠加图,用于分析热带中西太平洋黄鳍金枪鱼中心渔场时空分布和温跃层特征参数间的关系。分析结果表明:热带中西太平洋温跃层上界深度、温度具有明显的季节性变化,而温跃层下界深度、温度季节性变化不明显,黄鳍金枪鱼中心渔场分布和温跃层季节性变化有关。全年中心渔场的位置分布在温跃层上界深度高值区域,随温跃层上界深度高值区域季节性南北移动。在新几内亚以东纬向区域(5°N~10°S,150°E~170°W)上界深度值全年都在70~100m之间,全年都是延绳钓黄鳍金枪鱼中心渔场。中心渔场上界温度多在26℃以上,但是在上界温度超过30℃区域,CPUE值较小。中心渔场主要分布在温跃层下界深度两条高值带之间区域,在温跃层下界深度超过300m和小于150m区域,CPUE值均偏低。中心渔场主要分布在下界温度低于13℃区域,下界温度超过17℃难以形成中心渔场。频次分析和经验累积分布函数计算其适宜温跃层特征参数分布,得出中西太平洋黄鳍金枪鱼适宜的温跃层上界温度和深度分别是27~29.9℃和70~109m;适宜的温跃层下界温度和深度分别是11~13.9℃和250~299m。文章初步得出中西太平洋黄鳍金枪鱼中心渔场温跃层各特征参数的适宜分布区间及季节变化特征,为我国金枪鱼实际生产作业提供技术支持。     

黄河三角洲滨海湿地沉积环境演化与碳的累积

2007年在黄河三角洲布设一口23.7 m深的浅钻(ZK5),对ZK5进行沉积学观测及原位密度、总碳、有机碳、Al和营养元素实验室测试分析,对ZK5的沉积物性质、有孔虫种类和地层等进行分析,将ZK5自上而下划分为7个沉积环境,揭示了滨海湿地地质演化过程。利用AMS14C测年方法,结合黄河改道的历史,运用历史地理学和沉积地质学综合分析的方法对7个沉积地层进行了年代确定。利用所确定的年代计算了不同沉积环境总碳(TC)和有机碳(Corg)的加积速率。结果表明:TC和Corg与各营养元素及沉积物的沉积速率呈很好的线性相关,沉积物的沉积速率是Corg和TC加积速率的主控因素。还进一步指出,虽然现代黄河三角洲TC、Corg浓度相对较低(质量比分别为9~20 mg/g,1~4 mg/g),但由于其高沉积速率(最高可达60 cm/a),Corg的加积速率高于世界其他高Corg浓度的湿地,特别是浅海湿地(如三角洲前缘),其Corg加积速率可高达2 102 g/(m2·a)。由此,可以断言现代黄河三角洲是很好的碳汇地质体。     

楚科奇海盆M04柱晚更新世以来沉积古环境记录

对"中国第五次北极科考"采自楚科奇海盆的M04柱进行粒度、冰筏碎屑、黏土矿物、岩心XRF扫描、沉积物颜色分析,初步建立了楚科奇海盆晚更新世MIS4期以来的沉积地层框架。MIS4期以来,楚科奇海盆M04柱沉积物粒度和黏土矿物组成具有明显的冰期/间冰期变化特征,冰期沉积物粒度分布以双峰态为主,由洋流搬运和海冰搬运沉积组分组成,伊利石含量高、高岭石含量低;间冰期沉积物具有三峰态粒度分布特征,由海冰搬运、洋流搬运和冰山搬运沉积组分组成,伊利石含量低、高岭石含量高。通过M04柱黏土矿物组合类型与北冰洋边缘海盆的表层沉积物黏土矿物组合类型对比表明,晚更新世以来楚科奇海盆沉积环境发生显著变化:温暖的间冰期受波弗特涡流驱动,波弗特海为研究区的物源输入提供了主要贡献;寒冷的冰期表层环流呈反向输运,细颗粒物源碎屑以东西伯利亚海的输入为主。     

加拿大海盆北部营养盐限制作用研究

利用2008年夏季中国第三次北极科学考察获得的营养盐、叶绿素a、温度和盐度等数据资料,结合现场营养盐添加实验的结果讨论西北冰洋加拿大海盆北部营养盐对浮游植物生长的限制作用。结果表明:由于融冰水稀释作用,加拿大海盆B80站约20m深度存在较强的盐跃层,阻碍了水体上下混合。较低浓度的溶解无机氮(DIN)和硅酸盐(分别为0.31μmol/L和0.94μmol/L)以及严重偏离Redfield比值的N/P、N/Si比值(分别为0.42和0.32)表明加拿大海盆表层水体存在N和Si限制。根据现场营养盐加富实验各培养组叶绿素a浓度变化、营养盐吸收总量差异和浮游植物种群结构,进一步表明氮是北冰洋海盆首要限制营养盐,而Si则抑制了硅质生物的生长。同时,较小的硝酸盐半饱和常数(Ks)证明即使在营养盐充足的情况下北冰洋海盆浮游植物生长速率也处于较低水平。计算得到各培养组营养盐吸收比例(N/P比值)均大于Redfield比值,可能是培养实验过程中以微型、微微型浮游植物为主,硅藻等小型浮游植物为辅造成的。     

鲜浒苔稀硫酸水解产糖工艺研究

分别用质量分数为0.6%、1.0%、1.4%、1.8%、2.2%的稀硫酸在121℃高温高压的条件下水解鲜浒苔30、60、90 min,浒苔水解残留物再用纤维素酶酶解,用DNS法测定上述各步骤中的还原糖产量。结果表明,浒苔总糖含量为67.2%。稀硫酸水解工艺中,硫酸质量分数为1.8%、水解90 min,浒苔还原糖转化率最高,达59.9%,每克干质量浒苔可产生447.0 mg还原糖。稀硫酸水解残留物纤维素酶酶解工艺中,浒苔还原糖转化率较低,在硫酸质量分数为0.6%、水解时间为60 min时还原糖转化率出现最大值,仅为6.5%。结果显示浒苔稀硫酸水解产还原糖效果显著,但并不能促进纤维素酶酶解。浒苔糖化可单独采用稀硫酸水解工艺,本实验条件下的最佳工艺条件为1.8%硫酸水解90 min。本研究探索了浒苔糖化工艺条件,对后续的浒苔燃料乙醇发酵研究具有一定的参考意义。     

Simulation of the extreme waves generated by typhoon Bolaven (1215) in the East China Sea and Yellow Sea

Record-breaking high waves occurred during the passage of the typhoon Bolaven (1215) (TYB) in the East China Sea (ECS) and Yellow Sea (YS) although its intensity did not reach the level of a super typhoon. Winds and directional wave measurements were made using a range of in-situ instruments mounted on an ocean tower and buoys. In order to understand how such high waves with long duration occurred, analyses have been made through measurement and numerical simulations. TYB winds were generated using the TC96 typhoon wind model with the best track data calibrated with the measurements. And then the wind fields were blended with the reanalyzed synoptic-scale wind fields for a wave model. Wave fields were simulated using WAM4.5 with adjustment of C_d for gust of winds and bottom friction for the study area. Thus the accuracy of simulations is considerably enhanced, and the computed results are also in better agreement with measured data than before. It is found that the extremely high waves evolved as a result of the superposition of distant large swells and high wind seas generated by strong winds from the front/right quadrant of the typhoon track. As the typhoon moved at a speed a little slower than the dominant wave group velocity in a consistent direction for two days, the wave growth was significantly enhanced by strong wind input in an extended fetch and non-linear interaction.     

从五台山下前寒武系变形特征论某些构造形迹的运动学意义

分布在五台山区的早前寒武纪五台群和滹沱群,遭受了多期变形和变质,小型构造发育。层理配置反映变形性质和程度;片理(劈理)为早世代挤压-剪切褶皱的轴面片理,又成为晚世代弯滑褶皱的滑动面;线理(压扁拉长的砾石、杏仁体和矿物集合体)垂直于早世代褶皱枢纽,为a线理;这一运动学特征在显微组构中亦有反映。本区发现了“折射变位”、“非共面反射变位”和“共面反射变位”等褶皱枢纽变位轨迹。上述构造形迹可为运动学分析提供依据,可对造山带的重要性质获得广泛的理解。