Geochronological and isotopic records of crustal storage and assimilation in the Wolverine Creek–Conant Creek system,Heise eruptive centre,Snake River Plain

Understanding the processes of differentiation of the Yellowstone–Snake River Plain (YSRP) rhyolites is typically impeded by the apparent lack of erupted intermediate compositions as well as the complex nature of their shallow interaction with the surrounding crust responsible for their typically low O isotopic ratios. A pair of normal-δ¹⁸O rhyolitic eruptions from the Heise eruptive centre in eastern Idaho, the Wolverine Creek Tuff and the Conant Creek Tuff, represent unique magmatic products of the Yellowstone hotspot preserving abundant vestiges of the intermediate differentiation steps leading to rhyolite generation. We address both shallow and deep processes of magma generation and storage in the two units by combining high-precision ID–TIMS U–Pb zircon geochronology, trace element, O and Hf isotopic studies of zircon, and Sr isotopic analyses of individual high-Mg# pyroxenes inherited from lower- to mid-crustal differentiation stages. The zircon geochronology confirms the derivation of both tuffs from the same rhyolitic magma reservoir erupted at 5.5941 ± 0.0097 Ma, preceded by at least 92 ± 14 ky of continuous or intermittent zircon saturation approximating the length of pre-eruptive magma accumulation in the upper crust. Some low-Mg# pyroxenes enclosing zircons predate the eruption by at least 45 ± 27 ky, illustrating the co-crystallisation of major and accessory phases in the near-liquidus rhyolitic melts of the YSRP over a significant period of time. Coeval zircon crystals are isotopically heterogeneous (two populations at εHf ~?5 and ?13), requiring the assembly of isotopically distinct melt pockets directly prior to, or during, the eruption. The primitive Mg# 60–90 pyroxenes are out of isotopic equilibrium with the host rhyolitic melt (⁸⁷Sr/⁸⁶Sr_i = 0.70889), covering a range of ⁸⁷Sr/⁸⁶Sr_i = 0.70705–0.70883 corresponding to ratios typical of the most radiogenic YSRP basalts to the least radiogenic YSRP rhyolites. Together with the low εHf in zircon, the Sr isotopic ratios illustrate limited assimilation dominated by radiogenic Archean crustal source materials incorporated into variably evolved YSRP melts as they progress towards rhyolitic compositions by assimilation–fractional crystallisation.     

Evolution of melt composition during intrusion of basalts into a silicic magma chamber

The article describes heat exchange between basaltic and rhyolite melts accompanied by fractional crystallization of phases in a basaltic melt. A numerical model has been developed for the homogenization mechanism of magma composition during intrusion of basaltic magma batches into felsic magma chambers. The results of numerical modeling demonstrate that the time needed for cooling the basalts and their fractionation to rhyolite melts is much shorter than the time required for chemical interaction based on diffusive mechanisms.     

Time frame of 753–680 Ma juvenile accretion during the São Gabriel orogeny,southern Brazilian Shield

The time frame of the three main geological events in the Neoproterozoic Cambaí Complex, juvenile São Gabriel belt in the southern Brazilian Shield is established by integrating field mapping, back-scattered electron imaging and sensitive high-resolution ion microprobe (SHRIMP II) U–Pb dating of 96 zircon crystals from nine granitic and metasedimentary rock samples. The three events are: (1) voluminous flat-lying paragneisses (Cambaizinho Complex) and orthogneisses (Vila Nova gneisses) between 735 and 718 Ma, (2) tonalite–trondhjemite association (Lagoa da Meia-Lua Suite) between 710 and 690 Ma, and (3) late granodiorite intrusions (Sanga do Jobim Suite) at 680 Ma. An additional older volcanic event (Campestre Formation) was dated at 753 Ma. These results are most significant for the reconstruction of West Gondwana.     

Neoproterozoic Volhynia-Brest magmatic province in the western East European craton: Within-plate magmatism in an ancient suture zone

The reasons for the isotopic and geochemical heterogeneity of magmatism of the Neoproterozoic large Volhynia-Brest igneous province (VBP) are considered. The province was formed at 550 Ma in response to the break up of the Rodinia supercontinent and extends along the western margin of the East European craton, being discordant to the Paleoproterozoic mobile zone that separates Sarmatia and Fennoscandia and the Mesoproterozoic Volhynia-Orsha aulacogen. The basalts of VBP show prominent spatiotemporal geochemical zoning. Based on petrographic, mineralogical, geochemical, and isotopic data, the following types of basalts can be distinguished: olivine-normative subalkaline basalts consisting of low-Ti (sLT, < 1.10–2.0 wt % TiO₂; ε_Nd(550) from ?6.6 to ?2.7) and medium-Ti (sMT, 2.0–3.0 wt % TiO₂, occasionally up to 3.6 wt % TiO₂; ε_Nd(550) from ?3.55 to + 0.6) varieties; normal quartz-normative basalts (tholeiites) including low-Ti (tLT, < 1.75–2.0 wt % TiO₂) and medium-to-high-Ti (tHT1, 2.0–3.6 wt % TiO₂, ε_Nd(550) from ?1.3 to + 1.0) varieties. The hypabyssal bodies are made up of subalkaline low-Ti olivine dolerites (LT, 1.2–1.5 wt % TiO₂; ε_Nd(550) = ?5.8) and subalkaline high-Ti olivine gabbrodolerites (HT2, 3.0–4.5 wt % TiO₂; ε_Nd(550) = ?2.5). Felsic rocks of VBP are classed as volcanic rocks of normal (andesidacites, dacites, and rhyodacites) and subalkaline (trachyrhyodacites) series with TiO₂ 0.72–0.77 wt% and ε_Nd(550) of ?12. The central part of VBP is underlain by a Paleoproterozoic domain formed by continent-arc accretion and contains widespread sills of HT2 dolerites and lavas of LT basalts; the northern part of the province is underlain by the juvenile Paleoproterozoic crust dominated by MT and HT1 basalts. MT and LT basalts underwent significant AFC-style upper crustal contamination. During their long residence in the upper crustal magmatic chambers, the basaltic melts fractionated and caused notable heating of the wall rocks and, correspondingly, nonmodal melting of the upper crustal protolith containing high-Rb phase (biotite), thus producing the most felsic rocks of the province. The basalts of VBP were derived from geochemically different sources: probably, the lithosphere and a deep-seated plume (PREMA type). The HT2 dolerites were generated mainly from a lithospheric source: by 3–4% melting of the geochemically enriched garnet lherzolite mantle. LT dolerites were obtained by partial melting of the modally metasomatized mantle containing volatile-bearing phases. The concepts of VBP formation were summarized in the model of three-stage plume-lithosphere interaction.     

Adsorption of Heavy Metal Cations by Base Metal Sulfides in the Broken Spur and TAG Hydrothermal Fields,Atlantic Ocean

Data on the mineral and chemical composition of samples of sulfide deposits from the Broken Spur and TAG (Mid-Atlantic Ridge) are presented. The main minerals in the Broken Spur field are marcasite, pyrrhotite, pyrite, chalcopyrite, and sphalerite; in sample from TAG: chalcopyrite, pyrite, and marcasite. It has been established that these sulfide minerals of Fe, Cu, and Zn are natural ion exchangers and belong to the class of adsorbents. Exchange capacity of sulfide minerals in terms of heavy metal cations (Ni2+, Co2+, Cd2+, and Pb2+) is 0.022–0.32 mg-equiv/g. In the exchange reaction products, the mineral composition of sulfide deposits is retained, and new phases do not appear. It is suggested that the adsorbed heavy metal cations populate either vacant cationic or interstitial defect sites in the structures of sulfide minerals. Bond strength of the adsorbed heavy metal cations with the main structural elements of minerals is low, which is confirmed by their high extraction in an acid medium. The results of adsorption-desorption experiments indicate two forms of heavy metal cations in sulfide minerals: adsorbed (basic) and chemically bound.     

Magnetic measurements in electrical prospecting by resistivity methods

The electrical resistivity and induced polarization (IP) methods are widely used in geological mapping, prospecting and exploration of mineral deposits, engineering geology, hydrogeology, archaeology, and geotechnical and environmental applications. Historically, these methods have formed the basis of the electrical prospecting technique. In these methods, a DC or low-frequency AC electrical current is introduced into the earth through a grounded transmitter line. The measured quantity is the electric field. However, if the earth’s resistivity or chargeability changes horizontally, this change gives rise to an anomalous magnetic field, which is studied by the magnetometric resistivity (MMR) and magnetic induced polarization (MIP) methods, respectively. Along with advantages, some shortcomings are inherent in the MMR and MIP techniques. Apparently, the main drawback of these methods is that the magnetic fields of both the transmitter line wire and ground electrodes on the surface are several orders of magnitude greater than the anomalous magnetic field response. This introduces a significant “noise” to magnetic-resistivity data. We investigate the potential of using a circular electric dipole (CED) in magnetometric resistivity techniques. It has been found that the application of a CED, instead of a conventional transmitter line, dramatically enhances the signal-to-noise ratio.     

Radio identification and continuum spectra of decameter-wavelength sources

The paper describes a method for the radio identification of decameter-wavelength sources based on their continuum spectra and analysis of their coordinates in relatively large error boxes surrounding a specified position on the sky. The distribution of continuum spectra and identifications in other wavelength ranges are analyzed for the resulting radio catalog. Using identifications with the FIRST and NVSS surveys, the statistics of the spectral index-size and spectral index-flux density distributions for steep-spectrum sources have been studied, and a catalog of ultrasteep-spectrum (α相似文献   

Geographical model for precise agriculture monitoring with real-time remote sensing

This paper presents a remote sensing model for crop monitoring that was developed by the authors in a multi-year study. It also presents two experiments conducted for testing a newly developed application. The model combines remote sensing models using mapping of the spatial distribution of vegetation in an agricultural field, with precision agricultural models that maximize the output (yield) while minimizing the input (cost). This combination enables one to operate a monitoring and management process that includes every sub-unit of the field using remote sensing mapping.The model consists of five steps: (1) Preparing information layers that map the crop-affecting elements, e.g. irrigation and topography; (2) Collecting spectral and plant data simultaneously; (3) Processing and analyzing the data in order to prepare vegetation maps; (4) Decision-making in accordance with the above-mentioned maps or with predicted-yield maps; and (5) Quality control.The experiments showed that although the results were not statistically significant, the application of the proposed model enables one to draw recommendations within 45 h, and that remote sensing monitoring results in more benefits than do traditional control methods. The quality control was not ideal, due to the narrow range of the spectrum used in the remote sensing monitoring.