IGS Earth Rotation Parameters

Since its official start in January 1994, the International GPS Service (IGS) has been distributing, as part of its product combination, two distinct Earth rotation parameter (ERP) series: the IGS Rapid series and the IGS Final series. Initially, the IGS Rapid ERP values were interpolations of the International Earth Rotation Service (IERS) Bulletin A, whereas the IGS Final ERP series was based on the IERS Bulletin B. Since June 1996, the IGS has been generating its own Final ERP series consistent with the IGS combined orbit products and based on weighted means of individual IGS analysis center (AC) solutions. At first, only the polar motion (PM) coordinates and their rates were combined. Length of Day (LOD) and Universal Time (UT) solutions, also based on separate weighted mean combinations, followed in March 1997. Currently, the IGS Rapid and Final combinations are produced and made available within 17 hours and 11 days, respectively, after the last observation. Both IGS and the best AC series are consistent and precise at the 0.1-milliarcsecond (mas) level for PM and at about 30 μs for LOD. Biases in some AC solutions may exceed these consistency levels. Comparisons of both IGS ERP series with external standards, such as the IERS multitechnique Bulletins and atmospheric angular momentum series, confirm the estimated precisions. ? 1999 John Wiley & Sons, Inc.     

Drainage Network Modelling for Water-Sensitive Urban Design

While drainage network models may be relatively easy to assemble as a prerequisite to site selection for infrastructure supporting suburbanisation with Water-Sensitive Urban Design (WSUD), this is unlikely to be the case if the terrain is very subdued. Both ab initio and retro-fit WSUD implementation for such terrain refers, in the first instance, to a drainage network model that includes information on the scope for optimising residential space while conforming to: (1) statutory planning rules about the provision of public open space; and (2) WSUD drainage network design such that runoff waters are retained long enough to allow at least temporary storage. It is shown in this research that a technique applied to condition a LiDAR DEM can accurately model the drainage network of a basin at the land-parcel scale. The drainage network for ab initio WSUD is best defined using multi-flow modelling, with the relative significance of stream segments indicated by their stream order derived using the Strahler method. In contrast, when applying the retro-fit WSUD, the relative significance of segments given by the Shreve stream order method was found to be more useful. The approaches described in this article are designed to support the initial site planning stage and avoid the need for immediate and expensive detailed field survey. At the same time they can be deployed to show how much scope there is for WSUD retro-fit in established housing areas up-stream of an infill development area. Thus, basin-wide appraisal is facilitated and the need for earthmoving is minimised.     

XXIst International Congress of Photogrammetry and Remote Sensing

The XXIst International Congress of Photogrammetry and Remote Sensing was held at the Beijing International Convention Centre, China, from 3rd to 11th July 2008. Reports are given on the Congress as a whole, including the General Assembly, some Technical Commission activities and the Congress Exhibition. Papers from the Congress are published in Volume XXXVII of the International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences.     

High-Reflectivity Coatings for a Vacuum Ultraviolet Spectropolarimeter

Precise polarization measurements in the vacuum ultraviolet (VUV) region are expected to be a new tool for inferring the magnetic fields in the upper atmosphere of the Sun. High-reflectivity coatings are key elements to achieving high-throughput optics for precise polarization measurements. We fabricated three types of high-reflectivity coatings for a solar spectropolarimeter in the hydrogen Lyman-\(\upalpha \) (Ly\(\upalpha \); 121.567 nm) region and evaluated their performance. The first high-reflectivity mirror coating offers a reflectivity of more than 80 % in Ly\(\upalpha \) optics. The second is a reflective narrow-band filter coating that has a peak reflectivity of 57 % in Ly\(\upalpha \), whereas its reflectivity in the visible light range is lower than 1/10 of the peak reflectivity (\(\sim 5~\%\) on average). This coating can be used to easily realize a visible light rejection system, which is indispensable for a solar telescope, while maintaining high throughput in the Ly\(\upalpha \) line. The third is a high-efficiency reflective polarizing coating that almost exclusively reflects an s-polarized beam at its Brewster angle of 68° with a reflectivity of 55 %. This coating achieves both high polarizing power and high throughput. These coatings contributed to the high-throughput solar VUV spectropolarimeter called the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP), which was launched on 3 September, 2015.     

Dissolved oxygen dynamics in a eutrophic estuary,Upper Newport Bay,California

Eutrophication often causes hypoxia in estuarine and coastal systems, but the mechanisms that control hypoxic events vary among estuaries and are often difficult to discern. We monitored surface and bottom dissolved oxygen (DO) in the Upper Newport Bay (UNB), a tidally mixed estuary in southern California subject to anthropogenic nutrient loading, eutrophication and hypoxia. Our goal was to identify the environmental factors regulating DO dynamics. Six hypoxic events occurred between June and November and were associated with a combination of low solar radiation, increased freshwater discharge following precipitation, and enhanced haline stratification during reduced tidal range periods. At the head of the estuary, high macroalgal biomass and pronounced haline stratification resulted in high DO in the surface layer and low DO in the bottom layer. Oxygen-rich and oxygen-poor waters were transported down-estuary by ebb tides, resulting in DO heterogeneity throughout the UNB. Cross-wavelet analysis illustrated the down-estuary propagation of high/low DO signal correlated with the phases of diurnal photosynthetic and semi-diurnal tidal cycles.     

Relaxed Eddy Accumulation Simulations of Aerosol Number Fluxes and Potential Proxy Scalars

Direct eddy-covariance measurements of aerosol number fluxes obtained during the 2007 CHATS field experiment in Dixon, California, USA are compared with relaxed eddy accumulation simulations using temperature and water vapour concentration as proxy scalars. After a brief discussion of the limited time response of the aerosol measurement, the applicability of temperature and water vapour concentration as proxy scalars for aerosol number concentration is investigated by evaluating scalar and spectral correlation coefficients as simple measures of scalar similarity. In addition, the proportionality factor b, which compensates for the use of a constant sampling flow in relaxed eddy accumulation, is derived from the time series of aerosol number, temperature and water vapour, and its variability is analyzed. The reduction of the b factor due to application of a deadband, i.e. the rejection of data when the vertical wind speed is close to zero, is evaluated for all three studied scalars, and compared with published functional relationships. In this study, using temperature or water vapour as proxy scalars for aerosol number shows no advantage over the use of a constant b factor. Thus, it is suggested to apply a deadband H _REA  = w′/σ _w  = 0.6 to 0.8 (where w′ is the vertical velocity fluctuation and σ _w is its standard deviation), to use a theoretical b factor based on a parameterization that includes a stability dependence, and to calculate the deadband effect according to a derived relation for aerosol relaxed eddy accumulation.     

Geochemical evolution of halogen-enriched granite magmas and mineralizing fluids of the Zinnwald tin-tungsten mining district,Erzgebirge, Germany

We remelted and analyzed crystallized silicate melt inclusions in quartz from a porphyritic albite-zinnwaldite microgranite dike to determine the composition of highly evolved, shallowly intruded, Li- and F-rich granitic magma and to investigate the role of crystal fractionation and aqueous fluid exsolution in causing the extreme extent of magma differentiation. This dike is intimately associated with tin- and tungsten-mineralized granites of Zinnwald, Erzgebirge, Germany. Prior research on Zinnwald granite geochemistry was limited by the effects of strong and pervasive greisenization and alkali-feldspar metasomatism of the rocks. These melt inclusions, however, provide important new constraints on magmatic and mineralizing processes in Zinnwald magmas.The mildly peraluminous granitic melt inclusions are strongly depleted in CAFEMIC constituents (e.g., CaO, FeO, MgO, TiO₂), highly enriched in lithophile trace elements, and highly but variably enriched in F and Cl. The melt inclusions contain up to several thousand ppm Cl and nearly 3 wt% F, on average; several inclusions contain more than 5 wt% F. The melt inclusions are geochemically similar to the corresponding whole-rock sample, except that the former contain much more F and less CaO, FeO, Zr, Nb, Sr, and Ba. The Sr and Ba abundances are very low implying the melt inclusions represent magma that was more evolved than that represented by the bulk rock. Relationships involving melt constituents reflect increasing lithophile-element and halogen abundances in residual melt with progressive magma differentiation. Modeling demonstrates that differentiation was dominated by crystal fractionation involving quartz and feldspar and significant quantities of topaz and F-rich zinnwaldite. The computed abundances of the latter phases greatly exceed their abundances in the rocks, suggesting that the residual melt was separated physically from phenocrysts during magma movement and evolution.Interactions of aqueous fluids with silicate melt were also critical to magma evolution. To better understand the role of halogen-charged, aqueous fluids in magmatic differentiation and in subsequent mineralization and metasomatism of the Zinnwald granites, Cl-partitioning experiments were conducted with a F-enriched silicate melt and aqueous fluids at 2,000 bar (200 MPa). The results of the experimentally determined partition coefficients for Cl and F, the compositions of fluid inclusions in quartz and other phenocrysts, and associated geochemical modeling point to an important role of magmatic-hydrothermal fluids in influencing magma geochemistry and evolution. The exsolution of halogen-charged fluids from the Li- and F-enriched Zinnwald granitic magma modified the Cl, alkali, and F contents of the residual melt, and may have also sequestered Li, Sn, and W from the melt. Many of these fluids contained strongly elevated F concentrations that were equivalent to or greater than their Cl abundances. The exsolution of F-, Cl-, Li-, ± W- and Sn-bearing hydrothermal fluids from Zinnwald granite magmas was important in effecting the greisenizing and alkali-feldspathizing metasomatism of the granites and the concomitant mineralization.Editorial Handling: B. Lehmann     

Jarosite growth zoning as a recorder of fluid evolution

Growth zoning in jarosite, an Fe³⁺-bearing sulfate mineral, can generally be characterized by variation of Na⁺ for K⁺ in the crystallographic A site or by Al³⁺ for Fe³⁺ in the octahedral (B) site. Growth zoning in a sample from Post Pit, NV, however, is more complicated than has been observed in other jarosite samples examined in this study and by previous work, and is characterized by varying Ba, Sr, P, and As. In this sample, these elements define a coupled substitution in which Ba²⁺ and Sr²⁺ substitute for K⁺ in the crystallographic A site, and are balanced by the substitution of P⁵⁺ and As⁵⁺ for S⁶⁺ in the tetrahedral (X) site. The Post Pit sample also exhibits a high concentration of V, which does not appear to participate in the aforementioned coupled substitution. Analysis of mineral stoichiometry and charge balance reveal that V is likely tetravalent, and represents a charge excess in the B site. The occurrence of V-bearing goethite in this sample records fluctuating fluid pH, resulting in the alternating stability of jarosite and goethite. Measurement of the REEs in jarosite by SIMS, indicate that Ce is trivalent in the Post Pit sample; reduced relative to Ce⁴⁺ found in the remainder of the sample suite. The presence of V⁴⁺ and Ce³⁺ indicate that the Post Pit sample was deposited in a less oxidizing environment than the remainder of the sample suite. This study illustrates how jarosite crystal chemistry can be used to place relative constraints on fluid conditions (pH, Eh, chemistry, etc.) in the terrestrial environment, and characterizes possible major and trace element coupled substitutions into the jarosite crystal structure. Furthermore, this study provides a framework for future studies to examine mineral-fluid partition coefficients (D values) which may place more absolute constraints on fluid chemistry in the jarosite depositional environment.