青藏高原沙漠化土地空间分布及区划

利用野外调查数据、遥感影像和已有研究成果,构建了一套适用于青藏高原沙漠化土地的分类分级指标体系及遥感解译标志。以此为基础,选取目视解译法监测青藏高原沙漠化土地的空间分布特征。结果表明：2015年青藏高原沙漠化土地面积392 913km²,占高原土地总面积的15.1%,主要包括沙质沙漠化土地、砾质沙漠化土地和风蚀残丘3种类型。沙漠化土地以中度和轻度沙漠化土地为主,重度和极重度沙漠化土地面积仅占沙漠化土地总面积的12.2%。空间上,沙漠化土地集中分布在高原的北部和西部地区,其他地区零散分布。自东南向西北,沙漠化土地面积逐渐增大,沙漠化程度不断加重。以沙漠化土地空间分布数据（面积、类型、程度、空间特征和驱动因素）为基础,结合气候、地貌、第四纪沉积物和人类活动等数据,将青藏高原沙漠化区划分为雅鲁藏布江半干旱高山宽谷沙漠化区、藏北青南高寒高原面沙漠化区、柴达木干旱盆地沙漠化区、黄河上游半干旱河流盆地沙漠化区和“三江”流域湿润半湿润高山沙漠化区。     

Characterizing mixed-use buildings based on multi-source big data

To-date few research has successfully integrated big data from multiple sources to characterize urban mixed-use buildings. In this paper, we introduce a probabilistic model to integrate multi-source and geospatial big data (social network data, taxi trajectories, Points of Interest and remote sensing images) to characterize urban mixed-use buildings. The usefulness of our model is demonstrated with a case study of the Tianhe District in megacity Guangzhou, China. The model predicted building functions at 85% accuracy based on ground truth data from field surveys. We further explored the spatial patterns of the identified building functions. Most mixed-use buildings are located along major streets. Our proposed model can identify mixed-use buildings in a city; information is useful for planning evaluation and urban policymaking.     

云粒子测量系统的定标方法研究

云粒子测测量系统是开展云降水物理和人工影响天气研究的关键测量仪器。目前我国使用的这类仪器主要是由国外进口。不仅仪器的定标依赖于厂家使得用户在时间和经济上的代价很大,而且传统的玻璃珠定标方法也存在易粘连等缺陷。针对这个现状,提出一种新的定标方法。利用成熟的喷墨打印技术和视觉测量技术,产生可控、稳定的5种直径(10~50μm)连续微水滴,来定标云粒子测量仪器。本文详细描述了实现此定标方法的系统原型结构,分析了影响系统工作性能的因素,通过对同一CDP(Cloud Droplet Probe)探头定标与传统方法进行对比。结果表明,此方法能够满足云粒子测量系统的定标需求,该定标方法较传统方法易于控制且性能良好。     

Numerical Simulation of Abnormal Wave Height Change Induced by Excavated Waterway with Boussinesq Equation

A nonlinear numerical model has been set up by use of Boussinesq Equation with finite differ-ence method,and has been applied to the simulation of the abnormal change of wave height induced by ex-cavated waterway.Numerical results demonstrate that the abnormal change of wave height is due to theadding of the reflected wave height induced by excavated waterway to the incident wave height.Becausethe angle between the incident wave and the axis of the waterway is smaller than the critical angle,the re-flected wave produced by the waterway may propagate to the breakwater and may be added with the inci-dent wave,then the abnormal change of wave height before the breakwater may be caused.So the wave re-flection caused by the change of water depth cannot be neglected.     

地震前兆群体空间非均匀性指标Cv值研究

本文描述了排除地台站空间分布不均匀、台站观测项目数量不同等非地震成因因素影响后的前兆群体空间非均匀性研究思路及其指标Ｃｖ值,确定了Ｃｖ值反映的前兆群体空间分布图象的类型及其判定方法。利用Ｃｖ值对华北地区１９９５年以来的水氡短临前兆异常群体空间非均匀性及其与地震的关系进行了分析,结果表明,华北地区１９９５年１月１日至１９９８年２月１日发生的５次５级以上中强地震前,前兆群体空间分布出现５次非均匀性增强     

Study on seismic numerical model on the Chinese mainland and its vicinity

IntroductionSeismicprocessisextremelycomplicatedjustashasbeenprovedbytheeallhquakepredictionpractice.Thecomplexityofseismicprocessmainlydisplaystheinhomogeneityofseismicspace-timedistribution.Therearealotoffactorscausingthecomplexity,includingthemediumofseismicsource,themechanicalprocessofseismicsource,mutualeffectofgroupseismicactivity,andsoon.Studyontheseismicactivitylawstillremainsinalowlevel,especiallyintheaspectofseismicoccurrenceprocess.Manyscholarstrytostudytheseismicactivebehavioringr…     

试谈地震科技图书馆现代化建设

以山西省地震局地震科技图书馆为例 ,阐述了建立地震科技文献信息网的必要性和网络化建设构想。提出了电子阅览室的设想和实现途径 ,并对网络管理员的特点和基本工作进行了论述     

川西高温水热活动区深部热结构的地球物理分析

川西高温水热活动区是地热学研究的典型地区之一,该区温泉、热泉点分布广泛,这些温泉大多沿北西-南东向的金沙江断裂、德格-乡城断裂、甘孜-理塘断裂、鲜水河三条主断裂呈条带状分布.对此高温水热活动区开展地热学分析,是研究青藏高原"东构造结"深部地球动力学过程、开发利用川西高原地热资源的重要基础,具有重要的科学研究意义和实际应用价值.本文针对实测氦同位素所发现的壳幔热结构比,依据重力、航空磁法、地震资料,采用反演莫霍面、居里面深度等方法,对川西高温水热活动区的深部热结构进行了分析.同时对中高温热泉密集出露的巴塘、理塘以及康定水热活动区的典型壳幔热流构与深部背景场进行了对比研究.结果表明,地表氦同位素热流估算的深部热流结构与地球物理异常结果保持较好的对应关系.川西地区热流结构中地壳、地幔的热贡献比较接近：巴塘地区平均Q_c/Q=51.38%、理塘地区平均Q_c/Q=54.39%、康定地区平均Q_c/Q=42.42%.川西地区表现出了"温壳温幔"型的深部热结构,但温地壳背景下形成较高地表热流的原因有待进一步研究.     

CIC-200型离子色谱仪常见故障解析

结合夏县中心地震台CIC-200型离子色谱仪实际观测,从仪器输液系统、分离系统、基线、管路等方面详细阐述色谱仪常见故障,逐一分析原因,并给出相应故障排除方法,为同类仪器维护提供参考,并为获得准确观测数据,延长仪器使用寿命,提出日常维护方法及建议。     

Rupture model of the 2013 M_W 6.6 Lushan (China) earthquake constrained by a new GPS data set and its effects on potential seismic hazard

Vertical records are critically important when determining the rupture model of an earthquake, especially a thrust earthquake. Due to the relatively low fitness level of near-field vertical displacements, the precision of previous rupture models is relatively low, and the seismic hazard evaluated thereafter should be further updated. In this study, we applied three-component displacement records from GPS stations in and around the source region of the 2013 MW6.6 Lushan earthquake to re-investigate the rupture model.To improve the resolution of the rupture model, records from both continuous and campaign GPS stations were gathered, and secular deformations of the GPS movements were removed from the records of the campaign stations to ensure their reliability. The rupture model was derived by the steepest descent method(SDM), which is based on a layered velocity structure. The peak slip value was about 0.75 m, with a seismic moment release of 9.89 × 10~(18) N·m, which was equivalent to an M_W6.6 event. The inferred fault geometry coincided well with the aftershock distribution of the Lushan earthquake. Unlike previous rupture models, a secondary slip asperity existed at a shallow depth and even touched the ground surface. Based on the distribution of the co-seismic ruptures of the Lushan and Wenchuan earthquakes, post-seismic relaxation of the Wenchuan earthquake, and tectonic loading process, we proposed that the seismic hazard is quite high and still needs special attention in the seismic gap between the two earthquakes.