几内亚福雷卡里亚YML铁矿区的富铁矿床地质特征及找矿前景探讨

YML铁矿区位于几内亚福雷卡里亚省,富铁矿以条带状赤铁矿和铁角砾岩矿为主。矿区内共发育7条矿体,条带状赤铁矿体6条,铁角砾岩矿体1条。条带状赤铁矿体赋存部位多为向形地段,次级紧密褶皱发育,沿走向和倾向有逐渐变薄和尖灭的趋势;铁角砾岩矿体覆盖于地表,以风化壳的形式出现。矿床类型属复合类型,即海底热液喷气沉积叠加后期构造变质型+风化淋滤型。该区具备铁矿形成和保存的地质条件,且已发现具一定储量、品位较高的条带状赤铁矿和大面积的铁角砾岩分布区,区内铁矿找矿远景较好。     

菲律宾迪纳加特岛30#矿权区红土型镍矿床地质特征及成矿作用探讨

30~#矿权区位于菲律宾迪纳加特岛北部,区内发育有红土型镍矿床。本次勘查圈定4处矿(化)体,其中以Ⅰ、Ⅱ、Ⅲ矿(化)体的矿化范围较大,厚度变化系数为45%~50%(相对稳定),经济价值较高。红土型镍矿体平面上呈地毯状展布于地表,厚度受地形控制,富镍矿体分布于矿权区东部的5、6、11、12小区;剖面上从地表向深部矿体为铁质红土层、松散红土层及高岭土化蛇纹石化橄榄岩层。30~#矿权区红土镍矿矿床的形成经历了从普通矿到富矿两个阶段,红土镍矿石属于酸性矿石。     

川西南荥经坳陷川荥页1井奥陶系沉积相与古生物特征及地层厘定

对川西南荥经坳陷内三口页岩气井尤其是川荥页1井奥陶系开展了系统的岩心观察和分析。三口钻井在梁山组之下均发育十余米厚的灰黑色泥岩,其中川荥页1井灰黑色泥岩厚近16m。沉积相分析认为灰黑色泥岩为浅水陆棚相,泥岩之下发育的大套砂岩为滨岸近滨亚相,总体向上海水逐渐变深。砂岩中发育丰富的沉积软变形构造及波状交错层理、浪成沙纹层理、平行层理、斜层理等构造。川荥页1井上部泥岩中见大量三叶虫、笔石和腕足等化石及其碎片,鉴定表明含有代表中下奥陶统的常见生物分子,如对笔石(Didymograotus sp.)、大洪山虫(Taihungshania sp.)等。该套砂泥岩组合在沉积相及古生物化石等方面明显区别于荥经坳陷周缘奥陶系五峰组—志留系龙马溪组,与研究区及邻区中下奥陶统红石崖组、湄潭组、大湾组、大官山组中段等层位相当。     

Comparative analysis of significant wave height between a new Southern Ocean buoy and satellite altimeter

中国于2019年第35次南极考察中,首次在南大洋布放了锚系实时综合观测浮标(西风带海洋环境监测浮标,WEMB),为深入了解此海区的海洋环境变化提供了宝贵资料.国家海洋技术中心WEMB研究团队基于AVISO公开发布的多颗卫星高度计L3产品,通过数据配对,误差统计和最小二乘线性拟合等方法,对西风带海洋环境监测浮标的有效波高数据误差进行了分析与校正.校正后的浮标有效波高统计显示西风带常年处于大浪以上海况,观测期间内57％处于巨浪海况,并且伴随有高度相关的大风天气.     

机载北斗差分定位系统的测量船应用

针对测量船测控设备传统精度检测方法的局限性,该文提出了使用搭载北斗差分定位系统的无人机检测测控设备测量精度的方案。在充分分析北斗系统应用于精度检测可行性的基础上,研制了一套适用于码头和海上的无人机差分定位系统,并通过该系统的单站静态和双站动态差分实验,验证了基于北斗系统的无人机精度检测系统的性能与精度指标。最后通过测控设备跟踪测量无人机实验,检测了标校经纬仪和脉冲雷达设备的测距、测角精度。     

A new evil waveforms evaluating method for new BDS navigation signals

With the advent of new global navigation satellite systems (GNSSs) and new signals, GNSS users will rely more on them to obtain higher-accuracy positioning. Evil waveform monitoring and assessment are of great importance for GNSS to achieve its positioning, velocity, and timing service with high accuracy. However, the advent of new navigation signals introduces the necessity to extend the traditional analyzing techniques already accepted for binary phase-shift keying modulation to new techniques. First, the well-known second-order step thread model adopted by the International Civil Aviation Organization is introduced. Then the extended new general thread models are developed for the new binary offset carrier modulated signals. However, no research has been done on navigation signal waveform symmetry yet. Simulation results showed that, waveform asymmetry may also cause tracking errors, range biases, and position errors in GNSS receivers. It is thus imperative that the asymmetry be quantified to enable the design of appropriate error budgets and mitigation strategies for various application fields. A novel evil waveform analysis method, called waveform rising and falling edge symmetry (WRaFES) method, is proposed. Based on this WRaFES method, the correlation metrics are provided to detect asymmetric correlation peaks distorted by received signal asymmetry. Then the statistical properties of the proposed methods are analyzed, and a proper deformation detection threshold is calculated. Finally, both simulation results and experimentally measured results of Beidou navigation satellite system (BDS) M1-S B1Cd signal are given, which show the effectiveness and robustness of the proposed thread models.     

A modified three-dimensional ionospheric tomography algorithm with side rays

The three-dimensional ionospheric tomography (3DCIT) algorithm based on Global Navigation Satellite System (GNSS) observations have been developed into an effective tool for ionospheric monitoring in recent years. However, because the rays that come into or come out from the side of the inversion region cannot be used, the distribution of the rays in the edge and bottom part of the inversion region is scarce and the electron density cannot be effectively improved in the inversion process. We present a three-dimensional tomography algorithm with side rays (3DCIT-SR) applying the side rays to the inversion. The partial slant total electron content (STEC) of side rays in the inversion region is obtained based on the NeQuick2 model and GNSS-STEC. The simulation experiment results show that the algorithm can effectively improve the distribution of GNSS rays in the inversion region. Meanwhile, the iteration accuracy has also been significantly improved. After the same number of iterations, the iterative results of 3DCIT-SR are closer to the truth than 3DCIT, in particular, the inversion of the edge regions is improved noticeably. The GNSS data of the International GNSS Service (IGS) stations in Europe are used to perform real data experiments, and the inversion results show that the electron density profiles of 3DCIT-SR are closer to the ionosonde measurements. The accuracy improvement of 3DCIT-SR is up to 56.3% while the improvement is more obvious during the magnetic storm compared to the case of a calm ionospheric state .     

基于面向对象分类土地利用分析

以遥感技术为依托,研究了金普新区在成立以来的土地利用及变更情况。通过实验对比,选用了适合于高分辨率遥感影像的面向对象的分类方法对金普新区2013年的遥感影像进行了分类,成功获取了金普新区2013年的土地利用状况;然后应用金普新区2015年的地理国情普查数据,把普查数据成果与分类出的2013年金普新区土地利用状况有机结合,实现了对金普新区成立后的土地利用对比分析。     

基于DEM的6种坡度提取算法的比较分析——以山东省青岛市为例

坡度是描述地形特征信息的一个重要指标,对于制订土地利用规划和防御地质灾害具有重要意义。本文基于山东省青岛市的ASTER GDEM数据,利用MATLAB进行矩阵运算,采用6种坡度提取算法分别获取坡度矩阵、最大值和中误差等统计指标,对比分析6种算法的提取精度。结果表明:简单差分算法出现极端和偏差情况的概率较高,可信度不高;三阶不带权差分和三阶反距离平方权差分算法比较稳定,偏差较小且精度较高,对沿海地区坡度提取具有借鉴意义。     

测绘应急保障测绘装备和资料的管理研究

通过建立测绘装备和测绘资料数据库,进行装备和资料的查询、分发操作,满足应急保障分队的测绘保障,提高了应急测绘保障能力。