电解法处理船舶压载水的杀菌性能及机理研究

船舶压载水携带的微生物对目的海域的污染问题亟待解决。采用电解法,以渤海湾的海水为处理对象,以炭纤维材料为阴极,分别以碳棒、碳板和炭纤维为阳极,首先考察了施电2.00 V下3种阳极炭材料对应的杀菌效果,进而重点考查了碳板为阳极材料时施加不同槽压下的杀菌性能,并对其杀菌机理进行初步分析。结果表明,3种阳极材料对应的杀菌效果先后顺序为碳棒碳板炭纤维,各自的杀菌效果均较为明显,施电18 min时碳板对应的灭活率可达100%;以碳板为阳极时,施加槽压越高杀菌效果越显著,本研究范围内以1.81 V为佳,施电18 min时灭活率在99%以上;不同槽压下体系中氯离子浓度和p H都随时间整体呈减小趋势,一定程度上可用于解释杀菌作用过程。研究结果可为电解法处理船舶压载水提供参考和借鉴。     

长江口外潮汐精细化模型研究与精度分析

长江口外海上测量除受风浪影响较大外,最重要的问题是潮位控制非常困难。文中简要阐述了开展长江口外潮汐精细化模型研究的方法,介绍了利用潮汐精细化模型对长江口外航路任意点进行潮汐预报的方法,并通过实测数据进行了精度分析,提出了建议。     

Photometric Follow-up Transit (Primary Eclipse) Observations of WASP-43 b and TrES-3b and A Study on Their Transit Timing Variations

Two photometric follow-up transit (primary eclipse) observations on WASP-43 b and four observations on TrES-3 b are performed using the Xuyi Near-Earth Object Survey Telescope. After differential photometry and light curve analysis, the physical parameters of the two systems are obtained and are in good match with the literature. Combining with transit data from a lot of literature, the residuals (O ? C) of transit observations of both systems are fitted with the linear and quadratic functions. With the linear fitting, the periods and transit timing variations (TTVs) of the planets are obtained, and no obvious periodic TTV signal is found in both systems after an analysis. The maximum mass of a perturbing planet located at the 1:2 mean motion resonance (MMR) for WASP-43 b and TrES-3 b is estimated to be 1.826 and 1.504 Earth mass, respectively. By quadratic fitting, it is confirmed that WASP-43 b may have a long-term TTV which means an orbital decay. The decay rate is shown to be P? = (?0.005248 ± 0.001714) s·yr^?1, and compared with the previous results. Based on this, the lower limit of the stellar tidal quality parameter of WASP-43 is calculated to be ${Q^{\prime }}_{*}\ge 1.5\times {10}^5$, and the remaining lifetimes of the planets are presented for the different ${Q^{\prime }}_{*}$ values of the two systems, correspondingly.     

海洋微塑料物理迁移过程研究进展与展望

微塑料作为一种新型污染物, 在海洋中广泛分布, 给海洋生态系统带来潜在的生态风险。充分认识海洋微塑料迁移途径和归趋行为, 掌握其运移规律及影响因素, 能够为治理海洋微塑料污染提供理论指导和科学依据。本文综述了微塑料在海洋中物理迁移过程的研究进展, 系统分析了影响微塑料运移过程的各种影响因素, 包括风、浪、流等海洋动力过程, 生物作用和塑料的粒径、形状等物理性质; 并对该领域未来的研究工作进行了展望。     

Evolutionary dynamics of the Wnt gene family: implications for lophotrochozoans

Journal of Oceanology and Limnology - Genes encoding Wnt ligands, which have important roles in cell communication and organ development, are restricted to multicellular animals. We systematically...     

一种基于地球剖分网格的区域面积计算方法

区域面积计算是区域分析的基础。随着空间信息剖分组织理论的发展,地球剖分网格受到广泛关注,并且显示了在空间大数据组织能力上的潜力。球面空间与欧式空间不同胚导致地球剖分网格规格不一的特征,在进行区域面积计算时需要先将网格转换回对应的经纬度范围,再进行积分运算,流程复杂,计算效率不高。由此本文根据GeoSOT全球参考网格的剖分方案,基于矩阵变换的分块、邻接操作以及向量的乘法运算,设计了一种可以摆脱经纬度和积分运算的面积计算方法,并针对此方法设计实验验证了其可行性和高效性,为网格体系下区域面积计算提供一种新思路。     

A new method for platform design based on parametric technology

A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods.     

舟山渔场及邻近海域鱼类种类组成和数量分布

根据2006年8月、2007年1、5、11月在舟山渔场及邻近海域(29°30′—32°00′N,127°E以西)开展海洋生态系统综合调查所获得的游泳动物调查资料,用渔获率作为鱼类资源分布的数量指标,对舟山渔场及邻近海域的鱼类种类组成、数量分布、季节变化趋势作了定量分析。结果表明,舟山渔场及邻近海域鱼类种类约有139种,隶属14目、56科、105属,其中日本红娘鱼、绿鳍鱼、六丝矛尾虎鱼、细条天竺鱼、海鳗、黑、星康吉鳗、小黄鱼、前肛鳗、短吻舌鳎、棘头梅童鱼等25种鱼类占鱼类总渔获量的84.18%,是调查海域桁杆拖网的主要捕捞鱼类,而其它种类的渔获量较少。不同季节的经济鱼类渔获物组成相差较大,而优势种种类组成变化较少。渔获量高峰期主要出现在夏季,从不同区域的渔获率分布趋势来看,春、夏、秋季的鱼类渔获率都以江外渔场最高,其次是长江口渔场,舟山渔场居第三,而杭州湾河口区的鱼类渔获率明显偏低。冬季鱼类渔获率分布趋势与春夏秋季不同,以长江口渔场为最高,其次是舟山渔场,而江外渔场和杭州湾河口区渔获率明显偏低。与以往(20世纪60年代初)调查结果相比,舟山渔场及邻近海域鱼类种数组成、种群动态及群落结构都发生了很大的变化。     

Sr2CoO4-δ薄膜中的自旋玻璃态的磁性质研究

用脉冲激光沉积方法(PLD)在铝酸镧衬底上制备了c取向的高氧空位含量的锶钴氧薄膜.X射线衍射分析表明薄膜单一取向且没有明显杂相.原位的高气压反射式高能电子衍射仪(RHEED)监测显示,薄膜为层状生长.通过对薄膜磁化强度随温度、磁场及时间的变化曲线进行测量,发现零场冷曲线上可能存在两个特征温度:T_f和T_a.T_f为对应玻璃态的冻结温度而T_a对应少量的不缺     

极性分子型电流变液导电机理研究

极性分子型电流变液是一种新型的电流变材料.其介电颗粒上吸附极性分子,极性分子在颗粒间强局域电场作用下发生取向是产生巨电流变效应的关键.通过对Ca—Ti—O(CTO)体系极性分子型电流变液电流密度的测量发现,其导电行为遵从Poole-Frenkel效应的规律,这是极性分子型电流变液的重要特征之一.而500 ℃处理过的CTO粉体不含极性分子,所配制的电流变液无巨电流变效应,其电流密度随外电场强度近似地呈线性关系,显示出传统电流变液特性.