GPS monitoring of vertical ground motion in northern Ardenne–Eifel: five campaigns (1999–2003) of the HARD project

We present the HARD project of GPS monitoring of vertical ground motion in NE Ardenne and Eifel (western Europe). Its main purposes are to get a better insight into the present-day rates of vertical ground motion in intraplate settings and to identify the various causes of these motions. Since 1999, we have carried out yearly campaigns of simultaneous GPS measurements at 12 sites situated so as to sample the different tectonic subunits of the study area and especially to record potential displacements across the seismogenic Hockai fault zone. Five campaigns (1999–2003) have been processed currently. Key issues of the data processing with the Gamit software are discussed and first results are presented. Though temporally consistent in many cases, the obtained vertical motion rates are spatially highly variable. They are also much too high (several mm/year) to support a tectonic interpretation, and a long-term influence of groundwater level variations is proposed to account for the observed motions. This influence should be distinguished from seasonal variations and from inter-survey variations linked to the varying degree of soil and subsoil drying off during the successive spring surveys.     

Chemical weathering in the Upper Huang He (Yellow River) draining the eastern Qinghai-Tibet Plateau

We examined the fluvial geochemistry of the Huang He (Yellow River) in its headwaters to determine natural chemical weathering rates on the northeastern Qinghai-Tibet Plateau, where anthropogenic impact is considered small. Qualitative treatment of the major element composition demonstrates the dominance of carbonate and evaporite dissolution. Most samples are supersaturated with respect to calcite, dolomite, and atmospheric CO₂ with moderate (0.710-0.715) ⁸⁷Sr/⁸⁶Sr ratios, while six out of 21 total samples have especially high concentrations of Na, Ca, Mg, Cl, and SO₄ from weathering of evaporites. We used inversion model calculations to apportion the total dissolved cations to rain-, evaporite-, carbonate-, and silicate-origin. The samples are either carbonate- or evaporite-dominated, but the relative contributions of the four sources vary widely among samples. Net CO₂ consumption rates by silicate weathering (6-120 × 10³ mol/km²/yr) are low and have a relative uncertainty of ∼40%. We extended the inversion model calculation to literature data for rivers draining orogenic zones worldwide. The Ganges-Brahmaputra draining the Himalayan front has higher CO₂ consumption rates (110-570 × 10³ mol/km²/yr) and more radiogenic ⁸⁷Sr/⁸⁶Sr (0.715-1.24) than the Upper Huang He, but the rivers at higher latitudes are similar to or lower than the Upper Huang He in CO₂ uptake by silicate weathering. In these orogenic zones, silicate weathering rates are only weakly coupled with temperature and become independent of runoff above ∼800 mm/yr.     

Modeling the impact of microbial activity on redox dynamics in porous media

The present study investigates the interaction between microbial growth and activity and the redox dynamics in natural porous media. The impact the transport regime has on this interaction is also addressed. Expressions for microbial growth are incorporated into a geochemical reaction network linking redox reaction rates to the activity of the microorganisms. A flexible simulation environment, the Biogeochemical Reaction Network Simulator (BRNS) is used for this purpose. Two reactive transport applications relevant to fields of contaminant hydrology and early diagenesis are simulated with the BRNS. Model results are evaluated based on a comparison with comprehensive datasets on the biodegradation of lactate in a sand column experiment and on the distribution of redox-sensitive chemical species in marine sediments of the Skagerrak, Denmark. It is shown that, despite quite different transport regimes, the geomicrobiological model performs equally well in the reproduction of measured chemical species distribution for both applications. This result emphasizes the broad applicability of the proposed approach. Our simulations support that the competitive behavior between various microbial groups is a process controlling the development of redox stratified environments. Furthermore, it is also shown that the transport regime is a key controlling factor for the degree of spatial correlation between microbial biomass distributions and redox reaction rates. Although all our simulations yield a pronounced stratification of the redox processes in the system, the biomass distribution is related to the associated reaction rates only in case of the advection controlled column experiment. In the early diagenetic application, mixing due to bioturbation is the dominant transport process for particulate matter, hence leading to fairly homogeneous distribution of bacterial biomasses which are unrelated to the spatial distribution of redox reaction rates. This homogeneous biomass distribution combined with the 1G carbon degradation model approach might explain why the steady state concentration profiles in such systems can be reproduced by diagenetic models without explicit representation of microbial growth.     

A 2000‐year lipid biomarker record preserved in a stalagmite from north‐west Scotland

Previous studies on lipid biomarkers preserved in Chinese stalagmites have indicated that ratios of low‐molecular‐weight (LMW) to high‐molecular‐weight (HMW) n‐alkanes, n‐alkan‐2‐ones, n‐alkanols and n‐alkanoic acids can be used as an index of vegetation versus microbial organic matter input to the system and, by extension, a marker of climatic changes, with increases in the proportion of LMW compounds coinciding with colder periods. Here we test whether this hypothesis is equally applicable to a different geographical region (north‐west Scotland), by examining a stalagmite record of the past 200 years, and a wider range of lipid markers. We also test the applicability of other lipid proxies in this context, including the use of n‐alkane ratios, to interpret vegetation changes, and unsaturated alkanoic acid ratios as climatic indicators. The results show that lipid proxies preserved in stalagmites, and especially those related to vegetation, are potentially extremely useful in palaeoenvironmental research. Of particular value is the use of C₂₇/C₃₁ n‐alkane ratios as a proxy for vegetation change, clearly indicating variations between herbaceous and arboreal cover. This proxy has now been successfully applied to samples from diverse environments, and can be considered sufficiently robust to be of use in analysing future stalagmite records. It will be of particular value in areas where reliable pollen records are not available, as is often the case with deeper cave deposits. However, the division between LMW and HMW aliphatic compounds is not a clear‐cut case of microbial versus plant activity, with the changes in LMW compounds relating more closely to those in their HMW analogues than in specific bacterial biomarkers. The use of unsaturated alkanoic acid ratios here gives conflicting results, with the observed variation through time depending on the isomer measured. The discrepancies between the findings of this study and previous work are likely to be due to the varying controls on the lipids (original organic matter input, and compound degradation), which in turn will be affected by whether the main climatic limiting factor on the soil is temperature or precipitation. This suggests that lipid proxies preserved in stalagmites must be interpreted with care, particularly in the case of bacterial compounds which may be derived from within the cave or from the soil. However, many of these issues can be resolved by the use of multi‐proxy studies. Copyright © 2011 John Wiley & Sons, Ltd.     

A laboratory study of the turbulent ekman layer

Abstract

Comparing characteristics of a turbulent Ekman boundary layer in a rotating apparatus with atmospheric observations and theories, we find that the similarity relations derived by Kazanski and Monin, and others, scale both laboratory and field data quite well, especially considering that the Coriolis parameter is larger by a factor of 10⁵ in the experiment than it is in the atmosphere. Eddy viscosity models and Deardorff's numerical model predict the properties of both with varying degrees of success. High frequency spectra of velocity fluctuations scale with the Kolmogoroff length and time scales. Both magnitude and direction of the surface shear stress were measured directly, with a heated film stress gauge.     

Integrating Indoor and Outdoor Spaces for Pedestrian Navigation Guidance: A Review

In light of the many improvements within 3D urban modeling and Location‐Based Services, this article provides a timely review of the state‐of‐the‐art on integrating indoor and outdoor spaces in pedestrian navigation guidance aids. With people moving seamlessly between buildings and surrounding areas, navigation guidance tools should extend from merely outdoor or indoor guidance, to provide support in the combined indoor‐outdoor context. This article first examines the challenges and complexities of integrating indoor and outdoor spaces into a single navigation system. Next, by using objective selection criteria, 36 relevant studies were withheld and further reviewed on their specific developments in data model requirements, and algorithmic and context support for integrated IO navigation systems. This review shows that the challenges of dealing with both indoor and outdoor space structures, while taking into account pedestrian's freer use of space, currently complicate the proposition of a unified IO space concept for navigation. However, there are some ongoing developments (e.g. context definitions, algorithmic extensions, increased data availability, growing awareness of pedestrians’ perception during wayfinding) that will help to bring outdoor and indoor spaces closer together in the realm of combined geospatial analysis.     

Determination of lower and upper bounds of predicted production from history-matched models

We present a method to determine lower and upper bounds to the predicted production or any other economic objective from history-matched reservoir models. The method consists of two steps: 1) performing a traditional computer-assisted history match of a reservoir model with the objective to minimize the mismatch between predicted and observed production data through adjusting the grid block permeability values of the model. 2) performing two optimization exercises to minimize and maximize an economic objective over the remaining field life, for a fixed production strategy, by manipulating the same grid block permeabilities, however without significantly changing the mismatch obtained under step 1. This is accomplished through a hierarchical optimization procedure that limits the solution space of a secondary optimization problem to the (approximate) null space of the primary optimization problem. We applied this procedure to two different reservoir models. We performed a history match based on synthetic data, starting from a uniform prior and using a gradient-based minimization procedure. After history matching, minimization and maximization of the net present value (NPV), using a fixed control strategy, were executed as secondary optimization problems by changing the model parameters while staying close to the null space of the primary optimization problem. In other words, we optimized the secondary objective functions, while requiring that optimality of the primary objective (a good history match) was preserved. This method therefore provides a way to quantify the economic consequences of the well-known problem that history matching is a strongly ill-posed problem. We also investigated how this method can be used as a means to assess the cost-effectiveness of acquiring different data types to reduce the uncertainty in the expected NPV.     

Why GPS makes distances bigger than they are

Global navigation satellite systems such as the Global Positioning System (GPS) is one of the most important sensors for movement analysis. GPS is widely used to record the trajectories of vehicles, animals and human beings. However, all GPS movement data are affected by both measurement and interpolation errors. In this article we show that measurement error causes a systematic bias in distances recorded with a GPS; the distance between two points recorded with a GPS is – on average – bigger than the true distance between these points. This systematic ‘overestimation of distance’ becomes relevant if the influence of interpolation error can be neglected, which in practice is the case for movement sampled at high frequencies. We provide a mathematical explanation of this phenomenon and illustrate that it functionally depends on the autocorrelation of GPS measurement error (C). We argue that C can be interpreted as a quality measure for movement data recorded with a GPS. If there is a strong autocorrelation between any two consecutive position estimates, they have very similar error. This error cancels out when average speed, distance or direction is calculated along the trajectory. Based on our theoretical findings we introduce a novel approach to determine C in real-world GPS movement data sampled at high frequencies. We apply our approach to pedestrian trajectories and car trajectories. We found that the measurement error in the data was strongly spatially and temporally autocorrelated and give a quality estimate of the data. Most importantly, our findings are not limited to GPS alone. The systematic bias and its implications are bound to occur in any movement data collected with absolute positioning if interpolation error can be neglected.