The distribution of carbon monoxide in the lower atmosphere of Venus

We have obtained spatially resolved near-infrared spectroscopy of the Venus nightside on 15 nights over three observing seasons. We use the depth of the CO absorption band at 2.3 μm to map the two-dimensional distribution of CO across both hemispheres. Radiative transfer models are used to relate the measured CO band depth to the volume mixing ratio of CO. The results confirm previous investigations in showing a general trend of increased CO abundances at around 60° latitude north and south as compared with the equatorial regions. Observations taken over a few nights generally show very similar CO distributions, but significant changes are apparent over longer periods. In past studies it has been assumed that the CO latitudinal variation occurs near 35 km altitude, at which K-band sensitivity to CO is greatest. By modeling the detailed spectrum of the excess CO at high latitudes we show that it occurs at altitudes around 45 km, much higher than has previously been assumed, and that there cannot be significant contribution from levels of 36 km or lower. We suggest that this is most likely due to downwelling of CO-rich gas from the upper atmosphere at these latitudes, with the CO being removed by around 40 km through chemical processes such as the reaction with SO₃.     

Extending the Capture Map Concept to Estimate Discrete and Risk-Based Streamflow Depletion Potential

A popular and contemporary use of numerical groundwater models is to estimate the discrete relation between groundwater extraction and surface-water/groundwater exchange. Previously, the concept of a “capture map” has been put forward as a means to effectively summarize this relation for decision-making consumption. While capture maps have enjoyed success in the environmental simulation industry, they are deterministic, ignoring uncertainty in the underlying model. Furthermore, capture maps are not typically calculated in a manner that facilitates analysis of varying combinations of extraction locations and/or reaches. That is, they are typically constructed with focus on a single reach or group of reaches. The former of these limitations is important for conveying risk to decision makers and stakeholders, while the latter is important for decision-making support related to surface-water management, where future foci may include reaches that were not the focus of the original capture analysis. Herein, we use the concept of a response matrix to generalize the theory of the capture-map approach to estimate spatially discrete streamflow depletion potential. We also use first-order, second-moment uncertainty estimation techniques with the concept of “risk shifting” to place capture maps and streamflow depletion potential in a stochastic, risk-based framework. Our approach is demonstrated for an integrated groundwater/surface-water model of the lower San Antonio River, Texas, USA.     

Growing season evapotranspiration in boreal fens in the Athabasca Oil Sands Region: Variability and environmental controls

Current efforts to assess changes to the wetland hydrology caused by growing anthropogenic pressures in the Athabasca Oil Sands Region (AOSR) require well-founded spatial and temporal estimates of actual evapotranspiration (ET), which is the dominant component of the water budget in this region. This study assessed growing season (May–September) and peak growing season (July) ET variability at a treed moderate-rich fen and treed poor fen (in 2013–2018), open poor fen (in 2011–2014), and saline fen (in 2015–2018) using eddy covariance technique and a set of complementary environmental data. Seasonal fluctuations in ET were positively related to net radiation, air temperature and vapour pressure deficit and followed trends typical for the Boreal Plains (BP) and AOSR with highest rates in June–July. However, no strong effect of water table position on ET was found. Strong surface control on ET is evident from lower ET values than potential evapotranspiration (PET); the lowest ET/PET was observed at saline fen, followed by open fen, moderately treed fen, and heavily treed fen, suggesting a strong influence of vegetation on water loss. In most years PET exceeded precipitation (P), and positive relations between P/PET and ET were observed with the highest July ET rates occurring under P/PET ~1. However, during months with P/PET > 1, increased P/PET was associated with decreased July ET. With respect to 30-year mean values of air temperature and P in the area, both dry and wet, cool and warm growing seasons (GS) were observed. No clear trends between ET values and GS wetness/coldness were found, but all wet GS were characterized by peak growing seasons with high daily ET variability.     

Constraining basin thermal history and petroleum generation using palaeoclimate data in the Piceance Basin,Colorado

Careful assessment of basin thermal history is critical to modelling petroleum generation in sedimentary basins. In this paper, we propose a novel approach to constraining basin thermal history using palaeoclimate temperature reconstructions and study its impact on estimating source rock maturation and hydrocarbon generation in a terrestrial sedimentary basin. We compile mean annual temperature (MAT) estimates from macroflora assemblage data to capture past surface temperature variation for the Piceance Basin, a high‐elevation, intermontane, sedimentary basin in Colorado, USA. We use macroflora assemblage data to constrain the temporal evolution of the upper thermal boundary condition and to capture the temperature change with basin uplift. We compare these results with the case where the upper thermal boundary condition is based solely upon a simplified latitudinal temperature estimate with no elevation effect. For illustrative purposes, 2 one‐dimensional (1‐D) basin models are constructed using these two different upper thermal boundary condition scenarios and additional geological and geochemical input data in order to investigate the impact of the upper thermal boundary condition on petroleum source rock maturation and kerogen transformation processes. The basin model predictions indicate that the source rock maturation is very sensitive to the upper thermal boundary condition for terrestrial basins with variable elevation histories. The models show substantial differences in source rock maturation histories and kerogen transformation ratio over geologic time. Vitrinite reflectance decreases by 0.21%Ro, source rock transformation ratio decreases 10.5% and hydrocarbon mass generation decreases by 16% using the macroflora assemblage data. In addition, we find that by using the macroflora assemblage data, the modelled depth profiles of vitrinite reflectance better matches present‐day measurements. These differences demonstrate the importance of constraining thermal boundary conditions, which can be addressed by palaeotemperature reconstructions from palaeoclimate and palaeo‐elevation data for many terrestrial basins. Although the palaeotemperature reconstruction compiled for this study is region specific, the approach presented here is generally applicable for other terrestrial basin settings, particularly basins which have undergone substantial subaerial elevation change over time.     

The scattering mean free path in the Uranian atmosphere

New measurements of the equivalent widths of the 4-0 S(0) and S(1) H₂ quadrupole lines in the Uranian spectrum have been obtained using high dispersion (4.12 Å/mm) image-tube spectrography. The measured equivalent widths are $\text{62 ± 19}\text{m}\text{A}\text{?}\text{and}\text{58 ± 13}\text{m}\text{A}\text{?}$ for the S(0) and S(1) lines, respectively. Curve-of-growth analysis in terms of a reflecting layer model yields an H₂ column-density of 780_?330⁺⁹⁴⁰km amagat and a temperature of 78_?24⁺⁸⁰°K. Interpretation using a semi-infinite, homogeneous, isotropically scattering model for line formation yields a scattering mean free path at λ6400 Å of 550 ± 250 km amagat. Quoted errors for both the H₂ column-density and the scattering mean free path include the effect of uncertainty in the choice of atmospheric temperature. The results are discussed in terms of current models for the Uranian atmosphere.     

Enhanced geochemical gradients in a marine shallow-water hydrothermal system: Unusual arsenic speciation in horizontal and vertical pore water profiles

The shallow marine hydrothermal vents near Ambitle Island in eastern Papua New Guinea discharge hot, slightly acidic, As-rich, chemically reduced fluid into cool, slightly alkaline, oxygenated seawater. Gradients in temperature, pH, and total As (As^T), among others, are established as the two aqueous phases mix. The hydrothermal fluid contained 900 μg/L As^T, almost exclusively present as the reduced As^III, while local seawater measured between 1.2 and 2.4 μg/L As, with approximately equal levels of As^III and As^V. Of particular interest in this study was As speciation and abundance in pore waters as a function of sediment depth and as a function of distance from the area of focused venting. With increasing distance, As^T concentration in the pore water decreased rapidly, but remained elevated up to 300 m from the area of focused venting when compared to a non-hydrothermal control site. As a function of depth (to 100 cm) As^T concentration in the pore water profiles was elevated and generally increased with depth. Surprisingly, aqueous As^V far exceeded aqueous As^III at almost all distances and depths investigated, while at the control site the As^III concentration exceeded that of As^V. In the Tutum Bay hydrothermal system, chemical disequilibria among As species provide potential metabolic energy for arsenite oxidizing microorganisms where hydrothermal fluid mixes with seawater near the vent orifice, and for arsenate reducing microorganisms with increasing distance and depth from the hydrothermal point source.     

A GPS-Supported Gravity Survey in the Amazon of Ecuador

The growing importance and effectiveness of the Global Positioning System (GPS) in positioning geophysical surveys is now well established. In Ecuador's Amazon basin the use of GPS was the determining factor in the successful completion of a gravity survey carried out in 1994. Over 500 gravity stations, spaced from 1 to 5 km apart and positioned by GPS, were collected in the jungle environment in the country's southeast, where the preexisting data, of variable and unknown quality, were mostly confined to areas along the major rivers. This station densification, which includes the reoccupation of selected points, contributed to increase the gravity coverage; it also allowed us to evaluate and correct 1100 preexisting data points in the area, so that the different surveys can be merged. The composite data set is used for a geologic analysis of the study area, where previously unknown structures are discovered. ? 1999 John Wiley & Sons, Inc.     

Predicting New Hampshire indoor radon concentrations from geologic information and other covariates

 Generalized geologic province information and data on house construction were used to predict indoor radon concentrations in New Hampshire (NH). A mixed-effects regression model was used to predict the geometric mean (GM) short-term radon concentrations in 259 NH towns. Bayesian methods were used to avoid over-fitting and to minimize the effects of small sample variation within towns. Data from a random survey of short-term radon measurements, individual residence building characteristics, along with geologic unit information, and average surface radium concentration by town, were variables used in the model. Predicted town GM short-term indoor radon concentrations for detached houses with usable basements range from 34 Bq/m³ (1 pCi/l) to 558 Bq/m³ (15 pCi/l), with uncertainties of about 30%. A geologic province consisting of glacial deposits and marine sediments was associated with significantly elevated radon levels, after adjustment for radium concentration and building type. Validation and interpretation of results are discussed. Received: 20 October 1997 · Accepted: 18 May 1998     

Growth and mortality of juvenile winter flounder in two New England estuaries

A length-based model for calculating growth and mortality of juvenile winter flounder (Pseudopleuronectes americanus) populations has been developed. This model is based on work by Sullivan et al. (1990) and incorporates the von Bertalanffy growth equation, including stochasticity in growth, and a mortality rate that decreases exponentially with size. The length-based model was fit to observed size-frequency distributions, and model likelihood profiles were generated to produce 95% confidence intervals about parameter estimates. We analyzed size-frequency distributions of 3 to 15 cm juvenile winter flounder, collected with a 1-m beam trawl, at monthly intervals from June to October during 1993 and 1994. Growth rates were higher at a contaminated site, New Haven Harbor, than at a clean site, the Connecticut River estuary, however, the parameter estimates had overlapping 95% confidence intervals. Mortality rates were similar at the two sites.     

A Generic Closed-Loop Contaminant Treatment System Package for MODFLOW 6

We present a contaminant treatment system (CTS) package for MODFLOW 6 that facilitates the simulation of pump-and-treat systems for groundwater remediation. Using the “nonintrusive” MODFLOW 6 application programming interface (API) capability, the CTS package can balance flows between extraction and injection wells within the outer flow solution loop and applies blended concentration/mass treatment efficiency within the outer transport solution loop. The former can be important when the requested extraction rate cannot be satisfied by the current simulated groundwater system conditions, while the latter can be important for simulating incomplete/imperfect treatment schemes. Furthermore, the CTS package allows users to temporally vary all aspects of a simulated CTS system, including the configuration and location of injection and extraction wells, and the CTS efficiency. This flexibility combined with the API-based implementation provide a generic and general CTS package that can be applied across the wide range of MODFLOW 6 simulation options and that evolves in step with MODFLOW 6 code modifications and advancements without needing to update the CTS package itself.