Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

Sources and sinks of sea salt in a newfoundland blanket bog

Over an oceanic peatland, the concentration of Na in fog averaged 38.1 mgl^?1 compared with 1.8 mgl^?1 in rain, resulting in a significant flux of mineral elements to the surface. Between 16 May and 20 June 1990 the average mass flux of Na to the bog surface by fog, rain, and dry deposition was 21.9, 10.4 and 7.0 mg m^?2 d^?1. There was little long-term storage of Na within the peatland system, where Na losses measured in stream runoff averaged 34.8 mg m² d^?1, and deep groundwater losses 4 mg m^?2 d^?1. Calcium and Mg were preferentially retained in the organic soil, whereas K was relatively mobile. Potassium tended to become concentrated in the unsaturated zone. Stream runoff had a consistently higher pH than groundwater, corresponding to higher Ca and Mg concentrations, which may have been from mineral sources in the headwater ponds. Otherwise, the stream water chemistry was closely related to groundwater in the upper layers of the peat deposit.     

Cambridge deep Ocean geophone

We describe recent mechanical andeelectronic modifications to the Cambridge Ocean Bottom Hydrophone system, enabling it to record in addition three geophone channels from a deployed, disposable geophone package. Examples of data from seismic refraction experiments show good correspondence between records of ground motion detected by the hydrophone and the vertical geophone. Seismic signals are undistorted by noise from instrument related sources. Clear examples of P to S conversions just below the receiver are observed. Improved recording conditions are achieved by deploying the geophones in a small pressure vessel as far away as possible from the main instrument package.     

Dislocations in CaTiO3 perovskite deformed at high-temperature: a transmission electron microscopy study

Dislocation configurations in natural single crystals of CaTiO₃ perovskite deformed in high-temperature creep were examined and characterized by transmission electron microscopy. Screw dislocations with Burgers vector [100]_pc and [011]_pc, dissociated on the $(01\bar 1)_{{\text{pc}}} $ plane, form rectangular networks with extended four-fold nodes in the shape of octagons, a configuration never observed in any of the previously investigated perovskites, except CaGeO₃. Screw dislocations with Burgers vector [101]_pc and $(\bar 101)_{{\text{pc}}} $ , on the (010)_pc plane, react to form a twist wall; the dislocations with Burgers vector [002] produced by the reaction decompose into two perfect dislocations [001]_pc. This results in a new configuration, never observed before, with three-fold nodes at the corners of rectangles. Both the octagonal extended nodes and the junctions decomposed into perfect dislocations are seen in samples deformed indifferently by slip on {100}_pc or {110}_pc planes, but they seem to appear only above 1520 K, in the cubic phase.     

Uranus: Disk structure within the 7300-Å methane band

Orthogonal narrow-band (100 Å) photoelectric slit scan photometry of Uranus has been used to infer the basic two-dimensional structure of the disk within the 7300-Å methane band. Numerical image reconstruction and restoration techniques have been applied to quantitatively estimate the degrees of polar and limb brightening on the planet. Through partial removal of atmospheric smearing, an effective spatial resolution of approximately 0.9 arcsec has been achieved. Peak polar, limb, and central intensities on the disk are in the respective proportions 3:2:1. In addition, the bright polar feature is displaced from the geometric pole towards the equator of the planet.     

The energetics of interaction between oxygen vacancies in sillimanite: A model for the mullite structure

A microscopic model is introduced to discuss the modulated structure of mullite. The oxygen vacancies of this aluminosilicate are known to play a central role. In particular, a single vacancy strongly orders its surrounding Al/Si tetrahedral sites. It is shown in this work that if two oxygen vacancies approach too closely to one another, their Al/Si dressing overlap. This situation results in repulsive interaction. The field of interaction between the vacancies is estimated with the use of an atomistic computer simulation. We use a Bragg-Williams type of theory to dicuss the ordering pattern of the vacancies. Due to frustration between the two dominant repulsive interactions, our model predicts a modulated phase transition in agreement with observation.     

The impact of natural hazards on the health sector in the Caribbean: Implications for health sector planning

In the last decade significant initiatives have been taken in the health sector with the view to better manage and respond to natural disaster emergencies. However, the recent hurricane disasters related to Hugo and Gilbert have highlighted many areas of health sector emergency planning still to be adressed. This paper briefly summarises the impact of recent natural disaster on the health sector in the Caribbean and comments on the performance of the sector during the emergencies. An effort is then made to detail what are the policy and programming issues to be tackled, if desired improvements are to be achieved.The reader may like to see GeoJournal vol. 23, no. 4 (April 1991) on Caribbean Hurricanes     

TREK: A cosmic-ray experiment on the Russian space station MIR

The goals of the TREK experiment, now in place on the MIR Space Station, are to resolve and measure the composition of both odd-Z and even-Z cosmic-ray nuclei up to uranium, to measure the isotopic composition of Fe-group nuclei, and to search for transuranic nucleic and exotic particles such as strangelets. To collect tracks of ultraheavy cosmic rays, exterior panels holding an array of BP-1 phosphate glass 1.2m² in area and 16 plates thick are now mounted outside the Kvant-2 module on MIR. Heaters and relays regulate the temperature of the glass at 25°±5°C. The detectors will record 10³ cosmic-ray tracks withZ50 during 2.5 years. An interior panel consisting of an array 0.09 m² in area and 32 plates thick and mounted on the inside wall of the Soyuz spacecraft (attached to the Space Station) will collect tracks of about 13000 Fe and 500 Ni nuclei.     

Molecular simulations of metal adsorption to bacterial surfaces

The atomic-scale interactions that occur between cations and the metal-binding cell wall components common to many gram-positive bacteria were investigated using molecular simulations techniques. We examined the adsorption of Cd and Pb onto peptidoglycan and teichoic acid components of the bacterial cell wall using classical energy force field methods. Within the framework of molecular mechanics and the Cerius² modeling software, we used energy minimization, conformational analysis, and molecular dynamics to examine the different components of the cell wall and to determine relative binding energies and structural configurations of the cell wall components, both with and without the metals present. Electronic structure calculations of representative metal-organic complexes validate the more practical classical methods required in simulating the large number of atoms associated with the cell wall components. The classical force field simulations were conducted in both gas phase and solvated periodic cells. Force field-based simulation techniques can adequately describe the interactions of Cd with the cell wall, defining both metal ion coordinations and binding distances. However, the classical force field approach is inconsistent in describing the observed Pb-cell wall interactions due to possible limitations in the force field parameters, the propensity for Pb to form hydroxides at circumneutral pH, or the dominance of other adsorption mechanisms.