Retracking of Jason-1 Data

We present the results of retracking 18 cycles (15 from the Jason-TOPEX collinear period) of Jason-1 data. We used the retracking method of Rodriguez which simultaneously solves for all relevant waveform parameters using a 26 Gaussian model of the altimeter point target response. We find significant differences from the Jason-1 Project retracking in the key parameters of range and significant wave height (SWH) in the second version of the Project SGDRs. The differences from the Jason-1 data have a strong dependence on off-nadir angle and some dependence on SWH. The dependence of range on SWH is what is called sea state bias. The retracking technique also estimates surface skewness. For Jason-1 with its very clean waveforms we make the first direct estimates of the skewness effect on altimeter data. We believe that the differences found here and thus in overall sea surface height are the result of the standard project processing using a single Gaussian approximation to the Point Target Response (PTR) and not solving simultaneously for off nadir angle. We believe that the relatively large sea state bias errors estimated empirically for Jason-1 during the cal/val phase result from sensitivity of quantities, particularly SWH, in project GDRs to off nadir angle. The TOPEX-Jason-1 bias can be determined only when a full retracking of Jason-1 is done for the collinear period.     

Analysis of the Tsunami of December 26, 2004, on the Kerala Coast of India—Part I: Amplitudes

The Indian Ocean tsunami of December 26, 2004, not only affected the Bay of Bengal coast of India but also part of the Arabian Sea coast of India. In particular, the tsunami caused loss of life and heavy damage on some parts of the Kerala coast in southwest India. The tsunami traveled west, south of Sri Lanka, and some of the tsunami energy was diffracted around Sri Lanka and the southern tip of India and moved northward into the Arabian Sea. However, tsunami, being a long gravity wave with a wave length of a few hundred kilometers, has to take a wide turn. In that process, it missed the very southern part of the Kerala coast and did not achieve large amplitudes there. However, further north, the tsunami achieved amplitudes of upto 5 m and caused loss of life and significant damage. Here we identify the physical oceanographic processes that were responsible for selective amplification of the tsunami in certain locations.     

Book review

Proceedings of the Symposium on Tide Recording, edited by R. Britton. (The Hydrographic Society Special Publication No. 4, The Hydrographic Society at North East London Polytechnic, Dept. of Land Surveying, London, U.K.) 203 pp., paper cover.     

Contribution of Tides to Sea Level Variations Along Visakhapatnam,India

The sea level variations along Visakhapatnam coast are governed by astronomical tides and nontidal oscillations including atmospheric pressure, winds, coastal currents, Ekman Pumping, and river influx. Tidal and nontidal sea level oscillations are usually studied separately because of the vastly different ways in which they are forced. In this study the tidal oscillations along Visakhapatnam are analyzed using GOTIC2 tidal model. The correlation between monthly mean sea level and monthly mean tides is 47% (r = 0.68) and increases to 54% (r = 0.74) when applied for inverse-barometric effect. The major six partial tides are computed and presented. The tidal variations from Neap tide to Spring tide are studied.     

A Dynamical Statistical Model for Prediction of a Tropical Cyclone

A dynamical statistical method is applied for operational forecasting of the Bay of Bengal tropical cyclone “Nargis” of April–May 2008. The method consists of three forecast components, namely (a) analysis of Genesis Potential Parameter (GPP) and maximum potential intensity, (b) track prediction, and (c) 12 hourly intensity prediction for forecasts up to 72 hours. The results of the study showed that GPP could provide necessary predictive signal at early stages of development on the further intensification of the low pressure system into a tropical cyclone. The landfall forecast position errors by different operational numerical models (NWP) showed landfall position errors ranging from 10 km to 150 km and landfall time error ranges from 6 hours early to 6 hours delay. The dynamical statistical model is capable to provide 12 hourly nearly realistic intensity forecasts up to 60 hours of forecast.     

A Simple Method to Minimize Orientation Effects in a Profiling Radiometer

Marine optical parameters required for ocean color satellite applications must be measured with high accuracy and errors within the permissible limits. These stringent requirements demand careful measurements of optical parameters. Though the free-fall radiometer is found to be a better option for measuring underwater light parameters as it avoids the effects of ship shadow and is easy to operate, the measurements demand profiling the radiometer vertical in water with minimum tilt. Here we present the results of our observations on the tilts of the radiometer from the measurements in the Arabian Sea. Since there is hardly any study carried-out on the tilt of the profiling radiometer, the result of this study will help in the better design of such marine instruments. The tilt of the radiometer near the surface of the water is attributed to the mode of deployment and environment parameters, while the tilt at depth of the water is influenced by the density variations of the water. Here we also demonstrate a method of deploying the instrument that minimizes the tilt of the instrument at the surface layer of the water.     

Hydrothermal Metalliferous Sediments and Waters Off the Lesser Antilles

Abstract

Considerable metal enrichments have been found in hydrothermal fluids and metalliferous sediments off the central Lesser Antilles Volcanic Arc. The elements variably enriched in the fluids as a result of the hydrothermal activity are Fe, Mn, As, Si, B, Li and in the sediments, Fe, P, Mo, As, Sb, Hg, Cu and Pb. Variations in the concentrations of these elements in both fluids and sediments along the arc result from a number of factors, the most important of which is the stage that each island's volcano has reached in its eruptive cycle. Although hydrothermal mineralization on the sea floor off the islands is only low grade, phase separation in the hydrothermal fluids at depth could be leading to higher grade stockwork mineralization below the vent fields or the discharge of metal rich brines on the lower flanks of the volcanic islands.     

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.     

Time-Dependent Deformation Behavior of Jiangsu Marine Clay

In this article, the mechanical behavior of a Jiangsu marine clay was investigated by drained triaxial tests, traixial rheological tests, and one-dimensional compression and swelling tests. A visco-plastic model, the Bingham model combining two yield surfaces model, was proposed to describe the time-dependent deformation behaviors of the marine clay. The governing equation of Biot's consolidation theory for the visco-plastic soil is solved using a finite element code which incorporates the visco-plastic model. Using the finite element method, settlements of a typical embankment on the Lianxu expressway in China are calculated. Settlement calculations using the visco-plastic model are in agreement with the measured settlements in the field. The results demonstrate that the visco-plastic model is appropriate for calculating the visco-plastic deformations of Jiangsu marine clay. Theoretical and experimental studies show that the visco-plastic deformation of Jiangsu marine clay is substantial.     

Evaluation of Bearing Capacity for Multi-Layered Clay Deposits with Geosynthetic Reinforcement using Discrete Element Method

A stability analysis of reinforced foundation soil is presented in this paper. A method based on the discrete element method (DEM) is suggested for calculating the bearing capacity on strip footings over multilayer soils reinforced with a horizontal layer of geosynthetics. The proposed method can estimate the ultimate bearing capacity and the distribution of tensile force developed in the geosynthetics of the footing system by Winkler springs to account for the compatibility between soil blocks and tensile elements to consider the tensile behavior between soil and geosynthetics. For footings on various multilayer soils with or without reinforcement of geosynthetics, the results of the method were compared to the field test results as well as to those obtained by various methods proposed by other researchers.