Chromium speciation and mobility in a high level nuclear waste vadose zone plume

Radioactive core samples containing elevated concentrations of Cr from a high level nuclear waste plume in the Hanford vadose zone were studied to asses the future mobility of Cr. Cr(VI) is an important subsurface contaminant at the Hanford Site. The plume originated in 1969 by leakage of self-boiling supernate from a tank containing REDOX process waste. The supernate contained high concentrations of alkali (NaOH ≈ 5.25 mol/L), salt (NaNO₃/NaNO₂ >10 mol/L), aluminate [Al(OH)₄⁻ = 3.36 mol/L], Cr(VI) (0.413 mol/L), and ¹³⁷Cs⁺ (6.51 × 10⁻⁵ mol/L). Water and acid extraction of the oxidized subsurface sediments indicated that a significant portion of the total Cr was associated with the solid phase. Mineralogic analyses, Cr valence speciation measurements by X-ray adsorption near edge structure (XANES) spectroscopy, and small column leaching studies were performed to identify the chemical retardation mechanism and leachability of Cr. While X-ray diffraction detected little mineralogic change to the sediments from waste reaction, scanning electron microscopy (SEM) showed that mineral particles within 5 m of the point of tank failure were coated with secondary, sodium aluminosilicate precipitates. The density of these precipitates decreased with distance from the source (e.g., beyond 10 m). The XANES and column studies demonstrated the reduction of 29-75% of the total Cr to insoluble Cr(III), and the apparent precipitation of up to 43% of the Cr(VI) as an unidentified, non-leachable phase. Both Cr(VI) reduction and Cr(VI) precipitation were greater in sediments closer to the leak source where significant mineral alteration was noted by SEM. These and other observations imply that basic mineral hydrolysis driven by large concentrations of OH⁻ in the waste stream liberated Fe(II) from the otherwise oxidizing sediments that served as a reductant for CrO₄²⁻. The coarse-textured Hanford sediments contain silt-sized mineral phases (biotite, clinochlore, magnetite, and ilmenite) that are sources of Fe(II). Other dissolution products (e.g., Ba²⁺) or Al(OH)₄⁻ present in the waste stream may have induced Cr(VI) precipitation as pH moderated through mineral reaction. The results demonstrate that a minimum of 42% of the total Cr inventory in all of the samples was immobilized as Cr(III) and Cr(VI) precipitates that are unlikely to dissolve and migrate to groundwater under the low recharge conditions of the Hanford vadose zone.     

Ultracataclasis, sintering, and frictional melting in pseudotachylytes from East Greenland

Large volumes of pseudotachylyte (an intrusive, fault-related rock interpreted to form by a combination of cataclasis and melting) occur in Tertiary normal faults and accommodation zones along 400 km of the East Greenland volcanic rifted margin. Analysis of representative pseudotachylyte samples reveals a wide range of mesoscopic and microscopic textures, mineralogies, and chemistries in the aphanitic pseudotachylyte matrix. Three distinct types of pseudotachylyte (referred to as angular, rounded and glassy) are identified based on these characteristics. Angular pseudotachylyte (found primarily in dike-like reservoir zones) is characterized by angular grains visible on all scales, with micron-scale fragments of mica and amphibole. Its matrix is enriched in Fe₂O₃, MgO, and TiO₂ relative to the host rock, with minor increases in CaO, K₂O, and small decreases in Na₂O. Rounded pseudotachylyte is found in reservoir zones, injection veins (pseudotachylyte-filled extension fractures), and fault veins (small faults with pseudotachylyte along their surfaces). It is characterized by smooth-surfaced, compacted grains on microscopic scales, and encloses rounded, interpenetrative lithic clasts on outcrop scale. Its matrix is enriched in Fe₂O₃, MgO, TiO₂, and Al₂O₃ relative to the host rock, with minor depletion in Na₂O and K₂O. Glassy pseudotachylyte is found primarily along fault surfaces. Its matrix is characterized by isotropic, conchoidally fractured material containing microscopic, strain-free amphibole phenocrysts, and is enriched in TiO₂, Al₂O₃, K₂O, Fe₂O₃, MgO, CaO, and Na₂O relative to the host rock. These observations suggest that angular pseudotachylyte was produced by cataclasis, with enrichment in metallic oxides resulting from preferential crushing of mechanically weak amphibole and mica minerals found in the gneissic host rock. Cataclasis and concomitant frictional heating resulted in the textural and chemical modification of angular pseudotachylyte by sintering or melting, producing rounded and glassy pseudotachylyte, respectively. Compositional and textural observations constrain the temperatures reached during frictional heating (700–900°C) which in turn delimit the amount of frictional heat imparted to the pseudotachylytes during slip. Our results suggest that the East Greenland pseudotachylytes formed during small seismic events along faults at shallow crustal levels. Consistent relative ages and widespread occurrence of pseudotachylyte-bearing faults in East Greenland suggest that widespread microseismicity accompanied the early development of this volcanic rifted margin.     

The Luna 20 lithic fragments,and the composition and origin of the lunar highlands

Luna 20 soil 22003,1 (250–500 μ) is similar to Apollo 16 soil 61501,47 (250–500 μ) in terms of the percentage of different types of particles. However, among the lithic fragments, the Apollo 16 sample contains a greater percentage of fragments with more than 70 wt. % modal plagioclase and a significantly greater proportion of KREEP-rich particles. Modal analyses of non-mare lithic fragments in Luna 20 and Apollo 11, 14, 15 and 16 indicate that the KREEP-poor highland regions (the bulk of the lunar terrae), though relatively feldspathic, are compositionally inhomogeneous, ranging in plagioclase content from approximately 35 to 100 wt. %. The average plagioclase content lies in the range 45–70 wt.%. Luna 20 pyroxene analyses cluster in two groups, one more magnesian than the other. The groups persist when pyroxene analyses from KREEP-poor noritic, troctolitic and anorthositic lithic fragments from Apollo 11, 14, 15 and 16 and Luna 20 are included. Olivine compositions mimic these pyroxene groups.Within each pyroxene group Cr₂O₃ and TiO₂ decrease as $\text{Fe}\text{(Fe + Mg)}$ increases, suggesting a relationship by fractional crystallization. The two groups suggest that at least two magma compositions were involved. To account for these observations we envisage a Moon-wide magma system in which initial accretionary heterogeneities were imperfectly erased by diffusion and convection. During the cooling of this magma system fractional crystallization was effected by the flotation of plagioclase and sinking of pyroxene, olivine and perhaps ilmenite. The endproduct was an upper layer enriched in plagioclase and a lower layer enriched in mafic silicates. KREEP-rich rocks, which are predominantly noritic in major element composition, may be mechanical mixtures of KREEP-poor norite and material residual after fractional crystallization of the surface magma system.     

The formation of clear taenite in ordinary chondrites

The metallic phases in six bronzite and six hypersthene chondrites were studied metallographically and by electron microprobe. All of the chondrites studied contain zoned taenite. In bronzite chondrites, only about 5 per cent of the zoned taenite abuts on kamacite (the rest being apparently isolated from it) whereas in hypersthene chondrites an average of over 20 per cent abuts on kamacite. The compositions of the centers of zoned taenite can be used to obtain cooling rates by Wood's method. Including Wood's results, 14 out of 18 ordinary chondrites have cooling rates between 1 and 10°C/m.y.     

Environmental controls on blowing dust direction at lubbock,Texas, U.S.A.

Blowing dust is a common phenomenon at Lubbock, Texas, on the Southern High Plains. The directional variability of blowing dust estimated with the ‘sand rose’ technique, using wind speed and direction data, suggest that dust transport occurs from all directions. An empirical method of determining directional variability using meteorological data on visibility reductions due to blowing dust, however, indicates that most dust comes from the west and south-west. In addition to wind speed and direction, other environmental factors must be considered in explaining the spatial pattern of dust transport. Soil erodibility is variable in the region, with the most extensive area of highly erodible soils to the west and south-west of Lubbock. Rangeland dominates land use to the east, while agriculture is extensive to the north, west and south. Local farming techniques leave bare soil during the winter and spring, when most airborne dust is produced and also when strong winds are common from the west and south-west. Soil moisture is lowest to the southwest of Lubbock, which leads to a decrease in soil structure and an increase in the potential for wind erosion in that direction. Relative humidities affect threshold wind speeds and are lowest during March and April, when winds are common from the west and south-west. The spatial and seasonal variability and interactions between many factors, both natural and human-controlled, must therefore considered in explaining the directional variability of aeolian sediment transport at Lubbock.     

The medieval warm period on the southern Colorado Plateau

Several questions concerning the Medieval Warm Period (MWP), an interval (A.D. 900 to 1300) of elevated temperatures first identified in northern Europe, are addressed with paleoenvironmental and archaeological data from the southern Colorado Plateau in the southwestern United States. Low and high frequency variations in alluvial groundwater levels, floodplain aggradation and degradation, effective moisture, dendroclimate, and human adaptive behavior fail to exhibit consistent patterns that can be attributed to either global or regional expressions of the MWP. There is some suggestion, however, that climatic factors related to the MWP may have modified the regional patterns to produce minor anomalies in variables such as the number of intense droughts, the occurrence of specific droughts in the twelfth and thirteenth centuries, the prevalence of low temporal variability in dendroclimate, and the coherence of some low and high frequency environmental variables and aspects of human adaptive behavior. These results suggest that the MWP does not represent warming throughout the world. Rather, it was a complex phenomenon that probably was expressed differently in different regions.     

Monitoring midlake water temperature in southern Lake Michigan for climate change studies

Recent studies of potential climatic change on Great Lakes fisheries (e.g. Meisner , 1987; Magnuson , 1990; Regieret al., 1990) and our general ignorance of the natural variability of the basic physical properties of the Great Lakes (McCormick, 1990) have demonstrated the need for a long-term observation program which is representative of the lake-wide environment. In April 1990 a site was established in Lake Michigan to continuously monitor the offshore thermal structure and vertical velocity profile. The site is located near the center of the lake's southern basin in 160 m of water. Temperature is measured at 16 depths (winter) to 28 depths (summer), and the horizontal velocity components are measured at 5 levels which allows us to characterize the offshore environment with high temporal resolution. The goals of this effort are to provide basic physical measurements to better describe the flow of energy through the lake ecosystem and to provide a basis against which future change can be better gauged.     

Correction to: Multilevel Graph Partitioning for Three-Dimensional Discrete Fracture Network Flow Simulations

Mathematical Geosciences - The publication of this article unfortunately contained a mistake. The assignment to the affiliations of author Satish Karra was not correct     

GHR1 Zircon – A New Eocene Natural Reference Material for Microbeam U‐Pb Geochronology and Hf Isotopic Analysis of Zircon

We present multitechnique U‐Pb geochronology and Hf isotopic data from zircon separated from rapakivi biotite granite within the Eocene Golden Horn batholith in Washington, USA. A weighted mean of twenty‐five Th‐corrected ²⁰⁶Pb/²³⁸U zircon dates produced at two independent laboratories using chemical abrasion‐isotope dilution‐thermal ionisation mass spectrometry (CA‐ID‐TIMS) is 48.106 ± 0.023 Ma (2s analytical including tracer uncertainties, MSWD = 1.53) and is our recommended date for GHR1 zircon. Microbeam ²⁰⁶Pb/²³⁸U dates from laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) and secondary ion mass spectrometry (SIMS) laboratories are reproducible and in agreement with the CA‐ID‐TIMS date to within < 1.5%. Solution multi‐collector ICP‐MS (MC‐ICP‐MS) measurements of Hf isotopes from chemically purified aliquots of GHR1 yield a mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.283050 ± 17 (2s, n = 10), corresponding to a εHf₀ of +9.3. Hafnium isotopic measurements from two LA‐ICP‐MS laboratories are in agreement with the solution MC‐ICP‐MS value. The reproducibility of ²⁰⁶Pb/²³⁸U and ¹⁷⁶Hf/¹⁷⁷Hf ratios from GHR1 zircon across a variety of measurement techniques demonstrates their homogeneity in most grains. Additionally, the effectively limitless reserves of GHR1 material from an accessible exposure suggest that GHR1 can provide a useful reference material for U‐Pb geochronology of Cenozoic zircon and Hf isotopic measurements of zircon with radiogenic ¹⁷⁶Hf/¹⁷⁷Hf.