Détermination expérimentale des paramètres équivalents d'un milieu poreux hétérogène en écoulements uniforme ou radial

Tracer tests are carried out in a heterogeneous porous medium that has a 3D correlated random distribution of the permeabilities. The fitting of numerical models provides the values of equivalent permeability and macrodispersivity characterizing a 2D homogeneous horizontal medium. Different flow configurations are studied: uniform, radial and pump and treat (doublet). The fitted parameter sets are independent of the flow type, except for the doublet. They are greater than the values predicted by stochastic theories, due to the small number of correlation lengths explored by the tracer and the limited extension of the experimental set-up. To cite this article: C. Danquigny, P. Ackerer, C. R. Geoscience 337 (2005).     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

Hydrogen isotopic composition of water from fossil micrometeorites in howardites

We have measured the hydrogen isotopic composition (D/H ratios) of the water from 13 carbonaceous chondritic microclasts (CCMs, size <1 mm) trapped in two howardites (Kapoeta and Yamato-793497) early in the evolution of Solar System. The division into tochilinite-rich; magnetite-rich, olivine-poor; magnetite-rich, olivine-rich CCM types is corroborated by the hydrogen isotopic compositions. Both mineralogy and hydrogen isotopic compositions demonstrate that tochilinite-rich CCMs represent CM2 chondritic matter. In contrast, there is no good match between the isotopic and mineralogical properties of the magnetite-rich CCMs and the known groups of carbonaceous chondrites, suggesting that magnetite-rich CCMs represent a new kind of chondritic matter, not yet sampled in meteorite collections. This demonstrates that the view of the asteroid belt revealed by the collection of meteorites is incomplete. The study of (micro)clasts offers a unique opportunity to better decipher the nature and relative abundance of asteroids.The average hydrogen isotopic composition of water belonging to CCMs, D/H = (152.0 ± 4.8) × 10⁻⁶ (1σ_m), is similar to that of Antarctic micrometeorites (AMMs), D/H = (161.2 ± 3.8) × 10⁻⁶ (1σ_m). The similarity, in terms of mineralogy and hydrogen isotopic composition, between CCMs and AMMs demonstrates that the composition of the micrometeorites has not been modified over the whole history of the Solar System. It indicates that the composition of the micrometeorite flux onto Earth has been, and is, dominated by a mixture of CM2-like; magnetite-rich, olivine-poor; magnetite-rich, olivine-rich carbonaceous chondritic matter exemplified by CCMs found in howardites. Because CCMs have not suffered atmospheric entry, they provide an abundant source of pristine micrometeorites.The average D/H ratio of the whole population of CCMs is identical within errors to that of the Earth (149 ± 3 × 10⁻⁶). The match between the CCMs D/H ratio and that of the Earth is especially remarkable because 1) three different populations of CCMs are needed to make the D/H ratio of the Earth; 2) there is no single carbonaceous chondrite group for which a similar match exists. This observation suggests that CCMs population might be representative of the late veneer agent(s) that delivered water to the Earth.     

Thallium diagenesis in lacustrine sediments

Dated sediment cores and porewaters from two Canadian Shield lakes, located 40 km from Québec City (L. Tantaré) and 25 km downwind from an important smelter in northwestern Québec (L. Vose), were analyzed for thallium and other geochemical variables. Atmospheric deposition is the only source of anthropogenic Tl to these lakes. The porewater Tl concentration profiles in L. Tantaré display a peak below the sediment-water interface that suggests post-depositional Tl remobilization and transport to the overlying water and deeper sediments; such a dissolved Tl peak occurs just above the sediment-water interface in L. Vose. Modeling the porewater Tl profiles with a diagenetic reaction-transport equation reveals a zone of dissolved Tl production lying above a zone of Tl consumption in L. Tantaré sediments. In contrast, in L. Vose, Tl diffuses across the sediment-water interface from the anoxic hypolimnion and is fixed to the surficial sediments. The localization of the consumption zones, the shape of the dissolved Tl, sulfide and iron profiles, as well as calculations of saturation states are all consistent with the removal of Tl from porewater by co-precipitation with and/or adsorption to Fe sulfides. The concentrations of Tl removed from or added to sediments after their deposition (i.e., diagenetic Tl) amount to up to 36% of measured sediment Tl concentrations. Comparison of the reconstructed historical Tl records with those of polycyclic aromatic hydrocarbons (PAHs) and of Pb originating from coal burning or from smelting activities indicate that coal combustion is the major source of atmospheric Tl to L. Tantaré and that an additional important Tl source to L. Vose is the nearby smelter.     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Segmentation and kinematics of the North America‐Caribbean plate boundary offshore Hispaniola

We explored the submarine portions of the Enriquillo–Plantain Garden Fault zone (EPGFZ) and the Septentrional–Oriente Fault zone (SOFZ) along the Northern Caribbean plate boundary using high‐resolution multibeam echo‐sounding and shallow seismic reflection. The bathymetric data shed light on poorly documented or previously unknown submarine fault zones running over 200 km between Haiti and Jamaica (EPGFZ) and 300 km between the Dominican Republic and Cuba (SOFZ). The primary plate‐boundary structures are a series of strike‐slip fault segments associated with pressure ridges, restraining bends, step overs and dogleg offsets indicating very active tectonics. Several distinct segments 50–100 km long cut across pre‐existing structures inherited from former tectonic regimes or bypass recent morphologies formed under the current strike‐slip regime. Along the most recent trace of the SOFZ, we measured a strike‐slip offset of 16.5 km, which indicates steady activity for the past ~1.8 Ma if its current GPS‐derived motion of 9.8 ± 2 mm a^?1 has remained stable during the entire Quaternary.     

Analysis of the interannual variability of annual daily extreme water levels in the St Lawrence River and Lake Ontario from 1918 to 2010

We compared the interannual variability of annual daily maximum and minimum extreme water levels in Lake Ontario and the St Lawrence River (Sorel station) from 1918 to 2010, using several statistical tests. The interannual variability of annual daily maximum extreme water levels in Lake Ontario is characterized by a positive long‐term trend showing two shifts in mean (1929–1930 and 1942–1943) and a single shift in variance (in 1958–1959). In contrast, for the St Lawrence River, this interannual variability is characterized by a negative long‐term trend with a single shift in mean, which occurred in 1955–1956. As for annual daily minimum extreme water levels, their interannual variability shows no significant long‐term change in trend. However, for Lake Ontario, the interannual variability of these water levels shows two shifts in mean, which are synchronous with those for maximum water levels, and a single shift in variance, which occurred in 1965–1966. These changes in trend and stationarity (mean and variance) are thought to be due to factors both climatic (the Great Drought of the 1930s) and human (digging of the Seaway and construction of several dams and locks during the 1950s). Despite this change in means and variance, the four series are clearly described by the generalized extreme value distribution. Finally, annual daily maximum and minimum extreme water levels in the St Lawrence and Lake Ontario are negatively correlated with Atlantic multidecadal oscillation over the period from 1918 to 2010. Copyright © 2013 John Wiley & Sons, Ltd.