A three-dimensional approach to fault seal analysis: fault-block juxtaposition & argillaceous smear modelling

Three‐dimensional (3D) numerical modelling of fault displacement enables the building of geological models to represent the complex 3D geometry and geological properties of faulted sedimentary basins. Using these models, cross‐fault juxtaposition relationships are predicted in 3D space and through time, based on the geometries of strata that are cut by faults. Forward modelling of fault development allows a 3D prediction of fault‐zone argillaceous smear using a 3D application of the Shale Gouge Ratio. Numerical models of the Artemis Field, Southern North Sea, UK and the Moab Fault, Utah, USA are used to demonstrate the developed techniques and compare them to traditional one‐ and two‐dimensional solutions. These examples demonstrate that a 3D analysis leads to significant improvements in the prediction of fault seal, the analysis of the interaction of the sealing properties of multiple faults, and the interpretation of fault seal within the context of sedimentary basin geometry.     

A Search for a Globular Cluster whose Passage Through the Galactic Disk Could Induce the Formation of the Gould Belt

The distribution of sites where globular clusters have crossed the Galactic disk during the last 100 million years has been analyzed using the most recent kinematic data for 133 globular clusters (GCs). ThreeGCs (NGC 6341, NGC 7078, and ω Cen) whose distances between the positions where they crossed the Galactic disk and trajectories of the Gould Belt are less than 20% of their heliocentric distances at the crossing time (82, 98, and 96 million years ago, respectively) have been identified. For each of the clusters, this was their next to last, rather than their last, crossing of the Galactic disk. The passage of any one of these three GCs through the disk could potentially have initiated the formation of the Gould Belt.     

Existence of transverse waves in anisotropic poroelastic media

Out of the four waves in an anisotropic poroelastic medium, two are termed as quasi-transverse waves. The prefix 'quasi' refers to their polarizations being nearly, but not exactly, perpendicular to direction of propagation. In this composite medium, unlike perfectly elastic medium, the propagation of a longitudinal wave along a phase direction may not be accompanied by transverse waves. The existence of a transverse wave in anisotropic poroelastic media is ensured by the two equations restricting the choice of elastic coefficients of porous aggregate as well as fluid–solid coupling. Necessary and sufficient conditions for the existence of transverse waves along the coordinate axes and in the coordinate planes for general anisotropy are discussed. The discussion is extended to the case of orthotropic materials and existence for few specific phase directions is also explored. The conditions for the transverse waves decided on the basis of their apparent polarizations, that is, particle motion being perpendicular to ray direction, are also discussed. For a particular numerical model, the existence of these apparent transverse waves is solved numerically for phase directions in coordinate planes. For general directions of phase propagation, the existence of these transverse waves is checked graphically for the chosen numerical model.     

Vulnerability of Kuwait coast to sea level rise

Assessing coastal vulnerability to sea level rise (SLR) at local and regional scales is a fundamental step for designing successful long-term coastal management plans. This study was thus designed to assess Kuwait coastal vulnerability to SLR at four scenarios (.5, 1, 1.5 and 2 m). Potential inundated areas and the number of people at risk were estimated based on these SLR scenarios. A coastal vulnerability index (CVI) map of Kuwait was then computed based on the lowest scenario using eight parameters: elevation, coastal slope, geomorphology, distance to 20-m isobath, population, land use, cultural heritage and transportation. The geographic distribution of inundated areas at an SLR of .5 m revealed that the northern islands of Kuwait and coastal areas along Kuwait Bay would be highly impacted, whereas the coastal area near Shuaibah Port was the most influenced among the southern coasts. Most of the coastal area exhibited a moderate vulnerability to SLR, especially the northern islands. This study presented an initial vulnerability assessment for Kuwait coasts to SLR, which can be extended with more variables. The integrated remote sensing and geographic information system methodology demonstrated in this study can be applied in similar studies elsewhere.     

First Byurakan Spectral Sky Survey. Stars of Late Spectral Types. XI. Zone -7° ≤ δ ≤ -3°

The eleventh list of faint late M and carbon type stars detected on the plates of the First Byurakan Spectral Survey in zone -7° -3° and covering about 1000 square degrees is presented. From 126 detected stars, 88 are newly discovered objects: they are 6 carbon stars, 8 carbon star candidates, and 74 M-type stars; among the latter 38 (26 PSC + 12 FSC) are unclassified IRAS sources, and one object is an unclassified ROSAT source. Distances to the 6 newly discovered early-type carbon stars are estimated. Equatorial coordinates, red magnitudes, and spectral classes determined from the Palomar E-charts are provided. The lack of optical counterparts on Palomar O and E maps for two detected late M-type stars indicates a large variability in brightnesses of these objects (amplitude not smaller than 7.0 magnitude).     

Sources of dissolved REE in mountainous streams draining granitic rocks, Sierras Pampeanas (Córdoba, Argentina)

Stream waters draining granitic terrains from the highest part (850 to 2200 m a.s.l.) of Sierras Pampeanas (Córdoba, Argentina, ∼32°S, ∼65°W) were sampled in order to define sources and distribution of dissolved rare earth elements (REE), and to describe the geochemical processes that govern their mobility. The contribution of the regional granite to the dissolved REE pool in stream water is limited due to the physical conditions predominating in the area (i.e., steep slopes and semiarid climate). Therefore, precipitation is considered a seasonally significant source controlling REE concentration in stream water. Dissolved REE concentrations are inversely correlated with monthly precipitation and rainfall frequency. During the rainy season (i.e., the austral summer) REE concentrations in stream water are lower than during the dry season (i.e., austral winter). Such low concentrations reflect the balance between the REE input from precipitation and their removal by adsorption. In contrast, during the dry season, the longer residence time of water within fractures and colluvium determines an increased REE concentration in the base flow. Lower pH values also contribute to raise REE concentration through desorption from mineral surfaces.     

Testing links between river patterns and in-channel characteristics using MRPP and ANOVA

This study tests the assumption that the characteristics of channels within multiple channel rivers are different from those of single channel rivers. Some river restoration approaches propose radical transformation of river patterns, from multiple to single channels, based on the link between river patterns and their in-channel characteristics. Determining the links between river patterns and their in-channel characteristics is complicated by differences in geology, history, climate and discharge among rivers. Furthermore, multiple channel rivers are composed of a mosaic of channel types with a range of in-channel characteristics. This study minimizes these problems by analysing a single river containing neighbouring single and multiple channel patterns with little change in discharge downstream, and by analysing all channel types. The study addressed two objectives: to determine the hydraulic geometry, energy, and sediment mobility characteristics of neighbouring single and multiple channel river patterns, and to test for statistical differences in these characteristics between patterns. The Renous River shows a wandering pattern for 11.5 km, with multiple channels around semipermanent islands and abandoned channels in the flood plain. The river displays a single channel river pattern where channels are confined by their valley walls, upstream and downstream of wandering. The analysis was conducted at three scales. First, the confined single channel and wandering multiple channel patterns were compared (pattern scale). Second, the confined channel pattern was compared to single and multiple channel sections within the wandering pattern (section scale). Third, all channel types were compared (channel type scale). Multi response permutation procedure (MRPP) and analysis of variance (ANOVA) were used to analyze differences between channels. Difference tests found no simple discrimination between the single and multiple channel river patterns of the Renous River. Tests between the single confined and multiple wandering channel patterns found few differences in the in-channel variables. The tests did find differences between multiple channel sections within the wandering pattern and confined single channels; however, a greater number of differences were found between multiple channel and single channel sections within the wandering pattern, highlighting the variability within the wandering pattern. Two groups emerged when all channel types were tested for differences: perennial main-channels containing the thalweg, and ephemeral side-channels. Therefore, side-channels define the in-channel characteristics of wandering rivers because few differences were found among main-channels in either pattern. This analysis suggests that all channel types, not just main-channels, should be investigated to obtain a complete picture of a river pattern prior to any restoration efforts. Engineers must exercise caution when applying the link between river patterns and in-channel characteristics to river restoration efforts.     

P- and S-wave anisotropy of a synthetic sandstone with controlled crack geometryl1

A method is reported for the production of synthetic porous sandstones containing cracks of known dimensions and geometry with respect to the matrix. A synthetic sandstone was manufactured from Sand cemented with an epoxy glue. The cracks of known geometry were introduced into the material in the manufacturing stage, by emplacing thin metallic discs in the Sand-epoxy matrix. These discs were chemically leached out of the consolidated porous sandstone. Acoustic anisotropy. and shear-wave splitting were observed in the synthetic sandstones. For the dry sample the observed angular dependence of the P- and S- wave velocities (at 100 kHz) compares well, qualitatively, with the theoretical models of Hudson and of Thomsen. Quantitatively, however, the experimental data fits Hudson's model better. For the case of a saturated sample the experimental results are in excellent agreement with Thomsen's model. Hudson's model, on the other hand, predicts a different angular dependence for P-waves. This demonstrates that the concept of fluid transfer between cracks and the ambient porosity can be a significant process. The results reported here are from the first successful experiment in which the theoretical models were tested on a porous material containing a known crack geometry.