Range imaging: a new method for high‐resolution topographic measurements in small‐ and medium‐scale field sites

Topographic measurements are essential for the study of earth surface processes. Three‐dimensional data have been conventionally obtained through terrestrial laser scanning or photogrammetric methods. However, particularly in steep and rough terrain, high‐resolution field measurements remain challenging and often require new creative approaches. In this paper, range imaging is evaluated as an alternative method for obtaining surface data in such complex environments. Range imaging is an emerging time‐of‐flight technology, using phase shift measurements on a multi‐pixel sensor to generate a distance image of a surface. Its suitability for field measurements has yet not been tested. We found ambient light and surface reflectivity to be the main factors affecting error in distance measurements. Low‐reflectivity surfaces and strong illumination contrasts under direct exposure to sunlight lead to noisy distance measurements. However, regardless of lighting conditions, the accuracy of range imaging was markedly improved by averaging multiple images of the same scene. For medium ambient lighting (shade) and a light‐coloured surface the measurement uncertainty was approximately 9 mm. To further test the suitability of range imaging for field applications we measured a reach of a steep mountain stream with a horizontal resolution of approximately 1 cm (in the focal plane of the camera), allowing for the interpolation of a digital elevation model on a 2 cm grid. Comparison with an elevation model obtained from terrestrial laser scanning for the same site revealed that both models show similar degrees of topographic detail. Despite limitations in measurement range and accuracy, particularly at bright ambient lighting, range imaging offers three‐dimensional data in real time and video mode without the need of post‐processing. Therefore, range imaging is a useful complement or alternative to existing methods for high‐resolution measurements in small‐ to medium‐scale field sites. Copyright © 2012 John Wiley & Sons, Ltd.     

Community preparedness for lava flows from Mauna Loa and Hualālai volcanoes,Kona, Hawai‘i

Lava flows from Mauna Loa and Huallai volcanoes are a major volcanic hazard that could impact the western portion of the island of Hawaii (e.g., Kona). The most recent eruptions of these two volcanoes to affect Kona occurred in a.d. 1950 and ca. 1800, respectively. In contrast, in eastern Hawaii, eruptions of neighboring Klauea volcano have occurred frequently since 1955, and therefore have been the focus for hazard mitigation. Official preparedness and response measures are therefore modeled on typical eruptions of Klauea.The combinations of short-lived precursory activity (e.g., volcanic tremor) at Mauna Loa, the potential for fast-moving lava flows, and the proximity of Kona communities to potential vents represent significant emergency management concerns in Kona. Less is known about past eruptions of Huallai, but similar concerns exist. Future lava flows present an increased threat to personal safety because of the short times that may be available for responding.Mitigation must address not only the specific characteristics of volcanic hazards in Kona, but also the manner in which the hazards relate to the communities likely to be affected. This paper describes the first steps in developing effective mitigation plans: measuring the current state of peoples knowledge of eruption parameters and the implications for their safety. We present results of a questionnaire survey administered to 462 high school students and adults in Kona. The rationale for this study was the long lapsed time since the last Kona eruption, and the high population growth and expansion of infrastructure over this time interval. Anticipated future growth in social and economic infrastructure in this area provides additional justification for this work.The residents of Kona have received little or no specific information about how to react to future volcanic eruptions or warnings, and short-term preparedness levels are low. Respondents appear uncertain about how to respond to threatening lava flows and overestimate the minimum time available to react, suggesting that personal risk levels are unnecessarily high. A successful volcanic warning plan in Kona must be tailored to meet the unique situation there.     

Can marine fisheries and aquaculture meet fish demand from a growing human population in a changing climate?

Expansion in the world's human population and economic development will increase future demand for fish products. As global fisheries yield is constrained by ecosystems productivity and management effectiveness, per capita fish consumption can only be maintained or increased if aquaculture makes an increasing contribution to the volume and stability of global fish supplies. Here, we use predictions of changes in global and regional climate (according to IPCC emissions scenario A1B), marine ecosystem and fisheries production estimates from high resolution regional models, human population size estimates from United Nations prospects, fishmeal and oil price estimations, and projections of the technological development in aquaculture feed technology, to investigate the feasibility of sustaining current and increased per capita fish consumption rates in 2050. We conclude that meeting current and larger consumption rates is feasible, despite a growing population and the impacts of climate change on potential fisheries production, but only if fish resources are managed sustainably and the animal feeds industry reduces its reliance on wild fish. Ineffective fisheries management and rising fishmeal prices driven by greater demand could, however, compromise future aquaculture production and the availability of fish products.     

Sedimentary development of the Louisiana continental shelf related to sea level cycles: Part II—seismic response

Cyclic sequences occur worldwide in nearly every stratigraphic sequence; they are particularly well-developed in fluvial and deltaic sediments that have been influenced by high-frequency eustatic sea-level fluctuations. The large data base for this study (including 471 deep foundation borings, thousands of line kilometers of high-resolution seismic, and sedimentological and dating analyses) represents the most complete information on high-resolution chronostratigraphy and lithostratigraphy that is available on any modern continental shelf/upper slope. These data are used to document sedimentological characteristics and high-resolution seismic responses during three complete sea-level cycles over the entire continental shelf/upper slope of offshore Louisiana. Examination of high-resolution seismic records indicates that well-defined, high-amplitude, laterally continuous reflectors correlate with rising and high stand condensed sedimentary sequences and that the deposits laid down during falling and low-stand periods (expanded sections) are characterized by a wide range of acoustic responses. Discontinuous reflectors with high-amplitude variability, continuous parallel reflectors, and chaotic and amorphous zones are common acoustic responses. The association between a particular lithofacies and a specific acoustic response on 3.5-kHz records was found to be very poor.     

Recent sediment transport and accumulation on the NW Iberian margin

Five transects across the NW Iberian margin were studied in the framework of the EU-funded Ocean Margin EXchange II (OMEX II) project, to determine and establish recent sediment and organic carbon transport and accumulation processes and fluxes.On the Galician shelf and shelf edge, resuspension of sediments resulting in well-developed bottom nepheloid layers was observed at all stations, but transport of suspended sediment appears largely confined to the shelf. On the continental slope, only very dilute bottom nepheloid layers were present, and intermediate nepheloid layers were only occasionally seen. This suggests that cross-slope transfer of particles is limited by the prevailing northerly directed shelf and slope currents.Optical backscatter and ADCP current measurements by the BOBO lander, deployed at 2152 m depth on the Galician slope, indicated that particles in the bottom boundary layer were kept in suspension by tidal currents with highest speeds between 15–25 cm s⁻¹. Net currents during the recording period August 6th–September 10th 1998, were initially directed along-slope toward the NNW, but later turned off-slope toward the SW.The separation of the water masses on the slope from the sediment-laden shelf water by the along-slope current regime is reflected in the recent sedimentary deposits of the Galician shelf and slope. Apart from compositional differences, shelf deposits differ from those on the slope by their higher flux of excess ²¹⁰Pb (0.57–5.37 dpm cm⁻²y⁻¹ versus 0.11–3.00 dpm cm⁻²y⁻¹), a much higher sediment accumulation rate (315.6–2295.9 g m⁻²y⁻¹ versus 10.9–124.7 g m⁻²y⁻¹) and organic carbon burial rate (1.01–34.30 g m⁻²y⁻¹ versus 0.01–0.69 g m⁻²y⁻¹).In contrast to the observations on the Galician margin, pronounced nepheloid layers occurred in the Nazaré Canyon, which extended to considerably greater water depths. This indicates that significantly greater transport of fine-grained particles in both the INL and the BNL was occurring within the canyon, as reflected in the exceptionally high ²¹⁰Pb excess flux (up to 34.09 dpm cm⁻²y⁻¹), mass accumulation rates (maximum 9623.1 g m⁻²y⁻¹) and carbon burial fluxes (up to 180.91 g m⁻²y⁻¹) in the sediment. However, radioisotope fluxes in the lower canyon were only slightly higher than at comparable depths on the Galician margin. This suggests that transport and rapid accumulation is focused on the upper and middle part of the canyon, from where it is episodically released to the deep sea. Compared to the Galician margin, the Nazaré Canyon may be considered as an important organic carbon depocenter on short time-scales, and a major conduit for particulate matter transport to the deep sea on >100 y time-scales.     

Chemical composition of nyerereite and gregoryite from natrocarbonatites of Oldoinyo Lengai volcano,Tanzania

Alkali carbonates nyerereite, ideally Na₂Ca(CO₃)₂ and gregoryite, ideally Na₂CO₃, are the major minerals in natrocarbonatite lavas from Oldoinyo Lengai volcano, northern Tanzania. They occur as pheno- and microphenocrysts in groundmass consisting of fluorite and sylvite; nyerereite typically forms prismatic crystals and gregoryite occurs as round, oval crystals. Both minerals are characterized by relatively high contents of various minor elements. Raman spectroscopy data indicate the presence of sulfur and phosphorous as (SO₄)²⁻ and (PO₄)³⁻ groups. Microprobe analyses show variable composition of both nyerereite and gregoryite. Nyerereite contains 6.1–8.7 wt % K₂O, with subordinate amounts of SrO (1.7–3.3 wt %), BaO (0.3–1.6 wt %), SO₃ (0.8–1.5 wt %), P₂O₅ (0.2–0.8 wt %) and Cl (0.1–0.35 wt %). Gregoryite contains 5.0–11.9 wt % CaO, 3.4–5.8 wt % SO₃, 1.3–4.6 wt % P₂O₅, 0.6–1.0 wt % SrO, 0.1–0.6 wt % BaO and 0.3–0.7 wt % Cl. The content of F is below detection limits in nyerereite and gregoryite. Laser ablation ICP-MS analyses show that REE, Mn, Mg, Rb and Li are typical trace elements in these minerals. Nyerereite is enriched in REE (up to 1080 ppm) and Rb (up to 140 ppm), while gregoryite contains more Mg (up to 367 ppm) and Li (up to 241 ppm) as compared with nyerereite.     

江西彭山锡多金属矿田地质地球化学特征研究

彭山锡多金属矿田位于长江中下游的九瑞地区，是近年来发现的一个以富锡、铅、锌矿产为主的大型矿田。以黑云母二长花岗岩与二云母碱长化岗岩组成的彭山隐伏岩体为中心，各类金属矿床呈“晕圈式”分布。矿床的形成分为2个成矿期共7个阶段，通过对彭山岩体、典型矿床及围岩中的硫同位素、铅同位素、包裹体及稀土资料进行分析，反映出燕山晚期钙碱性花岗岩体的缦位与多金属矿床的形成有着密切的联系，岩浆活动为本区提供了大量的成矿物质。