Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

AN ECOLOGICAL STUDY OF BENTHIC ORGANISMS IN THE NEARSHORE WATERS TO THE WEST OF TAIWAN STRAIT

In seven cruises on benthic organisms in the nearshore waters(>50 m) to the west of the Taiwan Strait(23°20''-25°54''N,117°11''-119°58''E) in 1961-1964,altogether 189 stations of quantitative grabbing and 33 stations of qualitative trawling were made.
Altogether 392 species of benthic organisms have been identified.The composition was dominated by nearshore shallow water species,with tropical and subtropical species absolutely dominant.The total average of biomass was 38.0 g/m² and average density,116.0 ind./m².The communities of benthic organisms in the area can be classified into five communities namely,(1) Amphiura sp.-Acaudina molpadioides Community;(2) Protankyra asymmetrica-Arnphioplus pracstans-Murex trapa Community;(3) Modiolus meicalfei-Phyllophorus liuwutiensis-Armandia letocirris-Nephtys sinensis Community;(4) Branchiostoma belcheri-Solenr oseomaculatus-Marphysa sinensis- Onuphis eremita Community;(5) Iconomtra japonica-Barbatia decussata Community.     

黄河河口演变(Ⅰ) --(一)河口水文特征

本文利用20世纪后半个世纪的完整实测资料，研究了河口径流量与输沙量的变化，自50年代至90年代呈明显递减。对黄河口的水文特征：水情、沙情、断流、离子流量、滨海潮汐、潮流、余流、温、盐度分布、风暴潮、拦门沙与盐水楔等作出定性和定量的论述。对断流的危害、成因及缓解对策作出分析。河口淤积、延伸、改道对黄河下游的影响也作出时空上的定量分析。对1855年以来近代黄河三角洲海岸线变化，作出了定量研究。     

贻贝(Mytilus edulis Linnaeus)唇瓣的扫描电镜观察

本文运用扫描电子显微镜技术研究了贻贝唇瓣的形态结，结果表明，贻贝唇瓣外部形态呈羽毛状，分为光滑面和皱褶面；褶皱面表面被覆浓密纤毛，分有沟嵴和无嵴两部分，界限明显，光滑面纤毛较少，呈簇状，分布不均，在褶皱面中央分界处和光滑面的一侧，有大量球状突起，为杯状细胞所在，纤毛和粘液在食物分拣和运输中起重要作用。     

魁蚶线粒体16S rRNA和COI基因片段序列测定及其应用前景

魁蚶（Ｓｃａｐｈａｒｃａｂｒｏｕｇｈｔｏｎｉｉ）是蚶科贝类的一种大型经济种类，主要分布于我国、日本和朝鲜半岛及俄罗斯东南部沿海。在我国，主要分布于辽宁、河北和山东沿海，生活在３～５０ｍ（多为２０～３０ｍ）水深的软泥或泥沙质海底，是我国北方沿海重要的经济贝类之一。但但有有关关其其自自然然群群体体的的遗遗传传变变异异及及群群体体间间遗遗传传分分化化等等方方面面的的研研究究不不多多 ;;同同时时，，作作者者和和日日本本研研究究者者发发现现，，中中国国、、韩韩国国和和日日本本魁魁蚶蚶群群体体在在形形态态和…     

中华齿米虾胰蛋白酶基因的研究

以中华齿米虾(Neocaridina denticulata sinensis)基因组DNA为模板,根据胰蛋白酶基因保守序列设计简并引物,利用PCR技术获得一个基因。序列分析表明此基因与已报道的凡纳滨对虾(Litopenaeus vannamei)胰蛋白酶基因有较高的相似度,序列中包含一个内含子和两个不完整的外显子,编码182个氨基酸残基。该氨基酸序列与凡纳滨对虾胰蛋白酶氨基酸序列的相似度为83.5%;含有胰蛋白酶所特有的His、Asp和Ser组成的活性三联体、决定胰蛋白酶底物专一性的Asp、底物结合部位的G1y残基。综合分析认定该基因为胰蛋白酶基因片断。将其氨基酸序列与报道的其他动物胰蛋白酶氨基酸序列进行了系统进化分析。系统进化分析的结果与现有以表型特征为依据的虾分类结果是一致的。     

Underice Operation of SJT-5 ROV

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.     

黄骅电厂取水河段取水特性的数模与物模研究

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。     

大民屯凹陷地层水水文地质特征与油气聚集关系

对大民屯凹陷前第三系潜山、下第三系沙河街组地层水化学场研究发现，本区油田水总矿化度及二价阳离子浓度偏低，地层水总矿化度具有明显的垂向分带性，水体主要为陆相成因并受地表水渗入的影响较大，变质程度高，油田水的演化与盐类的溶解有关。该区地层水的流动受断裂和沉积砂体的控制，在水头压力、浮力动力场控制下其流动样式和分布规律反映了凹陷内油气的运聚规律，可为本区自生自储、新生古储式油气藏的判别提供有利证据。