Experiments on the primary migration of oil from source rocks

Simulation experiments on the primary migration of oil were carried out on massive samples. The results proved that oil generated from source rocks was expelled in the form of an independent oil phase. High oil-expulsion efficiency was observed. It follows that the primary migration of oil is not directly dependent on the quantity of oil generated from the source rocks. Therefore, the oil-expulsion proportion was high though some source rocks yielded only a limited amount of oil. A great deal of gas was produced at the same time of oil-generation. Thus, it can be concluded that the main expulsion energy for oil primary migration came from these gases.     

利用储层流体包裹体确定鄂尔多斯盆地塔巴庙区块上古生界油气充注期次和时期

流体包裹体是保存在储层中的微小流体样品,包含有丰富的地质信息。通过对鄂尔多斯盆地塔巴庙区块18口井的62块流体包裹体样品进行荧光观察和显微测温,认为该区上古生界地层共发生过6期流体活动,均与油气成藏有关,并以第二期—第六期的天然气充注为主。结合埋藏史分析可知,油气成藏分别发生在距今190～150Ma的早侏罗世中期—中侏罗世晚期,150～124Ma的中侏罗世晚期—早白垩世早期,124～101Ma的早白垩世早期—早白垩世中期,101～86Ma的早白垩世中期—早白垩世中末期和86～70Ma的早白垩世中末期—早白垩世末期。其中,早侏罗世中期—中侏罗世晚期为油气充注的初始阶段,中侏罗世晚期—早白垩世早期为轻质油的主要成藏时期,中侏罗世晚期至早白垩世末为研究区内目的层天然气的主要成藏时期。     

Statistical features of aftershock distribution size for moderate and large earthquakes in Chinese mainland

Based on data of earthquake sequences with MS≥5.0 in Chinese mainland from 1970 to 2004,for different se-quence types and different rupture modes of the main shock,the relationship between aftershock distribution size Rand the magnitude of the main shock M0 has been studied statistically.Considering the rupture mode of the mainshock,we give the quantitative statistical relationships between R and M0 under 95%confidence level for differentsequence types.Qualitatively,lgR,the logarithm of the aftershock distribution size,is positively correlative to theM0,but the data distribution is dispersed.Viewing from different sequence types,the correlation between R and M0is very weak for isolated earthquake type(IET)sequence,R distributes in the range from 5 to 60 km;For main-shock-aftershock type(MAT),lgR is positively correlative to M0;For multiple main shock type(MMT),the core-lation between lgR and M0 is not very obvious when M0≤6.2 and R distributes in the range from 5 to 70 km,whileit shows a linear correlation when M0≥6.3.The statistical results also show that the occupational ratios of differentsequence types for strike-slip and oblique slip are almost the same.But for dip-slip(mostly are thrust mechanisms),the ratio of MAT is higher than that of IET and MMT.Comparing with previous results,it indicates that,when M0is large enough,R is mainly determined by M0 and there is almost no relationship with the rupture mode of themain shock.     

非线性粘滞阻尼器消能结构设计方法探讨

在建立非线形粘滞阻尼器消能结构性能曲线的基础上，建议了依据减震性能目标确定阻尼器参数的概略设计方法。提出了多自由度非线性粘滞阻尼器消能结构的等效阻尼比计算公式。在此基础上建议了适用于多自由度非线性粘滞阻尼器消能结构地震反应预测的模态叠加法，方法与时程分析结果对比吻合良好。为使各层阻尼器参数更好地满足减震性能要求，提出了将概略设计得到的层阻尼器参数依据减振性能目标进行调整的方法。     

中国大陆中强以上地震余震分布尺度的统计特征

依据1970年以来记录相对完备的MSge;5.0地震序列资料，统计研究了中国大陆余震分布尺度与序列最大地震震级M0及最大地震破裂形式之间的关系. 在95%置信概率下，考虑主震破裂形式， 分序列类型给出了余震分布尺度与M0之间的统计关系. 定性而言，余震分布尺度的对数lgR与M0正相关， 但数据分布较为离散. 分类型来看， 孤立型序列余震分布尺度与M0之间统计相关程度低， 余震分布尺度介于5~60 km之间； 主余型序列lgR与M0正相关； 多震型序列当M0le;6.2时lgR与M0之间相关性不显著，余震分布尺度介于5~70 km之间， 当M0ge;6.3时lgR与M0线性相关. 统计结果还表明， 走滑近走滑及斜滑型主震所导致序列类型比例之间没有显著差异，而倾滑近倾滑型主震（主要为逆断型破裂）所导致的主余型序列所占比例较高， 孤立型及多震型序列所占比例则相对较低. 对比研究显示， 当M0较高时，余震分布尺度主要取决于主震大小而与主震破裂形式关系不明显.      

宜宾市宋家地区土壤元素背景值研究及其意义

作者在表层土壤系统采样调查的基础上,计算出宋家地区土壤元素地球化学背景值,并通过与不同区域土壤元素地球化学背景值、基准值的对比研究,总结了该区土壤元素地球化学基本特征,为该区土壤资源、环境评价和农业经济发展规划提供了实用地球化学信息。     

云南丽江苦橄岩Re-Os同位素地球化学初步研究

报导了云南丽江地区大具和仕满剖面12个苦橄岩和6个玄武岩的Re，Os含量和Os同位素组成。苦橄岩和玄武岩具有明显不同的Re-Os体系的特征。苦橄岩具有高的Os元素丰度［(1.5~3)×10-9］和低的Re元素丰度（<0.05×10-9）；共生的玄武岩具有低的Os元素丰度（<0.5×10-9）和相对高的Re元素丰度（<0.8×10-9）；苦橄岩具有低放射成因的 187Os/188Os 比值（0.123 3~0.126 6），而玄武岩具有高放射成因的187Os/188Os比值（0.133 8~0.157 7）。苦橄岩的Re-Os同位素特征与越南西北部二叠—三叠纪科马提岩具有低放射成因Os同位素特征相似，而玄武岩的Re-Os同位素特征与峨眉山大火成岩省（LIP）其他地区玄武岩的高放射成因的Os同位素特征相似。苦橄岩的Re-Os同位素特征表明，形成峨眉山LIP的地幔柱可能来自对流上地幔而不是深部的核-幔界面。换言之，峨眉山LIP的形成受控于岩石圈地幔过程而不是地幔柱过程。     

中国云南哀牢山含海蓝宝石伟晶岩的起源和成岩模拟实验研究

The Ailaoshan aquamarine-bearing pegmatites are associated with Proterozoic metamorphic rocks in the southern portion of the Ailaoshan fault-folded complex.The gem-bearing pegmatite mineralization zones of the region occur in areas generally consistent with the regional tectonic trend.The pegmatites are found in metamorphic rocks,migmatites and in the inner/outer contact zones of gneissoid granites. The Rb-Sr isochron drawn for the pegmatites is 26～31 Ma,(i.e.in Himalayan).The homogenization temperatures of melt and liquid inclusions in minerals vary from 185 to 920℃,which are comparable to the inclusions observed in banded migmatites and ptygmatic quartz veins in the surrounding metamorphic rocks. The mineralization fluids of the pegmatite were rich in HCO_3 and CO_2,and their compositional assemblages are comparable to metamorphic fluids.Results of H,O,C,Si etc.isotopic analyses and REE,and Be analyses indicates that the sources of mineralization components that formed the pegmatites are closely associated with metamorphic fluids and the enclosing metamorphic rocks. A pegmatite structure simulation experiment was conducted at high temperature and pressure(840℃and 1,500×105Pa.),with various metamorphic rock samples in a water-rich and volatile-rich environment.When the liquidus was reached,the temperature was gradually decreased at the rate of 5～10℃/day over a time period of three months.SEM energy-dispersive spectrum analyses were performed on the experimental products.A series of pegmatoid textures were observed including zonal texture,megacryst texture,drusy cavities,crystal druses,and vesicular texture along with more than ten types of minerals including plagioclase,microcline,quartz and biotite.Different metamorphic rock melts generated different mineral assemblages.Experiment results revealed that the partial melting of metamorphic rocks could form melts similar to pegmatite magmas. Based upon the geological characteristics,geochemistry,and pegmatite texture simulation experimental results,it is concluded that the mineralization components of Ailaoshan aquamarine-bearing pegmatites came from metamorphic rocks.The petrogenetic model for the origin of pegmatites is related to ultrametamorphism and metamorphic anatexis.     

因子计量模型法在区域地球化学勘查中的应用

因子分析结果受样品数量的影响，同一件样品的因子计量也随之发生变化，使传统因子计量方法在地球化学数据处理中的应用受到一定的限制。因子计量模型法综合了因子计量的优点和利用模型找矿的思路，通过选定的某一典型地质单元计算因子计量系数矩阵，建立因子计量模型，用模型类比未知区。该方法使因子计量图的地球化学意义更加明确，并且可节省重新处理数据的工作量。因子计量模型方法和传统因子计量方法应用于某地区1：20万水系沉积物地球化学数据处理，因子计量模型法得出的地球化学异常规律性更为明显，更好地反映了区域地质构造与异常的关联性，有利于异常的解释和评价。     

广义相遇法的拓展

当地表不规则时,用广义相遇法求取的折射层速度存在较大误差,针对于此,这里提出了一种基于广义相遇法的广义相遇静校圆滑法。其步骤如下:①利用广义相遇法求出针对不同XY值的广义相遇速度解析值和时间深度值;②根据时间深度值求出"静校正量",然后从旅行时间中减去静校正量;③绘出广义相遇速度解析曲线,求出速度。其中的步骤②,是把所求的静校正量从旅行时间中减去,就是把地表的影响消除,所以得到的值基本不受地表的影响。对某一模型用此方法,取得了比较理想的效果,尤其是对于地表比较小范围的突然变化,有很明显的效果。实践证明,该方法极大地提高了传统广义相遇法求取折射层波速的精度。