Evolution of the Kivu Rift,East Africa: interplay among tectonics,sedimentation and magmatism

The seismically and volcanically active Kivu Rift, in the western branch of the East African Rift System, is a type locale for studies of high‐elevation, humid‐climate rift basins, as well as magmatic basin development. Interpretations of offshore multi‐channel seismic (MCS) reflection data, terrestrial radar topography, lake bathymetry and seismicity data recorded on a temporary array provide new insights into the structure, stratigraphy and evolution of the Kivu rift. The Kivu rift is an asymmetric graben controlled on its west side by a ca. 110 km‐long, N‐S striking border fault. The southern basins of the lake and the upper Rusizi river basin are an accommodation zone effectively linking 1470 m‐high Lake Kivu to 770 m‐high Lake Tanganyika. MCS data in the eastern Kivu lake basin reveal a west‐dipping half graben with at least 1.5 km of sedimentary section; most of the ca. 2 km of extension in this sub‐basin is accommodated by the east‐dipping Iwawa normal fault, which bounds an intrabasinal horst. Lake Kivu experienced at least three periods of near desiccation. The two most recent of these approximately correlate to the African Megadrought and Last Glacial Maximum. There was a rapid lake level transgression of at least 400 m in the early Holocene. The line load of the Virunga volcanic chain enhances the fault‐controlled basin subsidence; simple elastic plate models suggest that the line load of the Virunga volcanic chain depresses the basin by more than 1 km, reduces flank uplift locally and broadens the depocentre. Not only do the voluminous magmatism and degassing to the lake pose a hazard to the riparian population, but our studies demonstrate that magmatism has important implications for short‐term processes such as lake levels, inflow and outlets, as well as long term modification of classic half‐graben basin morphology.     

DISCUSSION: APPLICATION OF THE QDa–Md METHOD OF ENVIRONMENTAL DISCRIMINATION TO PARTICLE SIZE ANALYSIS OF FINE SEDIMENTS

Duck's recent finding (R. W. Duck, Earth Surface Processes and Landforms, 1994, 19 , 525–529) that QDa and Md parameters derived from pipette and SediGraph analysis of sediments from Loch Tummel returned similar results can be interpreted in two ways. The observed consistency could result from (i) a general agreement between the methods (as is suggested by Duck) or (ii) from the use of inappropriate parameters (Md and QDa) to describe polymodal distributions.     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Predicted signatures of pulsed reconnection in ESR data

Early in 1996, the latest of the European inco-herent-scatter (EISCAT) radars came into operation on the Svalbard islands. The EISCAT Svalbard Radar (ESR) has been built in order to study the ionosphere in the northern polar cap and in particular, the dayside cusp. Conditions in the upper atmosphere in the cusp region are complex, with magnetosheath plasma cascading freely into the atmosphere along open magnetic field lines as a result of magnetic reconnection at the dayside magnetopause. A model has been developed to predict the effects of pulsed reconnection and the subsequent cusp precipitation in the ionosphere. Using this model we have successfully recreated some of the major features seen in photometer and satellite data within the cusp. In this paper, the work is extended to predict the signatures of pulsed reconnection in ESR data when the radar is pointed along the magnetic field. It is expected that enhancements in both electron concentration and electron temperature will be observed. Whether these enhancements are continuous in time or occur as a series of separate events is shown to depend critically on where the open/closed field-line boundary is with respect to the radar. This is shown to be particularly true when reconnection pulses are superposed on a steady background rate.     

The Mars oxidant experiment (MOx) for Mars '96

The MOx instrument was developed to characterize the reactive nature of the martian soil. The objectives of MOx were: (1) to measure the rate of degradation of organics in the martian environment; (2) to determine if the reactions seen by the Viking biology experiments were caused by a soil oxidant and measure the reactivity of the soil and atmosphere: (3) to monitor the degradation, when exposed to the martian environment, of materials of potential use in future missions; and, finally, (4) to develop technologies and approaches that can be part of future soil analysis instrumentation. The basic approach taken in the MOx instrument was to place a variety of materials composed as thin films in contact with the soil and monitor the physical and chemical changes that result. The optical reflectance of the thin films was the primary sensing-mode. Thin films of organic materials, metals, and semiconductors were prepared. Laboratory simulations demonstrated the response of thin films to active oxidants.     

A verification framework for interannual-to-decadal predictions experiments

Decadal predictions have a high profile in the climate science community and beyond, yet very little is known about their skill. Nor is there any agreed protocol for estimating their skill. This paper proposes a sound and coordinated framework for verification of decadal hindcast experiments. The framework is illustrated for decadal hindcasts tailored to meet the requirements and specifications of CMIP5 (Coupled Model Intercomparison Project phase 5). The chosen metrics address key questions about the information content in initialized decadal hindcasts. These questions are: (1) Do the initial conditions in the hindcasts lead to more accurate predictions of the climate, compared to un-initialized climate change projections? and (2) Is the prediction model’s ensemble spread an appropriate representation of forecast uncertainty on average? The first question is addressed through deterministic metrics that compare the initialized and uninitialized hindcasts. The second question is addressed through a probabilistic metric applied to the initialized hindcasts and comparing different ways to ascribe forecast uncertainty. Verification is advocated at smoothed regional scales that can illuminate broad areas of predictability, as well as at the grid scale, since many users of the decadal prediction experiments who feed the climate data into applications or decision models will use the data at grid scale, or downscale it to even higher resolution. An overall statement on skill of CMIP5 decadal hindcasts is not the aim of this paper. The results presented are only illustrative of the framework, which would enable such studies. However, broad conclusions that are beginning to emerge from the CMIP5 results include (1) Most predictability at the interannual-to-decadal scale, relative to climatological averages, comes from external forcing, particularly for temperature; (2) though moderate, additional skill is added by the initial conditions over what is imparted by external forcing alone; however, the impact of initialization may result in overall worse predictions in some regions than provided by uninitialized climate change projections; (3) limited hindcast records and the dearth of climate-quality observational data impede our ability to quantify expected skill as well as model biases; and (4) as is common to seasonal-to-interannual model predictions, the spread of the ensemble members is not necessarily a good representation of forecast uncertainty. The authors recommend that this framework be adopted to serve as a starting point to compare prediction quality across prediction systems. The framework can provide a baseline against which future improvements can be quantified. The framework also provides guidance on the use of these model predictions, which differ in fundamental ways from the climate change projections that much of the community has become familiar with, including adjustment of mean and conditional biases, and consideration of how to best approach forecast uncertainty.     

A combined hydrologic and hydraulic modeling approach for testing efficiency of structural flood control measures

The necessity of estimating the degree and spatial extent of positive impacts with regard to protecting communities and properties through potential flood control projects can be considered one of the main reasons for performing flood modeling. This paper presents an overall systematic approach based on the simulation of some extreme event conditions, using a hydrological model to generate the resulting river flows and then using a hydraulic modeling exercise to decide upon floodplain evolution in the case-study area, Bostanli river basin, which has been under the threat of flooding for many years. The potential serviceability of the planned Bostanli Dam in the study area was examined by using the HEC-HMS and HEC-RAS modeling tools, both integrated with GIS functions for spatial operations. The results indicate that the dam construction as planned would have a somewhat positive impact as a potential flood control measure, since it seems to decrease the flood peaks of 68.9 and 158.7 m³/s (that would potentially be generated by 100- and 500-year storm events under current conditions) to 65.5 and 150.7 m³/s (when the dam is in operation), respectively. However, this seems to contribute little to the overall flood mitigation performance in the basin.     

Low-grade metamorphic rocks from the Pulur complex,NE Turkey: implications for the pre-Liassic evolution of the Eastern Pontides

In the Pulur complex (Sakarya Zone, Eastern Pontides, Turkey) a low-grade tectonometamorphic unit (Doankavak) is exposed in three tectonic windows beneath a complex medium-pressure high-temperature metamorphic unit of late Carboniferous age. The thrust plane between both units is transgressively covered by Liassic conglomerates. The Doankavak unit comprises a sequence of metabasites with MORB-type chemical compositions and phyllites, with subordinate calcareous phyllites, marbles, quarzofeldspathic schists and metacherts. This sequence is interpreted as a former accretionary complex related to the consumption of the Palaeotethys. Mineral parageneses in the metabasites allow for the distinction of two domains with slightly different peak metamorphic conditions, i.e. 375–425 °C/0.5–0.8 GPa (greenschist facies) and 400–470 °C/0.6–1.1 GPa (albite-epidote amphibolite facies). The age of metamorphism is constrained at ~ 260 Ma (early Late Permian) by two Rb-Sr mineral-whole rock ages (hornblende, phengite) and one ⁴⁰Ar/³⁹Ar single step total fusion age (phengite). In conjunction with previous data on other accretionary complexes in the Sakarya zone in Northern Turkey, the data presented in this study suggest a continuous subduction of the Palaeotethys at least from Early/Late Permian to Late Triassic and a discontinuous preservation of accretion complexes in both space and time.     

Element Mobility During Incipient Granulite Formation at Kabbaldurga, Southern India

At Kabbaldurga, infiltration of carbonic fluids along a systemof ductile shears and foliation planes has led to partial transformationof Archaean grey biotite–hornblende gneiss to coarse-grainedmassive charnockite at about 2.5 b.y. ago. The dehydration ofthe gneiss assemblage was induced by a marked metasomatic changeof the reacting system from granodioritic to granitic, and obviouslytook place under conditions of an open system at 700–750?C and 5–7 kb. Extensive replacement of plagioclase (An_16–30)by K-feldspar through Na, Ca–K exchange reactions withthe ascending carbonic fluids led to strong enrichment in K,Rb, Ba, and SiO₂, and to a depletion in Ca. Progressive dissolutionof hornblende, biotite, magnetite, and the accessory mineralsapatite and zircon resulted in a marked depletion in Fe, Mg,Ti, Zn, V, P, and Zr. Most important is the recognition of REEmobility: with advancing charnockitization, the moderately fractionatedREE distribution patterns of the grey gneisses (La_N270; La_N/Yb_N= 5–20; Eu_N27; Eu/Eu^* = 0.6–0.3) give way to stronglyfractionated REE patterns with a positive Eu-anomaly (La_N200;La_N/Yb_N = 20–80; Eu_N22; Eu/Eu^* = 0.6–1.8). The systematicdepletion especially in the HREE is due to the progressive dissolutionof zircon, apatite (and monazite), which strongly concentratethe REE. Stable isotope data (¹⁸O of 6.9–8.0 per mille for gneissesand charnockites; ¹³C of –8.5 and –6.5 per millefor late carbonate) indicate a magmatogenic source for the carbonicfluids. In contrast to the currently favoured derivation ofcarbonic fluids by decarbonation of the upper mantle or degassingof underplated basaltic intrusions, it is discussed here thatabundant fluid inclusions in lower crustal charnockites providedan extensive reservoir of ‘fossil’ carbonic fluids.Shear deformation has tapped this reservoir and generated thechannel-ways for fluid ascent. Charnockitization of the Kabbaldurgatypethus appears to be a metasomatic process which is tectonicallycontrolled and restricted to the crustal level of the amphiboliteto granulite transition.