The accuracy of standard enthalpies and entropies for phases of petrological interest derived from density-functional calculations

The internal energies and entropies of 21 well-known minerals were calculated using the density functional theory (DFT), viz. kyanite, sillimanite, andalusite, albite, microcline, forsterite, fayalite, diopside, jadeite, hedenbergite, pyrope, grossular, talc, pyrophyllite, phlogopite, annite, muscovite, brucite, portlandite, tremolite, and CaTiO₃–perovskite. These thermodynamic quantities were then transformed into standard enthalpies of formation from the elements and standard entropies enabling a direct comparison with tabulated values. The deviations from reference enthalpy and entropy values are in the order of several kJ/mol and several J/mol/K, respectively, from which the former is more relevant. In the case of phase transitions, the DFT-computed thermodynamic data of involved phases turned out to be accurate and using them in phase diagram calculations yields reasonable results. This is shown for the Al₂SiO₅ polymorphs. The DFT-based phase boundaries are comparable to those derived from internally consistent thermodynamic data sets. They even suggest an improvement, because they agree with petrological observations concerning the coexistence of kyanite?+?quartz?+?corundum in high-grade metamorphic rocks, which are not reproduced correctly using internally consistent data sets. The DFT-derived thermodynamic data are also accurate enough for computing the P–T positions of reactions that are characterized by relatively large reaction enthalpies (>?100 kJ/mol), i.e., dehydration reactions. For reactions with small reaction enthalpies (a few kJ/mol), the DFT errors are too large. They, however, are still far better than enthalpy and entropy values obtained from estimation methods.     

A new approach to minimize the loss of life after natural hazards by using Android operating system

Nowadays, the usage rates of smartphones are increasing rapidly. With the versatility of its features, smartphones have succeeded in attracting users. Performing this study has also affected the usage rate of smartphones every day. It is possible to determine the position with GPS (Global Positioning System) technology which is located in smartphones. In this study, smartphone location notification was used to detect the locations of the people who were under debris after the earthquake by means of the phones on them. People who cannot be reached for any reason will be immediately identified, and emergency interventions will be possible. Thus, the survival rate of the injured will be high with early intervention. In this study, it was aimed to minimize the loss of life after the earthquake and all the negativities that would be experienced in society due to this loss. The developed application has been tested in the external world, and the obtained data are given in results section.

     

Satellite estimates and subpixel variability of rainfall in a semi-arid grassland

卫星估雨精度的不确定性受到当地降雨类型和像元内降雨非均匀性影响,而结合这两个关键因素开展半干旱草原卫星估雨的研究有限.2009年夏,我们在中国锡林郭勒半干旱草原用多部微雨雷达和雨量计构建了9 km卫星像元降雨观测网,观测了像元内降雨非均匀性(空间变异系数CV),并评估了卫星估雨精度.结果表明:(1)CV值受像元内平均降雨量,降雨类型,降雨云面积及移向等影响,如高Cv值的降雨过程大多为平均降雨量小,对流性降雨过程,降雨云边缘像元CV值较高;(2)TRMM 3B42V7卫星估雨产品适用性较好,CMORPH和PERSIANN次之,但TRMM 3B42V7易在半干旱草原湖泊处高估降雨.     

Carbon costs and benefits of France’s biomass energy production targets

Background

Concern about climate change has motivated France to reduce its reliance on fossil fuel by setting targets for increased biomass-based renewable energy production. This study quantifies the carbon costs and benefits for the French forestry sector in meeting these targets. A forest growth and harvest simulator was developed for French forests using recent forest inventory data, and the wood-use chain was reconstructed from national wood product statistics. We then projected wood production, bioenergy production, and carbon balance for three realistic intensification scenarios and a business-as-usual scenario. These intensification scenarios targeted either overstocked, harvest-delayed or currently actively managed stands.

Results

All three intensification strategies produced 11.6–12.4 million tonnes of oil equivalent per year of wood-based energy by 2026, which corresponds to the target assigned to French wood-energy to meet the EU 2020 renewable energy target. Sustaining this level past 2026 will be challenging, let alone further increasing it. Although energy production targets can be reached, the management intensification required will degrade the near-term carbon balance of the forestry sector, compared to continuing present-day management. Even for the best-performing intensification strategy, i.e., reducing the harvest diameter of actively managed stands, the carbon benefits would only become apparent after 2040. The carbon balance of a strategy putting abandoned forests back into production would only break even by 2055; the carbon balance from increasing thinning in managed but untended stands would not break even within the studied time periods, i.e. 2015–2045 and 2046–2100. Owing to the temporal dynamics in the components of the carbon balance, i.e., the biomass stock in the forest, the carbon stock in wood products, and substitution benefits, the merit order of the examined strategies varies over time.

Conclusions

No single solution was found to improve the carbon balance of the forestry sector by 2040 in a way that also met energy targets. We therefore searched for the intensification scenario that produces energy at the lowest carbon cost. Reducing rotation time of actively managed stands is slightly more efficient than targeting harvest-delayed stands, but in both cases, each unit of energy produced has a carbon cost that only turns into a benefit between 2060 and 2080.

     

Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area: A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaská near Banská Bystrica in Slovakia. The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material. Its maximum thickness is 3 m. Another specificific condition of the study area is its location in the built-up area, due to which the applicability of geophysical methods was limited. The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill, which complicates the identification of cave spaces. The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.     

Upwelling of Deep-seated Fluid in the Sikhote-Alin Region,Far East of the Eurasian Plate

Aquatic Geochemistry - Spring waters with high-pCO2 content are widely distributed in the Sikhote-Alin region in Russia. Mukhen spa is one such spring located in the northern Sikhote-Alin region....     

Impact of different sampling rates on precise point positioning performance using online processing service

In this study, the effect of different sampling rates (i.e. observation recording interval) on the Precise Point Positioning (PPP) solutions in terms of accurac...     

A case study of sewage discharge in the shallow coastal area of the Northern Adriatic Sea (Gulf of Trieste)

A case study was carried out in 2000 in the shallow coastal area of the Northern Adriatic Sea (Gulf of Trieste) where untreated domestic sewage and industrial wastes are discharged at rate of 5500 m³·day^?1. The sewage plume above the outfall was followed using faecal coliforms (FC) and overturning length scale (l_T). The latter was rejected as a marker as the discharge conditions prohibit following the turbulence of sewage water. Intermittent sewage discharge is reflected in the minimal effect of eutrophication. Increase of phytoplankton biomass is thus only minor compared with the unpolluted area regardless of elevated concentrations of sewage‐derived nutrients (confirmed by correlation coefficients between FC and NH₄⁺, TP, PO₄^3?: 0.78, 0.71 and 0.67, respectively). Deteriorated trophic status, determined by the TRIX index, was observed only in the surface layer (average TRIX: 5.67). High FC content well above the regulation limit (up to 2.6 × 10⁵ FC·100 ml^?1) represents, therefore, the major negative impact of the improperly treated waste for the risk to human health.     

Evidence for the 8,200 a <Emphasis Type="SmallCaps">b</Emphasis>.<Emphasis Type="SmallCaps">p</Emphasis>. cooling event in the middle Okinawa Trough

Based on new and existing data on oxygen isotopes, alkenone-surface seawater temperature trends, planktonic foraminifers, lithology, and clay mineral composition of piston cores, a distinct cooling event has been identified around 8,200 cal a b.p. in the middle Okinawa Trough, northwest Pacific. This corresponds to the 8,200 a b.p. cooling event recorded in many places of the Northern Hemisphere. During this event, the local temperature decreased by 1°C, and the δ¹⁸O value increased by 0.6‰. A strengthened Asian winter monsoon is the most probable cause for this event, which thus adds further credibility to the contention that we are dealing here with a global phenomenon.