A new approach for predicting the extreme response of structures

In this article a method to estimate the mean upcrossing intensity, μ(u), of a stochastic process is proposed. It is assumed that the stochastic process is a sum of a Gaussian process and a second-order correction term. The method is based on the two-dimensional Saddlepoint approximation. The accuracy of the method is tested on processes having analytical solutions for μ(u). Numerical examples are given where the stochastic process represents (i) the horizontal response of a floating offshore structure in a Gaussian sea, and (ii) the response of a structure subjected to a Gaussian wind velocity process. In addition, the estimates are compared to empirical upcrossing intensities of simulated responses. For case (ii), the obtained μ(u) estimates are compared to estimates obtained by numerical integration.     

Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Summer distribution and geochemical composition of suspended-particulate matter in the east china sea

The distribution and geochemical composition of suspended-particulate matter (SPM) in the East China Sea (ECS) were investigated during the summer period of high continental runoff to elucidate SPM sources, distribution and cross-shelf transport. The spatial variability of SPM distribution (0.3–6.5 mg l⁻¹) and geochemical composition (POC, Al, Si, Fe, Mn, Ca, Mg and K) in the ECS was pronounced during summer when the continental fluxes of freshwater and terrestrial materials were highest during the year. Under the influences of Changjiang runoff, Kuroshio intrusion, surface production and bottom resuspension, the distribution generally showed strong gradients decreasing seaward for both biogenic and lithogenic materials. Particulate organic carbon was enriched in surface water (mean ∼18%) due to the influence of biological productivity, and was diluted by resuspended and/or laterally-transported materials in bottom water (mean 9.4%). The abundance of lithogenic elements (Al, Si, Fe, Mn) increased toward the bottom, and the distribution correlations were highly significant. Particulate CaCO₃ distribution provided evidence that the SPM of the bottom water in the northern part of the study area was likely mixed with sediments originally derived from Huanghe. A distinct benthic nepheloid layer (BNL) was present in all seaward transects of the ECS shelf. Sediment resuspension may be caused by tidal fluctuation and other forcing and be regarded as the principal agent in the formation of BNL. This BNL was likely responsible for the transport of biogenic and lithogenic particles across or along the ECS shelf. Total inventories of SPM, POC and PN are 46, 2.8 and 0.4 Tg, respectively, measured over the total area of 0.45 × 10⁶ km² of the ECS shelf. Their mean residence times are about 27, 13 and 11 days, respectively. The inventory of SPM in the water column was higher in the northernmost and southernmost transects and lower in the middle transects, reflecting the influences of terrestrial inputs from Changjiang and/or resuspended materials from Huanghe deposits in the north and perhaps from Minjiang and/or Taiwan’s rivers in the south. The distribution and transport patterns of SPM and geochemical elements strongly indicate that continental sources and cross-shelf transport modulate ECS particulate matter in summer.     

Inertial and hydrodynamic inertial loads on floating units

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.     

Food Preferences of Dominant Salt Marsh Herbivores and Detritivores

Abstract. Food preferences of six dominant salt marsh invertebrates were studied to identify detritivores and to assess differences in their diets. Animals fed on agar suspensions of dead and live foods in petri dishes with four compartments. Only two foods were included in each dish. Relative palatability was assessed by measuring the amount of suspension removed or by counting the number of feeding marks left on the surface of the suspensions.
Feeding marks reflected differences in mouth parts and feeding mechanisms of the six invertebrates. Melampus bidentatus, Orchestia grillus , and Philoscia vittata preferred dead litter over live tissues of marsh graminoids, blue-green algae, and sulfur bacteria. No preference for detritus from different graminoids was shown by M. bidentatus. Orchestia grillus fed preferentially on Spartina patens detritus. Philoscia vittata preferred detritus from S. alterniflora and S. patens. Blue-green algae and sulfur bacteria were preferred over detritus by Littorina saxatalis , but detritus was preferred over live graminoids. Littorina saxatalis fed preferentially on Juncus gerardi detritus. Blue-green algae, sulfur bacteria, and live graminoids were preferred over detritus by L. littorea. Talorchestia longicornis also preferred blue-green algae.
On the basis of their food preferences, Littorina saxatalis, Melampus bidentatus, Orchestia grillus , and Philoscia vittata were classified as detritivores. Feeding on detritus from different plant species could result in a partitioning of this food resource in the detritus-based food chains of the salt marsh ecosystem.     

Co–rich Mn crusts from the Magellan Seamount cluster: the long journey through time

The Magellan seamounts began forming as large submarine shield volcanoes south of the equator during the Cretaceous. These volcanoes formed as a cluster on the small Pacific plate in a period when tectonic stress was absent. Thermal subsidence of the seafloor led to sinking of these volcanoes and the formation of guyots as the seamounts crossed the equatorial South Pacific (10–0°S) sequentially and ocean surface temperatures became too high for calcareous organisms to survive. Guyot formation was completed between about 59 and 45 Ma and the guyots became phosphatized at about 39–34 and 27–21 Ma. Ferromanganese crusts began formation as proto-crusts on the seamounts and guyots of the Magellan Seamount cluster towards the end of the Cretaceous up to 55 Ma after the formation of the seamounts themselves. The chemical composition of these crusts evolved over time in a series of steps in response to changes in global climate and ocean circulation. The great thickness of these crusts (up to 15–20 cm) reflects their very long period of growth. The high Co contents of the outer parts of the crusts are a consequence of the increasing deep circulation of the ocean and the resulting deepening of the oxygen minimum zone with time. Growth of the Co-rich Mn crusts in the Magellan Seamount cluster can be considered to be the culmination of a long journey through time.     

Estimating the geostrophic velocity obtained by HF radar observations in the upstream area of the Kuroshio

A method to extract geostrophic current in the daily mean HF radar data in the Kuroshio upstream region is established by comparison with geostrophic velocity determined from the along-track altimetry data. The estimated Ekman current in the HF velocity is 1.2% (1.5%) and 48° (38°)-clockwise rotated with respect to the daily mean wind in (outside) the Kuroshio. Furthermore, additional temporal smoothing is found necessary to remove residual ageostrophic currents such as the inertial oscillation. After removal of the ageostrophic components, the HF geostrophic velocity agrees well with that from the altimetry data with rms difference 0.14 (0.12) m/s in (outside) the Kuroshio.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.