Vulnerabilities of macrophytes distribution due to climate change

Theoretical and Applied Climatology - The rise in the earth’s surface and water temperature is part of the effect of climatic change that has been observed for the last decade. The rates of...     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

SPATIAL VARIATION OF Zn GEOCHEMICAL FRACTIONS IN THE SURFACE SEDIMENTS OF THE STRAITS OF MALACCA: NATURAL OR ANTHROPOGENIC?

1INTRODUCTION Studiesonheavymetalcontaminationinsedi mentshavealwaysbeenfocusedonthecoastalandin tertidalareas(Sivalingam,etal.,1980;Ismail,1993;Ismail,etal.,1993;IsmailandRosniza,1997;Yap,etal.,2002a,2002b).Theheavymet alconcentrationsfoundinthesediments…     

Are carbonate barrier islands mobile? Insights from a mid to late-Holocene system,Al Ruwais,northern Qatar

Barrier islands are important landforms in many coastal systems around the globe. Studies of modern barrier island systems are mostly limited to those of siliciclastic realms, where the islands are recognized as mobile features that form on transgressive coastlines and migrate landward as sea-level rises. Barrier islands of the ‘Great Pearl Bank’ along the United Arab Emirates coast are the best-known carbonate examples. These Holocene islands, however, are interpreted to be anchored by older deposits and immobile. The mid-Holocene to late-Holocene depositional system at Al Ruwais, northern Qatar, provides an example of a mobile carbonate barrier island system, perhaps more similar to siliciclastic equivalents. Sedimentological and petrographic analyses, as well as ¹⁴C-dating of shells and biogenic remains from vibracored sediments and surface deposits, show that after 7000 years ago a barrier system with a narrow back-barrier lagoon formed along what is now an exposed coastal zone, while, contemporaneously, a laterally-extensive coral reef was forming immediately offshore. After 1400 years ago the barrier system was forced to step ca 3 km seaward in response to a sea-level fall of less than 2 m, where it re-established itself directly on the mid-Holocene reef. Since that time, the barrier has retreated landward as much as 1000 m to its current position, exposing previously-deposited back-barrier lagoonal sediment at the open-coast shoreline. In modern neritic warm-water carbonate settings mobile barrier island systems are rare. Their construction and migration may be inhibited by reef formation, early cementation, and the relative inefficiency of sourcing beach sediments from open carbonate shelves. Carbonate barrier island systems likely formed more commonly during geological periods when ramps and unrimmed shelves predominated and in calcite seas, when meteoric cementation was minimized as a result of initial calcitic allochem mineralogy. As with their siliciclastic analogues, however, recognition of the influence of these transient landforms in the rock record is challenging.     

An indicator based approach for assessing household’s perceptions of landslide risk in Murree hills of Pakistan

Natural Hazards - The Murree region in Pakistan is frequently affected by landslides and causes damages to lands, houses, life lines and even loss of livestock and human life. We have attempted in...     

Highways protection from flood hazards,a case study: New Tama road,KSA

Natural Hazards - Highways in arid regions are highly exposed to damage by floods. This requires intensive analysis of flood quantity, time and direction that can be used to design the suitable...     

Ore deposits and epithermal evidences associated with intra-magmatic faults at Aïn El Araâr-Oued Belif ring structure (NW of Tunisia)

International Journal of Earth Sciences - Hydrothermal ore deposits at Aïn El Araâr-Oued Belif location are classified as epithermal deposits type. The ore bodies are hosted by upper...     

The Pushtashan juvenile suprasubduction zone assemblage of Kurdistan (northeastern Iraq): A Cretaceous (Cenomanian) Neo-Tethys missing link

The Pushtashan suprasubduction zone assemblage of volcanic rocks, gabbros, norites and peridotites occurs in the Zagros suture zone, Kurdistan region, northeastern Iraq. Volcanic rocks are dominant in the assemblage and consist mainly of basalt and basaltic andesite flows with interlayered red shale and limestone horizons. Earlier lavas tend to be MORB-like, whereas later lavas display island arc tholeiite to boninitic geochemical characteristics. Tholeiitic gabbros intrude the norites and display fractionation trends typical of crystallisation under low-pressure conditions, whereas the norites display calc-alkaline traits, suggesting their source included mantle metasomatised by fluids released from subducted oceanic crust. Enrichment of Rb, Ba, Sr, Th and the presence of negative Nb anomalies indicate generation in a suprasubduction zone setting. Trondhjemite and granodiorite intrusions are present in the volcanic rocks, gabbros and norites. SHRIMP U-Pb dating of magmatic zircons from a granodiorite yields a mean~(206)Pb/~(238)U age of 96.0 ±2.0 Ma(Cenomanian). The initial ε_(Hf) value for the zircons show a narrow range from +12.8 to+15.6, with a weighted mean of + 13.90±0.96. This initial value is within error of model depleted mantle at 96 Ma or slightly below that, in the field of arc rocks with minimal contamination by older continental crust. The compositional bimodality of the Pushtashan suprasubduction sequence suggests seafloor spreading during the initiation of subduction, with a lava stratigraphy from earlyerupted MORB transitioning into calc-alkaline lavas and finally by 96 Ma intrusion of granodioritic and trondhjemitic bodies with juvenile crustal isotopic signatures. The results confirm another Cretaceous arc remnant preserved as an allochthon within the Iraqi segment of the Cenozoic Zagros suture zone. Implications for the closure of Neo-Tethys are discussed.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

Occurrence of jarosite within Quaternary coastal sabkha sediments in Kuwait,Arabian Gulf

X-ray diffractometer analysis and SEM investigation confirmed the occurrence of jarosite and alunogen minerals in the Quaternary siliciclastic sabkha sediments of northern Kuwait within the Bahrah oilfield area, Arabian Gulf. Jarosite is relatively abundant in a near-surface whitish sticky tidal muddy sand layer about 60 cm thick that overlies the ferruginous sandstone of the Oligo-Miocene Ghar Formation. Jarosite occurs as clusters of euhedral pseudo-cubes of about 1 μm in size and as agglomerated nanoglobules of 250 nm in size. A hypogenetic origin related to the reaction of sulfuric acid produced by the oxidation of H₂S associated with hydrocarbon gas seepages with K and Fe leachates is suggested. The restricted occurrence of jarosite within near-surface sabkha sediments may be attributed to limited tidal inundation and prevalence of arid climatic conditions.