Diagnosing southeast tropical Atlantic SST and ocean circulation biases in the CMIP5 ensemble

Warm sea-surface temperature (SST) biases in the southeastern tropical Atlantic (SETA), which is defined by a region from 5°E to the west coast of southern Africa and from 10°S to 30°S, are a common problem in many current and previous generation climate models. The Coupled Model Intercomparison Project Phase 5 (CMIP5) ensemble provides a useful framework to tackle the complex issues concerning causes of the SST bias. In this study, we tested a number of previously proposed mechanisms responsible for the SETA SST bias and found the following results. First, the multi-model ensemble mean shows a positive shortwave radiation bias of ~20 W m^?2, consistent with models’ deficiency in simulating low-level clouds. This shortwave radiation error, however, is overwhelmed by larger errors in the simulated surface turbulent heat and longwave radiation fluxes, resulting in excessive heat loss from the ocean. The result holds for atmosphere-only model simulations from the same multi-model ensemble, where the effect of SST biases on surface heat fluxes is removed, and is not sensitive to whether the analysis region is chosen to coincide with the maximum warm SST bias along the coast or with the main SETA stratocumulus deck away from the coast. This combined with the fact that there is no statistically significant relationship between simulated SST biases and surface heat flux biases among CMIP5 models suggests that the shortwave radiation bias caused by poorly simulated low-level clouds is not the leading cause of the warm SST bias. Second, the majority of CMIP5 models underestimate upwelling strength along the Benguela coast, which is linked to the unrealistically weak alongshore wind stress simulated by the models. However, a correlation analysis between the model simulated vertical velocities and SST biases does not reveal a statistically significant relationship between the two, suggesting that the deficient coastal upwelling in the models is not simply related to the warm SST bias via vertical heat advection. Third, SETA SST biases in CMIP5 models are correlated with surface and subsurface ocean temperature biases in the equatorial region, suggesting that the equatorial temperature bias remotely contributes to the SETA SST bias. Finally, we found that all CMIP5 models simulate a southward displaced Angola–Benguela front (ABF), which in many models is more than 10° south of its observed location. Furthermore, SETA SST biases are most significantly correlated with ABF latitude, which suggests that the inability of CMIP5 models to accurately simulate the ABF is a leading cause of the SETA SST bias. This is supported by simulations with the oceanic component of one of the CMIP5 models, which is forced with observationally derived surface fluxes. The results show that even with the observationally derived surface atmospheric forcing, the ocean model generates a significant warm SST bias near the ABF, underlining the important role of ocean dynamics in SETA SST bias problem. Further model simulations were conducted to address the impact of the SETA SST biases. The results indicate a significant remote influence of the SETA SST bias on global model simulations of tropical climate, underscoring the importance and urgency to reduce the SETA SST bias in global climate models.     

Equatorial Atlantic variability and its relation to mean state biases in CMIP5

Coupled general circulation model (GCM) simulations participating in the Coupled Model Intercomparison Project Phase 5 (CMIP5) are analyzed with respect to their performance in the equatorial Atlantic. In terms of the mean state, 29 out of 33 models examined continue to suffer from serious biases including an annual mean zonal equatorial SST gradient whose sign is opposite to observations. Westerly surface wind biases in boreal spring play an important role in the reversed SST gradient by deepening the thermocline in the eastern equatorial Atlantic and thus reducing upwelling efficiency and SST cooling in the following months. Both magnitude and seasonal evolution of the biases are very similar to what was found previously for CMIP3 models, indicating that improvements have only been modest. The weaker than observed equatorial easterlies are also simulated by atmospheric GCMs forced with observed SST. They are related to both continental convection and the latitudinal position of the intertropical convergence zone (ITCZ). Particularly the latter has a strong influence on equatorial zonal winds in both the seasonal cycle and interannual variability. The dependence of equatorial easterlies on ITCZ latitude shows a marked asymmetry. From the equator to 15°N, the equatorial easterlies intensify approximately linearly with ITCZ latitude. When the ITCZ is south of the equator, on the other hand, the equatorial easterlies are uniformly weak. Despite serious mean state biases, several models are able to capture some aspects of the equatorial mode of interannual SST variability, including amplitude, pattern, phase locking to boreal summer, and duration of events. The latitudinal position of the boreal spring ITCZ, through its influence on equatorial surface winds, appears to play an important role in initiating warm events.     

MediaPark cologne: A large high tech project to develop Cologne's inner city

All over the world the development in microelectronics and the internationalisation of communications and media production and transmission leads to financial and technological merges: computer and communication and information industries move closer together and give birth to new products, services and organisations. In Cologne, on a large inner city site of 200.000 m² near the Rhine, the Cathedral, Broadcasting Centres and the Central Business District, an innovative development project is under way to promote the further growth and acceptance of new technics and new media production. MediaPark is designed as a centre for activities in microelectronics, arts presentation and production, and centres for professional architectural competition for the design and structure of the planned land use has just started.     

The thermal springs of Jordan

The thermal springs alongside Wadi Araba, Dead Sea and Jordan valley, Jordan, were investigated and sampled in a comprehensive field study of 2 weeks. Conventional physicochemical properties were measured in situ; dissolved solids and isotopic composition were analyzed. Two main spring locations on the east side of the Dead Sea were mapped. It became evident, that the hottest springs are among the closest to prominent faults; some springs are controlled by gas lift. Jordan’s hot springs are described by means of a broad hydrochemical and physicochemical data set and several figures are presented. Based on their hydrochemistry, the thermal springs are classified into four thermal provinces. Water genesis is discussed. Several geothermometers are applied to estimate reservoir temperatures. Observed discharge rate, water temperature and isotopic composition are compared with data from the literature. Although discharge and water temperature are reported to be constant over the last decades, groundwater overexploitation led to a shift of the isotopic composition, what is documented for the first time in Jordan. Thus, the effect of groundwater mining on Jordan’s hot springs can be stated as a fact.     

Impact of the 2010 tsunami on an endangered insular soil–plant system

Natural catastrophes could damage island biodiversity and ecosystems, and their effects could become devastating if combined with human disturbances. In this study, we determined the effects of the tsunami occurred in Robinson Crusoe Island (Chile) on 27 February 2010 on an endangered soil–plant system. Using data of endemic Cabbage Trees (Dendroseris litoralis Skottsb.) and soil attributes taken before and after the 2010 event, we developed thematic maps to assess the changes in population size and soil substrate of Cabbage Trees caused by the tsunami. We determined that from 153 pre-tsunami (2009) standing Cabbage Trees, only 66 (43 %) survived in 2011, mostly in elevations above 25 m a.s.l. Before the tsunami, 86 (56 %) of Cabbage Trees were established in humus-rich soil sites whereas after the tsunami, this number declined to 53 (35 %). These results represent the first report of a severe population decline after a tsunami and indicate that tsunamis are an important source of species extinction in small oceanic islands not only by reducing the population size but also by reducing the quality of sites for plant growth.     

Noble gases in the Xinjiang (Armanty) iron meteorite––A big object with a short cosmic‐ray exposure age

Abstract– We measured the concentrations and isotopic ratios of the cosmogenic noble gases He, Ne, and Ar in the very large iron meteorite Xinjiang (IIIE). The ³He and ⁴He data indicate that a significant portion of the cosmogenic produced helium has been lost via diffusion or in a recent impact event. High ²²Ne/²¹Ne ratios indicate that contributions to the cosmogenic ²¹Ne from sulfur and/or phosphorous are significant. By combining the measured nuclide concentrations with model calculations for iron meteorites we were able to determine the preatmospheric diameter of Xinjiang to 260–320 cm, which corresponds to a total mass of about 70–135 tons. The cosmic‐ray exposure age of Xinjiang is 62 ± 16 Ma, i.e., relatively short compared to most of the other iron meteorites. With the current database we cannot firmly determine whether Xinjiang experienced a complex irradiation history. The finding of ³He and ⁴He losses might argue for a recent impact event and therefore for a complex exposure.     

Cross sections from 5 to 35 MeV for the reactions natMg(3He,x)26Al, 27Al(3He,x)26Al,natCa(3He,x)41Ca,and natCa(3He,x)36Cl: Implications for early irradiation in the solar system

Abstract– Cross sections were measured for the nuclear reactions ^natMg(³He,x)²⁶Al, ²⁷Al(³He,x)²⁶Al, ^natCa(³He,x)⁴¹Ca, and ^natCa(³He,x)³⁶Cl in the energy region from approximately 5–35 MeV. The rates of these reactions are important for studies of early solar system irradiation scenarios. The ²⁶Al, ³⁶Cl, and ⁴¹Ca were separated chemically, and the numbers of atoms produced in each reaction channel were measured using accelerator mass spectrometry (AMS). From these results, 26 cross sections were determined and compared with predictions of the TALYS code. Agreement is within 40% for most cross sections. Our measurements were used to model the production of ⁷Be, ¹⁰Be, ²⁶Al, and ⁴¹Ca in the early solar system. For projectiles ¹H, ³He, and ⁴He, we assumed energy spectra of the general form E^?α. For a wide range of parameterizations, the modeled ratios of ⁷Be/Be and ¹⁰Be/Be on the one hand and of ²⁶Al/²⁷Al and ⁴¹Ca/Ca on the other are coupled because the excitation functions for the relevant nuclear reactions have similar shapes. Modeling of a closed system with the constraint that ¹⁰Be/⁹Be = 0.001 fails to reproduce simultaneously the range of ⁷Be/⁹Be, ²⁶Al/²⁷Al, and ⁴¹Ca/Ca ratios inferred for the early solar system from studies of meteorites.     

Silicon in iron meteorite metal

Abstract– We report Si concentrations in the metal phases of iron meteorites. Analyses were performed by secondary ion mass spectrometry using a CAMECA 1270 ion probe. The Si concentrations are low (0.09–0.46 μg g^?1), with no apparent difference in concentration between magmatic and nonmagmatic iron meteorites. Coexisting kamacite and Ni‐rich metal phases have similar Si contents. Thermodynamic calculations show that Fe,Ni‐metal in equilibrium with silicate melts at temperatures where metal crystallizes should contain approximately 100 times more Si than found in iron meteorites in this work. The missing Si may either occur as tiny silicate inclusions in metal or it may have diffused as Si‐metal into surrounding silicates at low temperatures. In both cases, extensive low‐temperature diffusion of Si in metal is required. It is therefore concluded that low Si in iron meteorites is a result of subsolidus reactions during slow cooling.     

中资企业研发国际化研究——基于华为WIPO专利分析

近年来,中资企业的研发国际化倾向日益明显,海外专利申请数量激增。中资跨国公司的海外R&D中心区位与空间组织结构,以及对企业创新能力提升的影响成为国内外经济地理学研究的热点问题之一。以深圳华为技术有限公司为案例,基于世界知识产权组织专利数据与企业访谈资料,分析了华为研发国际化的途径和成效。研究发现：华为通过在全球卓越中心建立海外R&D中心以及与国际一流企业、大学与科研机构的跨境合作获得领先的研发资源,并通过总部协调实现知识由海外卓越中心向中国的流动。这种主动技术获取途径既保障华为获得全球领先的技术资源,又保障了知识商业化的成果归华为所有,是华为成长为全球领先企业的主要途径。     

Inversion of Scholte wave dispersion and waveform modeling for shallow structure of the Ninetyeast Ridge

The construction of S-wave velocity models of marine sediments down to hundreds of meters below the seafloor is important in a number of disciplines. One of the most significant trends in marine geophysics is to use interface waves to estimate shallow shear velocities which play an important role in determining the shallow crustal structure. In marine settings, the waves trapped near the fluid–solid interface are called Scholte waves, and this is the subject of the study. In 1998, there were experiments on the Ninetyeast Ridge (Central Indian Ocean) to study the shallow seismic structure at the drilled site. The data were acquired by both ocean bottom seismometer and ocean bottom hydrophone. A new type of seafloor implosion sources has been used in this experiment, which successfully excited fast and high frequency (>500 Hz) body waves and slow, intermediate frequency (<20 Hz) Scholte waves. The fundamental and first higher mode Scholte waves have both been excited by the implosion source. Here, the Scholte waves are investigated with a full waveform modeling and a group velocity inversion approach. Shear wave velocities for the uppermost layers of the region are inferred and results from the different methods are compared. We find that the full waveform modeling is important to understand the intrinsic attenuation of the Scholte waves between 1 and 20 Hz. The modeling shows that the S-wave velocity varies from 195 to 350 m/s in the first 16 m of the uppermost layer. Depths levels of high S-wave impedance contrasts compare well to the layer depth derived from a P-wave analysis as well as from drilling data. As expected, the P- to S-wave velocity ratio is very high in the uppermost 16 m of the seafloor and the Poisson ratio is nearly 0.5. Depth levels of high S-wave impedance contrasts are comparable to the layer depth derived from drilling data.