Thermal equation of state of majorite with MORB composition

In situ synchrotron X-ray diffraction experiments were conducted using the SPEED-1500 multi-anvil press at SPring-8 on majoritic garnet synthesized from natural mid-ocean ridge basalt (MORB), whose chemical composition is close to the average of oceanic crust, at 19 GPa and 2200 K. Pressure-volume-temperature data were collected using a newly developed high-pressure cell assembly to 21 GPa and 1273 K. Data were fit to the high-temperature Birch-Murnaghan equation of state, with fixed values for the ambient cell volume (V₀ = 1574.14(4) Å³) and the pressure derivative of the isothermal bulk modulus (K^′T = 4). This yielded an isothermal bulk modulus of K_T0 = 173(1) GPa, a temperature derivative of the bulk modulus (∂K_T/∂T)_P = −0.022(5) GPa K⁻¹, and a volumetric coefficient of thermal expansivity α = a + bT with values of a = 2.0(3) × 10⁻⁵ K⁻¹ and b = 1.0(5) × 10⁻⁸ K⁻². The derived thermoelastic parameters are very similar to those of pyrope. The density of subducted oceanic crust compared to pyrolitic mantle at the conditions in Earth's transition zone (410-660 km depth) was calculated using these results and previously reported thermoelastic parameters for MORB and pyrolite mineral assembledges. These calculations show that oceanic crust is denser than pyrolitic mantle throughout the mantle transition zone along a normal geotherm, and the density difference is insensitive to temperature at the pressures in lower part of the transition zone.     

Effect of stirring on crystallization kinetics of basalt: texture and element partitioning

Isothermal crystallization experiments on basalt have been carried out using an infrared heating furnace to investigate the effect of stirring. When stirring was not applied (static experiment), the results agreed well with previous experiments. But when stirring was applied and a flow of Reynolds number=10^–3–4 was present (dynamic experiment), considerably different results were obtained, especially in respect to the nucleation rate and the morphology of crystals. At T=25° C essentially similar results were obtained on the nucleation rates and morphologies of crystals in both static and dynamic experiments. However, at supercoolings larger than 45° C, nucleation density increased drastically in dynamic experiments reaching up to ten times as large as that in static experiments. Crystals of plagioclase and clinopyroxene were small and adapted acicular morphology regardless of T in dynamic experiments, and hyalopilitic textures were formed. A TTT-diagram shows that the nucleation incubation time is shorter in dynamic experiments than in static experiments. No compositional difference in major elements was found in plagioclase and clinopyroxene produced in both static and dynamic experiments. However, minor element concentrations, e.g., Mg in plagioclase and Ti, Al in clinopyroxene, were found to increase with both T and flow velocity. All these results imply that although chemical diffusion in the melts did not play an important role in the dynamic experiments, interface kinetics were important. It is suggested that hyalopilitic texture commonly seen in natural basalt is mainly due to flow in magma.     

Status of butyltin pollution along the coasts of western Japan in 2001, 11 years after partial restrictions on the usage of tributyltin

Restrictions on the use of tributyltin (TBT) in aquaculture and on boats in coastal regions, except for ocean-going vessels, have been in place in Japan since 1990 due to the strong toxic effects of TBT on marine organisms. However, TBT pollution along the Japanese coasts has been reported after this legislation was enacted. In order to elucidate the present status of contamination by butyltin (BT) compounds, we measured the levels of BTs [monobutyltin (MBT), dibutyltin (DBT) and TBT] in seawater and Caprella spp. samples obtained from the western part of Seto Inland Sea, Uwa Sea and Uranouchi Bay in western Japan during March to September, 2001. Butyltins were detected in more than 90% of the seawater samples (n = 59), with average concentrations of 8.2 ± 9.2 (SD) ng MBT L⁻¹, 3.3 ± 3.0 ng DBT L⁻¹ and 9.0 ± 7.0 ng TBT L⁻¹. Among 41 stations situated on coastal lines, a sufficient number of Caprella organisms for chemical analysis could be collected from only 16 stations. The butyltin concentrations in seawater and Caprella samples from Uwa Sea and Uranouchi Bay, in which the dominant industry in both waters is aquaculture, showed significantly higher than or no significant differences from those samples from the western part of Seto Inland Sea, a major heavy-industry area in Japan. As the TBT concentration in seawater increased, the number of Caprella organisms collected decreased. The mean TBT concentration among the seawater samples was above the estimated lowest observable effect concentration (LOEC) that reduces the survival rate of Caprella danilevskii. Thus, the present study indicates that TBT is still a potential ecological hazard to the survival of marine invertebrates inhabiting coasts along western Japan, even 11 years after the partial ban on TBT usage was implemented.     

40Ar/39Ar dating on volcanic rocks of the Deccan Traps,India

⁴⁰Ar/³⁹Ar dating results on seven volcanic rocks from four areas of the Deccan Traps, India, suggest that volcanic activity more than 70 Ma ago might have occurred at least in limited areas.In the Igat Puri area, the uppermost flow shows an⁴⁰Ar/³⁹Ar age of 63 Ma, whereas a lower flow has an age of around 82–84 Ma.⁴⁰Ar/³⁹Ar ages of samples from the Bombay area also seem to favor the occurrence of volcanic activity more than 70 Ma ago. One rhyolite dyke from the Osam Hill in the Girnar Hill area shows a well-defined plateau age of 68 Ma, whereas two tholeiitic basalts from the Mahabaleshwar area indicate a total⁴⁰Ar/³⁹Ar age of around 63–64 Ma, though they show the effect of secondary disturbance in the age spectra.The volcanic activity(ies) more than 70 Ma ago may correspond to precursory one(s) for the main volcanic activity around 65 Ma ago in the Deccan Traps.     

Surface microtopography of metamorphic white micas

Gold decoration and platinum-carbon-shadowing techniques of electron microscopy have been applied to study the surface microtopographs of noncleavage (001) faces of porphyroblastic white micas and sericite crystals collected from the chlorite, biotite, and garnet zones in the Shiragayama area in the Sanbagawa metamorphic terrain, Shikoku, Japan. Two different types of surface microtopograph have been observed; parallel step system and saw-tooth step system. The former is interpreted as representing the surface microtopographs formed either by growth or under near equilibrium conditions, the latter either by dissolution or under rigorous kinetic conditions. The former has been observed on porphyroblastic white micas occurring in the middle portion of each metamorphic zone and on all sericite crystals, the latter on most sericites and on porphyroblastic white micas occurring along the boundaries of the neighboring metamorphic zones. It is suggested that the observed variations in the surface microtopographic characteristics are due to Ostwald ripening during a kind of sintering process in which interstitial water plays an essential role, and that the drastic changes along the metamorphic zone boundaries are due to dehydration reactions. Retrogressive metamorphism is considered to have an almost negligible effect, if any, upon the surface microtopographs.     

A method for the near-source anisotropy by the pair-event inversion of Rayleigh-wave radiation patterns

Summary. A novel method is proposed for retrieving the 3-D orientation of axes of symmetry of near-source anisotropy by a non-linear inversion of observed radiation patterns of seismic displacement spectra of Rayleigh waves.
If faulting is generated within an anisotropic source region, body force equivalents for the faulting are in general not a double couple but the sum of three orthogonal dipole forces (Kosevich; Kawasaki & Tanimoto). As a result of the third dipole force, radiation patterns of Rayleigh waves are deformed, the deformation amounting to several per cent of those for an isotropic source medium. The non-linear inversion is carried out to find the optimum fault plane solutions giving the minimum square residual between observed and theoretical radiation patterns in some period range. In order to remove effects of heterogeneity along propagation paths, a pair-event scheme is involved in the inversion, which denotes taking spectral amplitude ratios and differential phases of the seismic displacement spectra of the pair-events having close hypocentres and different fault plane solutions. The uniqueness of the fault plane solutions of the non-linear inversion is afforded a proof by the Monte-Carlo experiment.
The non-linear inversion is repeated for some possible types of symmetry of the near-source orthotropic anisotropy due to the preferred orientation of olivine crystals as mantle materials. Square residuals thus obtained are compared with each other to see which orientation gives the minimum.
The method is applied to pair-events which occurred in the anomalous mantle beneath the Mid-Atlantic Ridge. This leads to a discovery that one type of symmetry of the preferred orientations with a -, b - and c-axes aligned vertical, parallel to and perpendicular to the trend (N11E) of the ridge axis, respectively, is most likely existing in the anomalous mantle.     

A model for mixing basaltic and dacitic magmas as deduced from experimental data

It has been demonstrated experimentally that basaltic and dacitic magmas can be easily mixed to form both banded dacite and homogeneous andesite in less than a few hours. The presence of phenocrysts larger than 0.5 mm increased considerably the efficiency of mixing. Flow patterns in the experimental system were visualized using Pt spheres, which indicated that convection occurs in basalt melt, but not in dacite melt. The Reynolds numbers of the basaltic and dacitic melts in the experimental system were calculated to be about 10^–3 and 10^–6, respectively. Mixing proceeds initially by mechanical mixing of the two magmas in a large scale, but later by coupling interfacial convection and mutual diffusion. Thus, depending on the depth where vesiculation and following disruption of the magma occurs, banded pumice, homogeneous pumice and homogeneous andesite lava are erupted. The observed textures of mixed rocks of Plinian type eruption and the limiting occurrence of banded pumice are satisfactorily accounted for on this model.     

Analysis of dust events in 2008 and 2009 using the lidar network, surface observations and the CFORS model

The Asian dust events in 2008 (May 24–June 4 in 2008) and in 2009 (March 12–25, October 13–26, and December 15–28 in 2009) were analyzed with the lidar network observations, surface observations in China, Korea, Japan, and Mongolia, and with the chemical transport model CFORS. Transport of Asian dust and mixing of dust with air pollution aerosols were studied. The event of May 24 to June 4 in 2008 was a significant event unusually late in the spring dust season. The dust event of March 12–25, 2009 was an interesting example of elevated dust layer, and transport of dust from the elevated dust layer to the ground by the boundary layer activity was observed with the lidars and surface observations in Japan. The concentration of air pollution aerosols was relatively high during the dust event, and the results suggest that vertical structure as well as transport path is important for the mixing of dust and air pollution aerosols. The dust events in October and December 2009 were examples of dust events in autumn and winter. The online mode CFORS reproduced the observation data generally well, except for the event of May 24 to June 4 in 2008. The results of the fourdimensional variational assimilation of the lidar network data reproduced the dust concentration in Korea and Japan reasonably in that event.     

藏北高原草甸下垫面近地层能量输送及微气象特征

利用GAME/Tibet 1998年IOP观测资料,分析研究藏北高原草甸下垫面近地层的地面加热场、地表能量平衡、地面阻曳系数CD及感热通量整体输送系数CH等特征,得到了一些有关藏北高原草甸下垫面近地层能量输送及微气象特征结构的新认识.