A Microwave Tomographic Approach for Nondestructive Testing of Dielectric Coated Metallic Surfaces

A microwave imaging method for nondestructive testing of perfectly conducting surfaces beyond a layered media is presented. The method is an adaptation of the surface reconstruction approach by Yapar et al. to the present problem. It is based on the analytical continuation of the measured data to the surface under test through a special representation of the scattered field in terms of Fourier transform and Taylor expansion. Then the problem is reduced to the solution of a nonlinear equation which is solved iteratively via the Newton method and regularization in the least squares sense. Numerical simulations show that defects as small as lambda/500 can be recovered through the presented algorithm.     

A data-driven approach to local gravity field modelling using spherical radial basis functions

We propose a methodology for local gravity field modelling from gravity data using spherical radial basis functions. The methodology comprises two steps: in step 1, gravity data (gravity anomalies and/or gravity disturbances) are used to estimate the disturbing potential using least-squares techniques. The latter is represented as a linear combination of spherical radial basis functions (SRBFs). A data-adaptive strategy is used to select the optimal number, location, and depths of the SRBFs using generalized cross validation. Variance component estimation is used to determine the optimal regularization parameter and to properly weight the different data sets. In the second step, the gravimetric height anomalies are combined with observed differences between global positioning system (GPS) ellipsoidal heights and normal heights. The data combination is written as the solution of a Cauchy boundary-value problem for the Laplace equation. This allows removal of the non-uniqueness of the problem of local gravity field modelling from terrestrial gravity data. At the same time, existing systematic distortions in the gravimetric and geometric height anomalies are also absorbed into the combination. The approach is used to compute a height reference surface for the Netherlands. The solution is compared with NLGEO2004, the official Dutch height reference surface, which has been computed using the same data but a Stokes-based approach with kernel modification and a geometric six-parameter “corrector surface” to fit the gravimetric solution to the GPS-levelling points. A direct comparison of both height reference surfaces shows an RMS difference of 0.6 cm; the maximum difference is 2.1 cm. A test at independent GPS-levelling control points, confirms that our solution is in no way inferior to NLGEO2004.     

High-Resolution Forecast Models of Water Vapor Over Mountains: Comparison With MERIS and Meteosat Data

Propagation delay due to variable tropospheric water vapor (WV) is one of the most intractable problems for radar interferometry, particularly over mountains. The WV field can be simulated by an atmospheric model, and the difference between the two fields is used to correct the radar interferogram. Here, we report our use of the U.K. Met Office Unified Model in a nested mode to produce high-resolution forecast fields for the 3-km-high Mount Etna volcano. The simulated precipitable-water field is validated against that retrieved from the Medium-Resolution Imaging Spectrometer (MERIS) radiometer on the Envisat satellite, which has a resolution of 300 m. Two case studies, one from winter (November 24, 2004) and one from summer (June 25, 2005), show that the mismatch between the model and the MERIS fields ( rms = 1.1 and 1.6 mm, respectively) is small. One of the main potential sources of error in the models is the timing of the WV field simulation. We show that long-wavelength upper tropospheric troughs of low WV could be identified in both the model output and Meteosat WV imagery for the November 24, 2004 case and used to choose the best time of model output.     

Hyperspectral anomaly detection within the signal subspace

This letter describes the extension of signal subspace processing (SSP) to the arena of anomaly detection. In particular, we develop an SSP-based, local anomaly detector that exploits the rich information available in the multiple bands of a hyperspectral (HS) image. This SSP approach is based on signal processing considerations, and its entire formulation reduces to a straightforward (and intuitively pleasing) geometric and algebraic development. We extend the basic SSP concepts to the HS anomaly detection problem, develop an SSP HS anomaly detector, and evaluate this algorithm using multiple HS data files.     

Late Cretaceous-Cenozoic history of the Lake Baikal depression and formation of its unique biodiversity

Independent methods of geological and molecular-biological chronologies have made it possible to define generally corresponding stages in the geological and biological evolution of the environments and communities of Lake Baikal since the Late Cretaceous, i.e., during the last 70 myr. All the abiotic elements drastically changed during geological evolution, with destruction of existing and formation of new natural complexes. Nevertheless, some specific zones retained relicts of former settings. The resulting present-day natural complex includes elements of different ages and geneses. Similar to different natural zones of the present-day Earth, which are populated by different biocoenoses, stages in the development of abiotic elements are also characterized by different faunal and floral assemblages. Some taxa were replaced by others, and the resulting aqueous biota of Lake Baikal includes different-age and ecologically different elements. The oldest groups of Baikal organisms appeared approximately 70 Ma ago, although the largest proportion of the lake biota started forming 4–3 Ma ago in response to the most drastic changes in the abiotic elements of the environment. The youngest taxa appeared 1.8 to 0.15 Ma ago, i.e., during the period when superdeep lake environments and mountainous glaciations were developing. The chronological coincidence of main stages in development of abiotic and biotic elements of the nature indicates their relationships. Particular transformations of abiotic elements and the probable mechanism of their influence on the evolution of living communities are also considered.     

Some basic notions in geographical synthesis

Modern geography is based on ecological thinking. In this paper some geoecological notions are discussed: the scales and levels regarding spatial magnitude and complexity, the “hierarchy” of landscape units and espcially the scale of time and the concept of the supper-imposing “stamps”. This last mentioned concept is very important in relation to the problem regarding regionalization and its possibilities. Three “stamps” are recognized: 1. the substrate, 2. the climatic conditions, 3. the human (noötic) influence. Holistic regionalization in which all elements (including the human influences) are telling to full advantage, is unsatisfactory.     

Applying personal carbon trading: a proposed ‘Carbon,Health and Savings System’ for British Columbia,Canada

Addressing climate change requires the synergy of technological, behavioural and market mechanisms. This article proposes a policy framework that integrates the three, deploying personal carbon trading as a key element within a policy portfolio to reduce personal carbon footprints. It draws on policy and human motivation literatures that address the behavioural changes that may be needed in the context of a long-term threat such as climate change. This proposal builds on an analysis of the British Columbia carbon tax, international examples of carbon pricing instruments and strategies for behavioural change such as social networks, loyalty management, mobile apps and gamification. Interviews were conducted with experts in financial services, energy conservation and clean technology, as well as with specialists in climate, health and taxation policy. Their input, together with a review of the theoretical literature and practical case studies, informed the proposed design of a Carbon, Health and Saving System for promoting individual engagement and collective action by linking long-term climate mitigation measures with short-term personal and social goals, including health, recreation and social reinforcement.

Policy Relevance

This article identifies areas for climate policy innovation and recommends policies that can support, promote and enable personal carbon budgeting and collective action. Although this study is focused on British Columbia, both the input provided by key opinion leaders and the proposed framework are applicable to other jurisdictions.

This policy proposal shows how personal carbon trading could work in the context of a Canadian province with an existing climate mitigation policy. It also specifies a minimum viable product approach to establishing the economic, social and technological foundations for personal carbon trading.

The Carbon, Health and Saving System identifies the technologies and stakeholders needed to implement personal carbon trading, and offers the possibility of motivating a widespread conscious human response in the event that carbon taxation proves insufficient to generate economic adaptation in a changing climate.     

A Long-Term Forecast Model of Spring Runoff: The Case of the Belaya River

Doklady Earth Sciences - The results of long-term forecasting of the spring runoff in the Belaya River basin based on the water-balance model are presented. The structure and parameters of the...     

Weak GPS signal tracking using FFT discriminator in open loop receiver

An open loop tracking architecture, which tracks GPS signals under weak and challenging conditions, is analyzed. The in-phase and quadrature-phase integration pair is regarded as a single tone complex signal. An FFT-based method is used as a frequency discriminator to estimate the Doppler frequency residual of the single tone signal. Another FFT-based method applies complex squaring to eliminate the effect of the navigation data bits polarities. The performance of the FFT-based discriminators is assessed in three criteria. Those criteria are the signal strength and dynamic range that can be tracked and the accuracy of the estimated Doppler frequency. In addition, the performance of the discriminators is analyzed to provide the theoretical and simulated peak detection probability. The results indicate that the FFT discriminator can track signals about 5 dB weaker than the signals that can be tracked by the complex squared FFT discriminator. In a quasi-static environment, the Doppler frequency residual can be assumed to be around zero, which can enable the FFT-based discriminators to track signals with approximately 2 dB less power. Moreover, the performance of the FFT-based discriminators is compared with the performance of two other frequency discriminators, namely the fast–slow and power-based. The comparison results indicate that these two frequency discriminators give higher frequency estimation accuracy, but they have a narrower dynamic range.     

Demonstration of sub-meter GPS orbit determination and 1.5 parts in 108 three-dimensional baseline accuracy

Differential tracking of theGPS satellites in high-earth orbit provides a powerful relative positioning capability, even when a relatively small continental U.S. fiducial tracking network is used with less than one-third of the fullGPS constellation. To demonstrate this capability, we have determined baselines of up to2000 km in North America by estimating high-accuracyGPS orbits and ground receiver positions simultaneously. The2000 km baselines agree with very long baseline interferometry(VLBI) solutions at the level of1.5 parts in10 ⁸ and showrms daily repeatability of0.3–2 parts in10 ⁸. The orbits determined for the most thoroughly trackedGPS satellites are accurate to better than1 m. GPS orbit accuracy was assessed from orbit predictions, comparisons with independent data sets, and the accuracy of the continental baselines determined along with the orbits. The bestGPS orbit strategies included data arcs of at least one week, process noise models for tropospheric fluctuations, estimation ofGPS solar pressure coefficients, and combined processing ofGPS carrier phase and pseudorange data. For data arcs of two weeks, constrained process noise models forGPS dynamic parameters significantly improved the solutions.