EXPERIMENTAL STUDY OF FPS SYSTEM IN BRIDGE SEISMIC ISOLATION

An experimental study of a seismically isolated and a comparable non-isolated bridge is presented. The bridge model featured flexible piers, weighed 158kN and was tested on a shake table with an array of real and simulated seismic motions with peak acceleration in the range 0⋅1–1⋅1g. When isolated, the bridge deck was supported by four spherically shaped sliding bearings (known as Friction Pendulum System or FPS bearings) with friction coefficient under dynamic conditions in the range 0⋅07–0⋅12. The experimental results demonstrated a substantial improvement in the ability of the isolated bridge to sustain all levels of seismic excitation under elastic conditions.     

Diel vertical migration of the copepod Calanus sinicus before and during formation of the Yellow Sea Cold Bottom Water in the Yellow Sea

To understand the effects of the Yellow Sea Cold Bottom Water(YSCBW)on the diel vertical migration(DVM)of the copepod Calanus sinicus,we surveyed vertical distribution of C.sinicus at a fixed station in the Yellow Sea before(spring)and during(summer)formation of the YSCBW.Cold water(<10 C)was observed in the bottom layer when the water column was thermally stratified in summer,but the water column was thermally well-mixed in spring 2010.Samples were collected from five different layers at 3-h intervals using an opening-closing net.Adult females(1–155 ind./m3)showed a clear normal DVM pattern throughout the entire water column in spring,whereas adult males did not migrate.DVM of copepodite V(CV)individuals was not clear,but the maximum abundance of CI–CIV occurred consistently in the upper 10–20 m layer,where there was a high concentration of chlorophyll-a(Chl-a)(0.49–1.19μg/L).In summer,weak DVM was limited to cold waters beneath the thermocline for adult females(<30 ind./m3),but not for adult males.The maximum abundance of CI–CIV also occurred consistently in the subsurface layer(20–40 m)together with high concentrations of Chl-a(0.81–2.36μg/L).CV individuals(1–272 ind./m3)moved slightly upward nocturnally to the near-surface layer(10–20 m),where the average temperature was 25.74 C,but they were not found in the surface layer(0–10 m;28.31 C).These results indicate that the existence of the YSBCW affected food availability at depth and the vertical temperature distribution,leading to variation in the amplitude and shape of stage-specific vertical distributions(CI to adults)in C.sinicus before and during the formation of cold waters in the Yellow Sea during the study period.     

High-frequency acoustic backscattering characteristics for acoustic detection of the red tide species Akashiwo sanguinea and Alexandrium affine

Harmful algal blooms(HABs),caused by the overgrowth of certain phytoplankton species,have negative effects on marine environments and coastal fisheries.In addition to cell-counting methods using phytoplankton nets,a hydroacoustic technique based on acoustic backscattering has been proposed for the detection of phytoplankton blooms.However,little is known of the acoustic properties of HAB species.In this study,as essential data to support this technique,we measured the acoustic properties of two HAB species,Akashiwo sanguinea and Alexandrium affine,which occur in the South Sea off the coast of Korea.Due to the small size of the target,we used ultrasound for the measurements.Experiments were conducted under laboratory and field conditions.In the laboratory experiment,the acoustic signal received from each species was directly proportional to the cell abundance.We derived a relationship between the cell abundance and acoustic signal received for each species.The measured signals were compared to predictions of a fluid sphere scattering model.When A.sanguinea blooms appeared at an abundance greater than 3 500 cells/mL,the acoustic signals varied with cell abundance,showing a good correlation.These results confirm that acoustic measurements can be used to detect HAB species.     

Recent Primary Production and Small Phytoplankton Contribution in the Yellow Sea during the Summer in 2016

The high nutrient concentration associated with the mixing dynamics of two warm and cold water masses supports high primary production in the Yellow Sea. Although various environmental changes have been reported, no recent information on small phytoplankton contribution to the total primary production as an important indicator for marine ecosystem changes is currently available in the Yellow Sea. The major objective of this study is to determine the small (< 2 μm) phytoplankton contribution to the total primary production in the Yellow Sea during August, 2016. In this study, we found relatively lower chlorophyll a concentrations in the water column than those previously reported in the central waters of the Yellow Sea. Moreover, the overall contribution of small phytoplankton (53.1%) to the total chlorophyll a concentration was considerably higher in this study than that (10.7%) observed previously. Based on the N/P ratio (67.6 ± 36.6) observed in this study, which is significantly higher than the Redfield ratio (16), we believe that phytoplankton experienced P-limiting conditions during the study period. The average daily carbon uptake rate of total phytoplankton in this study was 291.1 mg C m^-2 d^-1 (± 165.0 mg C m^-2 d^-1) and the rate of small phytoplankton was 205.7 mg C m^-2 d^-1 (± 116.0 mg C m^-2 d^-1) which is 71.9% (± 8.8%) of the total daily carbon uptake rate. This contribution of small phytoplankton observed in this study appears to be higher than that reported previously. Our recent measured primary production is approximately 50% lower than the previous values decades ago. The higher contributions of small phytoplankton to the total chlorophyll a concentration and primary production might be caused by P-limited conditions and this resulted in lower chlorophyll a concentration and total primary production in this study compared to previous studies.     

Effects of Temperature and Salinity on the Egg Development and Larval Settlement of Ciona robusta (Ascidiacea,Phlebobranchia, Cionidae)

Ocean Science Journal - Ascidians are marine benthic organisms, which attach to the surfaces of both natural and artificial substrates from shallow to deep waters around the world. Invasive...     

Energy Consumption and Greenhouse Gas Emission of Korean Offshore Fisheries

This paper presents the energy and greenhouse gas(GHG) emission assessments of Korean offshore fisheries. The consumption of energy by fisheries is a significant concern because of its attendant environmental effect, as well as the cost of the fuel consumed in fishing industry. With the global attention of reducing GHG emission and increasing energy efficiency of fuel, the seafood industry needs to further understand its energy use and reduce its GHG emission. In the present study, the amount of energy consumed and the GHG emission of Korean offshore fisheries in a period from 2009 to 2013 were examined. Offshore fisheries accounted for 24% of Korean production in 2013 and 60% of fuel consumption related GHG emission. Whereas the total GHG emission intensity of this sector improved slightly between 2009 and 2012; as such emission decreased by approximately 1.9%, which increased again in 2013. The average amount of total GHG emission in this five years period was 1.78 × 10~6 tons of carbon dioxide equivalent/year(tCO_2eq. y~(-1)). Active fishing gear was found to consume 20% more fuel than passive gear. However, the production from passive gear was 28%, lower than 72% from active gear. The reason for this is that less abundant stationary resources are harvested using passive gear. Furthermore, the consumption of fuel was significantly influenced by the fishing method. Implementation and development of new fishing technologies and methods are important for improving energy efficiency and reducing the climate impact on fisheries. To realize these purposes, the fishery management system needs to be established by centralizing on energy efficiency and climate effect.     

Sensitivity of Snowfall Characteristics to Meteorological Conditions in the Yeongdong Region of Korea

This study investigates the characteristics of cold clouds and snowfall in both the Yeongdong coastal and mountainous regions under different meteorological conditions based on the integration of numerical modeling and three-hourly rawinsonde observations with snow crystal photographs for a snowfall event that occurred on 29?30 January 2016.We found that rimed particles predominantly observed turned into dendrite particles in the latter period of the episode when the 850 hPa temperature decreased at the coastal site,whereas the snow crystal habits at the mountainous site were largely needle or rimed needle.Rawinsonde soundings showed a well-defined,two-layered cloud structure along with distinctive wind-directional shear,and an inversion in the equivalent potential temperature above the low-level cloud layer.The first experiment with a decrease in lower-layer temperature showed that the low-level cloud thickness was reduced to less than 1.5 km,and the accumulated precipitation was decreased by 87%compared with the control experiment.The difference in precipitation amount between the single-layered experiment and control experiment(two-layered)was not so significant to attribute it to the effect of the seeder?feeder mechanism.The precipitation in the last experiment by weakening winddirectional shear was increased by 1.4 times greater than the control experiment specifically at the coastal site,with graupel particles accounting for the highest proportion(~62%).The current results would improve snowfall forecasts in complicated geographical environments such as Yeongdong in terms of snow crystal habit as well as snowfall amount in both time and space domains.     

New Discovery of the Early Cretaceous Volcanic Rocks on the Barton Peninsula, King George Island,Antarctica and Its Geological Significance

Ages determined with the 40Ar/39Ar isotopic system affirms the Early Cretaceous volcanic activity in the Barton Peninsula, King George Island, Antarctica. Two specimens of basaltic andesite collected from the lowermost volcanic sequence of the peninsula were irradiated and analyzed in different experiments, yielding an identical age spectrum, and two magmatic thermal events of the Early Cretaceous (120.4± 1.6 Ma, 119± 1 Ma) and Early Tertiary (53.1± 1.5 Ma, 52± 1 Ma) are distinguished. The former is interpreted to represent the primary cooling age of basaltic andesite, whereas the latter is the thermal reset age caused by the intrusion of granitic pluton. These new ages clearly indicate that volcanism was active during the Early Cretaceous on the Barton Peninsula and that intensive hydrothermal alteration and mineralization of Mesozoic volcanic rocks resulted from Tertiary magmatism.     

Geology, Mineralogy and Geochemistry of Carbonate Replacement-Type Lead-Zinc-Silver Deposits in Janggun Mine, Republic of Korea

INTRODUCTIONThe Janggun mine,Republic of Korea,is located in thesoutheast of the Seoul,about latitude36°5 1′N and longitude12 9°0 4′E. In this mine area is situated the Bonghwa m ineral-ized zone of the Taebaegsan mining district,Korea.The geo-logic setting of the region was described as the Samgeum riQuadrangle(Kim et al.,196 2 ) .The general and local geolo-gy near the mine area have been studied by L ee (196 7) ,Hwang and Reedman(1975 ) .This mine consists of four min-eral de…     

Fatigue strength assessment of MARK-III type LNG cargo containment system

The aim of this paper is to investigate the fatigue strength of the GTT Mark-III type LNG insulation system. The LNG insulation system consists of several composite layers with various connections; plywood, triplex, reinforced polyurethane foam and mastic. Consequently, the LNG insulation system may include mechanical failures such as cracks as well as delaminations within the layers due to sloshing impact loads and fatigue loadings. In addition, these failures may cause a significant decrease of structural integrity. In this study, a series of fatigue tests have been carried out for Mark-III type LNGC insulation systems at room temperature considering the effect of sloshing impact. The load levels have been determined based on the ultimate strength of reinforced polyurethane foam. The aim of the study is to investigate the typical failure characteristics of the MARK-III LNG insulation system and to obtain the S–N data under fatigue loading. A consolidated single S–N curve is obtained based on a systematic finite element procedure. Future use of the S–N data in fatigue analysis requires that the response analysis is carried out using a finite element model with the same mesh density and material properties. This study can be used as a fundamental study for the fatigue assessment of the LNGC insulation system as well as a design guideline.