马槽滩磷矿区的矿体形态特征及合理勘查工程间距

马槽滩磷矿区矿体形态复杂,底板起伏不定,多年来勘查工程间距不断改变,因此用多种方法讨论了合理工程间距.探采对比和数理统计学方法求得控制资源量的合理工程间距分别为200m×150m和200m×100m;控制半变异函数的变程亦为200m×100m,均与现行规范相吻合。但沿走向和倾向的变异相同,因此建议用正方形网格进行勘查更为合理,间距为150m×150m。     

对一种振冲碎石桩复合地基沉降计算方法——Priebe法的改进

通过对经典的Priebe沉降计算法分析,以及面积置换率的变化对桩体压缩性假设作了改进;对桩土重度差异及承受荷载时应力和变形与深度的关系作了分析,归纳出相应的数学计算公式,用工程实例进行了验证。得到的结果表明改进是合理、适用的,可为今后的设计和施工提供参考。     

地铁隧道结构变形监测信息管理系统的开发

地铁隧道结构变形监测的特殊性、周期性和长期性,使其信息量非常庞大.信息管理是地铁隧道结构变形监测中一项重要的工作,现有的管理方式效率很低.为了高效、准确地管理监测信息,及时分析预报地铁隧道结构的稳定状况,本文结合南京地铁运营期隧道结构变形监测实例,开发了一套具有变形监测资料存储、预处理、管理分析、可视化分析、预测预报及限值预警等功能的信息管理系统,保证了准确及时快速的数据处理和信息反馈,具有良好的运用和推广前景.     

Response of riparian vegetation to water-table changes in the lower reaches of Tarim River, Xinjiang Uygur, China

The lower reaches of Tarim River in the Xinjiang Uygur region of western China had been dried out for more than 30 years before water began to be diverted from Konqi (Peacock) River via a 927-km-long channel in year 2000, aimed at improving the riparian ecological systems. Since then, eight intermittent water deliveries have been carried out. To evaluate the response of riparian vegetation to these operations, the groundwater regime and vegetation changes have been monitored along the 350-km-long stem of the river using a network of 40 dug wells at nine transects across the river and 30 vegetation plots at key sites. Results show that the water table rose remarkably, i.e. from a depth of 9.87 m before the water delivery to 3.16 m after the third water delivery. The lateral distance of affected water table extended to 1,050 m from the riverbank after the fourth water delivery. The riparian vegetation has changed in composition, type, distribution, and growing behavior. This shows that the water deliveries have had significant effects on restoration of riparian ecosystems.     

Spatial distribution features and environment effect of heavy metal in intertidal surface sediments of Guanhe estuary, Northern Jiangsu Province

In northern Jiangsu coastal zone area, Guanhe River is the biggest river and has the best navigation conditions among rivers which flow into the Yellow Sea. The grain sizes show gradual increase from the high intertidal zone to lower intertidal zone. The heavy metal values have slight changes along both sides of the river mouth, but show an evident change perpendicular to the tidal flat. In the latter case, they show a good correlation with grain size fluctuation, that is, the heavy metal values gradually decline when the grain size increases from the high intertidal zone to the lower intra-tidal zone. Analyses of the heavy metal elements show that on the Guanhe estuary surface sediment, the content of the elements Hg, As and Cu is above background values; Pb and Zn contents are rather close to the background values; and Cd content is less than the background values. The element Hg comes out to be harmful in a medium level to ecological environment, while the elements of Cr, As, Cu, Pb, Zn and Cd fall in a safe range of MPL. On the whole, Guanhe estuary tidal flat is not very harmful to the ecology in terms of the heavy metals. __________ Translated from Marine Geology & Quaternary Geology, 2007, 27(5): 23–32 [译自: 海洋地质与第四纪地质]     

洞穴完井工艺在寿阳地区煤层气钻井中的应用

洞穴完井工艺包括钻井、完井、排水采气等工序,为提高煤层渗透率,最大限度的保证煤层气解析与运移,洞穴完井一般要求有效井径3-4m,及一定范围的破碎带。远东能源公司为开采寿阳地区15#煤层中的煤层气,部署了4口生产井．其井身设计为三开结构。钻井主要设备为T685WS顶驱车载钻机及多台不同型号的空压机,采用潜孔锤冲击钻进．以空气、空气泡沫为冲洗介质,钻进至15#目标煤层底板以下46m处完钻,然后利用可伸缩式扩孔器进行扩孔。在扩孔至距三开井底8～10m时．开始采用空气和清水憋压,通过瞬间释放压力,使煤层坍塌,如此反复,至造穴直径达到要求。由于严格按照技术标准及操作流程作业,采取的技术措施合理,4口井均已顺利投入生产,增产效果显著。可见该种洞穴完井技术的应用,不仅可以保护煤层原生结构及环境,并且还能减少煤层气射孔、压裂等环节的费用．对于煤层气井施工具有重要的经济意义。     

地震勘探测量数据的快速处理和管理

目前山区地震测量施工主要的困难体现在山区放样难、内业数据处理复杂、测量成果无法进行异常检查等方面,其严重影响后续资料处理和解释质量。针对以上难点,利用AUTOCAD为平台,开发了一套物探测量数据处理系统。该系统具有展点、点内插、绘制测线剖面图、管理测点信息、打印成果报表等功能,实现了地震勘探测量数据的快速处理及有效检核．提高了野外测量放样的施工效率和数据的准确度。另外其图层管理及系统辅助功能,还可为地震勘探施工设计提供参考。     

曲线的弯曲识别方法研究

提出了一新的弯曲识别方法及其相应的算法,实例验证了该方法的有效性.     

谈测绘项目管理

本文从工程项目管理学的观点,结合测绘项目的特殊性,阐述了测绘项目管理的基本方法和要求,内容包括测绘项目组织与程序、计划、质量、进度与合同管理等。     

GPS-RTK联合全站仪的野外数据采集

对于地形测绘和其它环境条件复杂的地区,用常规方法进行数据采集比较困难,传统的测绘方法越来越不能满足测量效率和成本的要求,但采用GPS RTK与全站仪联合作业,使RTK与全站仪优势互补,在保证测量精度的前提下,可大幅度提高测量速度和效率。