Deposition and diagenesis of the lacustrine-fluvial Cangfanggou Group (uppermost Permian to Lower Triassic), southern Junggar Basin,NW China: a contribution from sequence stratigraphy

The Junggar Basin in NW China contains lacustrine hydrocarbon source rocks which are among the highest quality of hydrocarbon potential in the world. Oil reservoirs in the basin are very substantial: target reservoirs span Carboniferous to Tertiary strata and include Permo-Triassic lacustrine and fluvial sandstones. The Junggar Basin was a foreland basin during the late Permian to Cenozoic, possibly with strike-slip tectonics at the southern margin during Mesozoic time. The Cangfanggou Group, as one of the major reservoirs, is well-exposed in the eastern part of the southern Junggar Basin. A measured outcrop section and a number of borehole logs coupled with resistivity logs were used to attempt sequence stratigraphic analysis. Detailed sedimentological studies on the outcrops and borehole cores have demonstrated that the Cangfanggou Group is characterized by alternating lacustrine and fluvial deposits. Four depositional sequences have been recognized. For each sequence, the basal boundary is marked by erosional truncation of fluvial channel conglomeratic sandstones in sharp contact with underlying lacustrine or floodplain mudstones. The top of each lowstand systems tract is normally overlain by the transition to lacustrine or maximum flooding surface. The transgressive systems tract is normally not identifiable at the basin margin, but was developed in the basinward area and characterized by interbedded fining-upward distal fluvial and shallow lacustrine deposits. The highstand systems tract at the basin margin is characterized by very thick floodplain mudstones or shallow lacustrine deposits, and by typical coarsening-upward parasequences of shallow lacustrine deposits in more basinward areas. Sediment input to the basin was controlled by tectonics and climate. Depositional sequences were probably controlled by fluctuating change of lake level: this was in turn controlled by climate (runoff), modified by tectonics in specific areas.The sandstones studied are exclusively volcanic litharenites. Diagenetic studies suggest that the calcite cementation, pore-filling clay minerals and zeolites occluded substantial porosity in the sandstones examined because they are compositionally immature. However, notable secondary porosity in varying proportions is present in the sandstones of the Cangfanggou Group, resulting from the dissolution of unstable detrital grains. The lowstand fluvial/distal fluvial sandstones recorded the highest average porosity and highest permeability, in which some primary porosity may remain because early formed clay coatings inhibited further compaction. The combination of residual primary porosity and significant amount of secondary porosity in the sandstones of the Cangfanggou Group may constitute moderate to good reservoirs. In contrast, the lacustrine fine-grained sandstones is characterized by clay authigenesis and zeolitization, in which the porosity was obliterated by the zeolites and extensive illitization; the lowstand fluvial channel sandstones in the basin margin areas are characterized by extensive calcite cementation which greatly reduced the porosity and permeability.This is the fifth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

流体在岩浆型铬铁矿和铂族元素成矿过程中的作用及意义

镁铁- 超镁铁岩是揭示地幔物质组成和壳幔相互作用的重要窗口，也是Ni- Cu- PGE- Cr等金属矿产资源的重要载体。不同的镁铁- 超镁铁岩体赋矿特征明显不同：蛇绿岩以产出铬铁矿床为特征，阿拉斯加型岩体主要赋含铂族元素(PGE)矿床，大型层状岩体则可同时产出铬铁矿床、PGE矿床和Cu- Ni硫化物矿床。这种成矿差异显然与赋矿岩体形成的构造背景、母岩浆经历的岩浆演化过程有关，但缺少关键控制因素的研究。前人对上述不同种类矿床的研究工作主要集中于地幔源区的部分熔融、上升过程中或岩浆房内的围岩混染和结晶分异等岩浆过程，而极少关注流体作用。近年来，实验岩石学和岩石地球化学的研究均表明幔源岩浆演化过程中的流体活动可能对成矿元素的富集迁移起到至关重要的作用，同时这些成矿元素的赋存状态和分配系数也在不断更新。厘清Cr和PGE在熔体演化——尤其是流体出溶过程中的地球化学行为，刻画并揭示其迁移富集、分离和再富集的成矿过程及控制因素，已成为当前岩浆矿床研究的热点。本文围绕富水流体与铬铁矿和PGE成矿关系的科学问题，总结了不同镁铁- 超镁铁岩体的成矿差异以及铬铁矿和PGE矿床成矿过程中的流体活动记录，提出流体性质和组分对铬铁矿和PGE迁移富集的控制作用，强调有必要开展蛇绿岩、大型层状镁铁- 超镁铁岩体和阿拉斯加型岩体的对比研究。     

碳中和目标下关键矿产在清洁能源转型中的作用、供需分析及其建议

在"碳中和"目标的驱动下，全球能源系统向清洁化、低碳化甚至无碳化发展已是大势所趋。针对向清洁能源转型的需求，采用了统计对比、分类汇总、综合分析等方法，分析研究了关键矿产在电池、电网、低碳发电和氢能等行业中的作用和需求。结合当前关键矿产产量的地理集中度高、项目开发周期长、资源质量下降等矿产供应和投资计划不能满足清洁能源转型的需求等问题，提出确保关键矿产多样性供应，推动价值链各环节的技术创新，扩大回收利用，增强供应链弹性和市场透明度，将更高的环境、社会和治理标准纳入主流程及加强生产者和消费者之间的国际合作等建议。     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

Linear current instability in loop prominences

By use of the dispersion equation given by Song, Wu, and Dryer (1987) for a cylinder plasma with mass motion and gravity included, we investigate the linear current instabilities developed in loop prominences. The results indicate that the mode of linear instability depends mainly on whetherv _s ² > or not, wherev _s is the sonic velocity at heightz, =GM/(R +z) is the gravity potential,G the gravitational constant,M andR the mass and the radius of the Sun respectively. Ifv _s ² > , then the sausage instability will be dominant. Otherwise, the kink instability will be more important. A possible explanation of knot structure, which appears sometimes in solar loop prominences has been given.     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

Umbral oscillations and penumbral waves in Hα

We present examples of umbral oscillations observed on Big Bear H filtergram movies and investigate the relation between umbral oscillations and running penumbral waves occurring in the same sunspot. Umbral oscillations near the center of the umbra are probably physically independent of the penumbral waves because the period of these umbral oscillations (150 s) is shorter than the penumbral wave period (270 s) but not a harmonic. We also report dark puffs which emerge from the edge of the umbra and move outward across the penumbra, and which have the same period as the running penumbral waves. We interpret these dark puffs to be the extension of chromospheric umbral oscillations at the edge of the umbra. It is suggested that the dark puffs and the running penumbral waves have a common source: photospheric oscillations just inside the umbra.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.