Inclined K–Ar illite age spectra in brittle fault gouges: effects of fault reactivation and wall‐rock contamination

K–Ar clay fraction ages of brittle faults often vary with grain size, decreasing in the finer size fractions, producing an inclined age–grain‐size spectrum. K–Ar ages and mineralogical characterization of gouges from two normal faults in the Kongsberg silver mines, southern Norway, suggest that inclined spectra derived from brittle fault rocks reflect the mixing of inherited components with authigenic mineral phases. The ages of the coarsest and finest fractions constrain faulting at c. 260–270 Ma and reactivation around 200–210 Ma, respectively. This study demonstrates how wall‐rock contamination influences the K–Ar age of the coarsest size fractions and that authigenic illite and K‐feldspar can crystallize synkinematically under equivalent conditions and thus yield the same K–Ar ages.     

Observations of Comet 9P/Tempel 1 around the Deep Impact event by the OSIRIS cameras onboard Rosetta

The OSIRIS cameras on the Rosetta spacecraft observed Comet 9P/Tempel 1 from 5 days before to 10 days after it was hit by the Deep Impact projectile. The Narrow Angle Camera (NAC) monitored the cometary dust in 5 different filters. The Wide Angle Camera (WAC) observed through filters sensitive to emissions from OH, CN, Na, and OI together with the associated continuum. Before and after the impact the comet showed regular variations in intensity. The period of the brightness changes is consistent with the rotation period of Tempel 1. The overall brightness of Tempel 1 decreased by about 10% during the OSIRIS observations. The analysis of the impact ejecta shows that no new permanent coma structures were created by the impact. Most of the material moved with . Much of it left the comet in the form of icy grains which sublimated and fragmented within the first hour after the impact. The light curve of the comet after the impact and the amount of material leaving the comet ( of water ice and a presumably larger amount of dust) suggest that the impact ejecta were quickly accelerated by collisions with gas molecules. Therefore, the motion of the bulk of the ejecta cannot be described by ballistic trajectories, and the validity of determinations of the density and tensile strength of the nucleus of Tempel 1 with models using ballistic ejection of particles is uncertain.     

Experimental boron isotope fractionation between tourmaline and fluid: confirmation from in situ analyses by secondary ion mass spectrometry and from Rayleigh fractionation modelling

Tourmaline synthesised in an experiment with low boron excess was analysed in situ by secondary ion mass spectrometry. It revealed significant B isotope zonation with ¹¹B/¹⁰B ratios increasing in the growth direction of the crystals. Trend, magnitude and absolute values strongly support results from high-B-excess isotope fractionation experiments. Furthermore, the closed system B-isotopic evolution of the experimental fluid was modelled by Rayleigh fractionation. The model results are in excellent agreement with the measured B-isotope composition of the run-product fluid. Consequently, low-element-excess experiments are proposed as an ideal approach to determine fluid-solid isotope fractionation factors for systems that are characterised by Rayleigh fractionation.     

Choice chamber experiments to test the attraction of postflexion Rhabdosargus holubi larvae to water of estuarine and riverine origin

Although the recruitment of larvae and juveniles of marine fishes into estuaries has been well documented, little is known about the factors governing the immigration of estuary-associated marine fishes into estuaries. Fishes have a well-developed sense of smell and it has been suggested by several workers that olfactory cues of freshwater or estuarine origin serve as stimuli, attracting larvae and juveniles of estuary-associated species into estuaries. Attraction of postflexion Rhabdosargus holubi larvae to estuary and river water from the Kowie estuarine system, South Africa, was measured using a rectangular choice chamber. In experiments, conducted during peak recruitment periods, larvae selected estuary and river water with a significantly higher frequency than sea water. This study, the first to assess the possible role of olfaction in the recruitment process of an estuary-associated marine fish species, demonstrates that larvae are able to recognise water from different origins, probably based on odour.     

Intrusion of igneous rocks — Physical aspects

Igneous rocks occur in two predominant modes. The plutonic mode is characterized by intrusive emplacement under compressional tectonic stress regimes. The volcanic mode is dominated by the eruption of large volumes of magma through fault controlled dyke structures in extensional tectonic stress regimes.Those typical intrusive phenomena are discussed in the light of the physical parameters like the dynamic-thermal regime of the lithosphere, the nature and source of buoyant forces as well as mechanical aspects of subsolidus flow of rocks.Twodimensional numerical models on the basis of typical parameter specifications and by means of a coupled dynamic-thermal physical approximation are presented. The simulation of buoyantly-driven diapiric intrusions has been adopted to derive parameters which are critically controlling the transport and emplacement of intrusion under surroundings of variable viscosity. Both sill-type and batholith-type structures are presented and discussed with respect to their predominant dependence on mechanical and physical conditions.

---

Zusammenfassung Magmatische Gesteine treten in zwei vorherrschenden Erscheinungsformen auf. Die Plutonite sind charakterisiert durch eine intrusive Platznahme unter kompressiven tektonischen Spannungsbedingungen. Die Vulkanite werden beherrscht von gro\en Volumina eruptierten Magmas, das vorzugsweise durch weiträumige Bruchsysteme unter Zugspannungsbedingungen aufsteigt.Derartige magmatische Phänomene werden aus der Sicht physikalischer Parameter wie dynamisch-thermische Bedingungen der Lithosphäre, der Natur und des Ursprungs von Auftriebskräften sowie der Mechanik von Gesteinsformationen diskutiert.Es werden zweidimensionale numerische Modellrechnungen auf der Grundlage typischer Parameterbereiche vorgestellt. Die Rechnungen basieren auf einer dynamisch-thermischen Approximation von Flie\vorgängen. Sie werden eingesetzt zur Untersuchung von diapirartigen Intrusionsvorgängen, die durch Dichteinversionen angetrieben sind. Hierbei sollen die Parameter bestimmt werden, die Aufstieg und Platznahme der Intrusionen bestimmen. Die Umgebung ist charakterisiert durch eine vorgebbare variable Viskosität. Sowohl linsenförmige Sill-Strukturen als auch typische Batholith-Strukturen werden mathematisch simuliert. Ihr Zusammenhang mit den strukturbestimmenden Parametern wird aufgezeigt.

---

Résumé Les roches magmatiques se répartissent en deux catégories principales: la catégorie plutonique est caractérisée par une mise en place dans des régimes de contraintes tectoniques compressives; la catégorie volcanique est dominée par l'éruption de volumes importants de magma à travers des systèmes de cassures dans des régimes de contraintes tectoniques d'extension.Ces phénomènes intrusifs sont discutés à la lumière de paramètres physiques tels que: le régime thermique et dynamique de la lithosphère, la nature et l'origine des forces ascensionnelles, ainsi que les aspects mécaniques du fluage sub-solidus des roches.Les auteurs présentent des modèles numériques bidimensionnels basés sur des domaines paramétriques typiques, au moyen d'une approximation dynamo-thermique de phénomène d'écoulement. La simulation d'intrusions diapiriques permet de déduire les paramètres qui déterminent le transport et la mise en place d'une intrusion dans diverses conditions de viscosité de l'encaissant. Les structures de type sill et de type batholite sont discutées en relation avec les conditions mécaniques et physiques dont elles dépendent.

---

. . , . , .: , , . , . - . , . , , .

     

Sodic Pyroxene and Sodic Amphibole as Potential Reference Materials for In Situ Lithium Isotope Determinations by SIMS

Two large pegmatitic crystals of sodic pyroxene (aegirine) and sodic amphibole (arfvedsonite) from the agpaitic igneous Ilímaussaq Complex, south Greenland were found to be suitable as reference materials for in situ Li isotope determinations. Lithium concentrations determined by SIMS and micro‐drilled material analysed by MC‐ICP‐MS generally agreed within analytical uncertainty. The arfvedsonite crystal was homogeneous with [Li] = 639 ± 51 μg g^?1 (2s, n = 69, MC‐ICP‐MS and SIMS results). The aegirine crystal shows strongly developed sector zoning, which is a common feature of aegirines. Using qualitative element mapping techniques (EPMA), the homogeneous core of the crystal was easily distinguished from the outermost sectors of the crystals. The core had a mean [Li] of 47.6 ± 3.6 μg g^?1 (2s, n = 33) as determined by SIMS. The seven micro‐drilled regions measured by solution MC‐ICP‐MS returned slightly lower concentrations (41–46 μg g^?1), but still overlap with the SIMS data within uncertainty. Based on MC‐ICP‐MS and SIMS analyses, the variation in δ⁷Li was about 1‰ in each of the two crystals, which is smaller than that in widely used glass reference materials, making these two samples suitable to serve as reference materials. There was, however, a significant offset between the results of MC‐ICP‐MS and SIMS. The latter deviated from the MC‐ICP‐MS results by ?6.0 ± 1.9‰ (2s) for the amphibole and by ?3.9 ± 1.9‰ (2s) for the aegirine. This indicates the presence of a significant matrix effect in SIMS determinations of Li isotopes for amphibole and pyroxene relative to the basalt glasses used for calibration. Based on the MC‐ICP‐MS results, mean δ⁷Li values of +0.7 ± 1.2‰ (2s, n = 10) for the arfvedsonite crystal and of ?3.7 ± 1.2‰ (2s, n = 7) for the core of the aegirine crystal were calculated. Adopting these values, SIMS users can correct for the specific IMF (instrumental mass fractionation) of the ion probe used. We propose that these two crystals serve as reference materials for in situ Li isotope determinations by SIMS and pieces of these two crystals are available from the first author upon request.     

Results from One-Year Continuous Operation of a Large Aperture Scintillometer over a Heterogeneous Land Surface

A large-aperture scintillometer (LAS) was operated continuouslyduring a period of more than one year over a heterogeneous land surface in Central Europeat the transition between marine and continental climates. The LAS measurements of the refractiveindex structure parameter, C_N ², were used to estimate the sensible heat flux. Thiswas possible for about 60to 80% of the time under daytime conditions during thesummer, with lower values obtained for the cold season (October to March). Using datafrom a three-week long field experiment, the LAS-based heat flux was compared with a weighedaverage of local heat flux measurements over the main land use classes (forest, agriculture,water) in the area, resulting in reasonable agreement. LAS-based heat fluxes were then used forcomparison with the heat flux values of a numerical weather prediction model. An over-predictionof the model heat flux was found in summer but the modelled values were lower than the LASderived data during the cold season.     

Interaction of wind and cold-season hydrologic processes on erosion from complex topography following wildfire in sagebrush steppe

Wildfire is a natural component of sagebrush (Artemisia spp.) steppe rangelands that induces temporal shifts in plant community physiognomy, ground surface conditions, and erosion rates. Fire alteration of the vegetation structure and ground cover in these ecosystems commonly amplifies soil losses by wind- and water-driven erosion. Much of the fire-related erosion research for sagebrush steppe has focused on either erosion by wind over gentle terrain or water-driven erosion under high-intensity rainfall on complex topography. However, many sagebrush rangelands are geographically positioned in snow-dominated uplands with complex terrain in which runoff and sediment delivery occur primarily in winter months associated with cold-season hydrology. Current understanding is limited regarding fire effects on the interaction of wind- and cold-season hydrologic-driven erosion processes for these ecosystems. In this study, we evaluated fire impacts on vegetation, ground cover, soils, and erosion across spatial scales at a snow-dominated mountainous sagebrush site over a 2-year period post-fire. Vegetation, ground cover, and soil conditions were assessed at various plot scales (8 m² to 3.42 ha) through standard field measures. Erosion was quantified through a network of silt fences (n = 24) spanning hillslope and side channel or swale areas, ranging from 0.003 to 3.42 ha in size. Sediment delivery at the watershed scale (129 ha) was assessed by suspended sediment samples of streamflow through a drop-box v-notch weir. Wildfire consumed nearly all above-ground live vegetation at the site and resulted in more than 60% bare ground (bare soil, ash, and rock) in the immediate post-fire period. Widespread wind-driven sediment loading of swales was observed over the first month post-fire and extensive snow drifts were formed in these swales each winter season during the study. In the first year, sediment yields from north- and south-facing aspects averaged 0.99–8.62 t ha⁻¹ at the short-hillslope scale (~0.004 ha), 0.02–1.65 t ha⁻¹ at the long-hillslope scale (0.02–0.46 ha), and 0.24–0.71 t ha⁻¹ at the swale scale (0.65–3.42 ha), and watershed scale sediment yield was 2.47 t ha⁻¹. By the second year post fire, foliar cover exceeded 120% across the site, but bare ground remained more than 60%. Sediment yield in the second year was greatly reduced across short- to long-hillslope scales (0.02–0.04 t ha⁻¹), but was similar to first-year measures for swale plots (0.24–0.61 t ha⁻¹) and at the watershed scale (3.05 t ha⁻¹). Nearly all the sediment collected across all spatial scales was delivered during runoff events associated with cold-season hydrologic processes, including rain-on-snow, rain-on-frozen soils, and snowmelt runoff. Approximately 85–99% of annual sediment collected across all silt fence plots each year was from swales. The high levels of sediment delivered across hillslope to watershed scales in this study are attributed to observed preferential loading of fine sediments into swale channels by aeolian processes in the immediate post-fire period and subsequent flushing of these sediments by runoff from cold-season hydrologic processes. Our results suggest that the interaction of aeolian and cold-season hydrologic-driven erosion processes is an important component for consideration in post-fire erosion assessment and prediction and can have profound implications for soil loss from these ecosystems. © 2019 John Wiley & Sons, Ltd.     

Macroscopic representation of structural geometry for simulating water and solute movement in dual-porosity media

The structure of macroporous or aggregated soils and fractured rocks is generally so complex that it is impractical to measure the geometry at the microscale (i.e., the size and the shape of soil aggregates or rock matrix blocks, and the myriad of fissures or fractures), and use such data in geometry-dependent macroscale flow and transport models. This paper analyzes a first-order type dual-porosity model which contains a geometry-dependent coefficient, β, in the mass transfer term to macroscopically represent the size and shape of soil or rock matrix blocks. As a reference, one- and two-dimensional geometry-based diffusion models were used to simulate mass transport into and out of porous blocks of defined shapes. Estimates for β were obtained analytically for four different matrix block geometries. Values for β were also calculated by directly matching analytical solutions of the diffusion models for a number of selected matrix block geometries to results obtained with the first-order model assuming standard boundary conditions. Direct matching improved previous results for cylindrical macropore geometries, especially when relatively small ratios between the outer soil mantle and the radius of the inner cylinder were used. Results of our analysis show that β is closely related to the ratio of the effective surface area available for mass transfer, and the soil matrix volume normalized by the effective characteristic length of the matrix system. Using values of β obtained by direct matching, an empirical function is derived to estimate macroscopic geometry coefficients from medium properties which in principle are measurable. The method permits independent estimates of β, thus allowing the dual-porosity approach eventually to be applied to media with complex and mixed types of structural geometry.