长江口及其邻近陆架区夏季网采浮游植物及其影响因素

2009年6、8月长江口及其邻近陆架区的网采样品中检出浮游植物9门395种(含223种硅藻与125种甲藻)。浮游植物丰度8月(3 077.15×104 cells/m3)显著高于6月(107.80×104 cells/m3)。随长江冲淡水势力增强,位于长江口的丰度高值区8月较6月更偏外侧。种类丰富度8月高于6月,但多样性和均匀度指数略低于6月。6月尖刺伪菱形藻和三角角藻占绝对优势,8月优势种主要有尖刺伪菱形藻、笔尖形根管藻和铁氏束毛藻。骨条藻虽非优势种,但在长江冲淡水区丰度较高。相似性分析和多维尺度分析表明,浮游植物群落组成时空差异显著。典范对应分析表明,温度和盐度是分别影响6、8月群落分布的首要因子。根据水动力和化学参数,该区浮游植物群落分布与环流变化和水团消长密切相关。     

中国近海海水中几种微量金属离子的分布研究

中国近海海水中的锌等微量元素，尚未进行过较为广泛而可靠的分布研究。极为零星的资料，还是近几年来在沿岸进行污染调查时，用陈旧的方法测定的。 世界海洋海水中微量元素的含量，不同文献报道的数据，常有一定的差别。这是自然变化，抑方法误差(包括所测形态)，是值得研究的。 本文采用单池示差反向极谱法，比较广泛而可靠地研究了中国近海海水中,锌等微量，元素的离子(和不稳定络合物)的地球化学分布。测定锌、铅、铜、镉时，样品不加任何试剂，因而避免了元素存在形态的转移及被测离子的带入或损失。     

水平气压梯度力差分格式误差的定量分析

通过分析发现地形坐标系中气压梯度力差分格式的计算误差应分为二类，其中，第二类误差在水平坐标面倾斜时出现。这种误差可理解为将水平坐标面上的气压(或位势高度)插回到等高面(或等压面)上的插值误差。 构造气压梯度力差分格式的目的正是为了减小这种第二类误差，而不是其他误差。 误差分析表明静力扣除法和Corby 格式的第二类误差都很小，比一般方法的误差小约一个量级。分析还表明第二类误差产生的主要原因是由于气压随高度非线性变化。依据这一分析思路，本文改进了#As(z)#a坐标系中的静力扣除法。 改进后的方法比改进前的误差小约一个量级。     

广西大气能见度气候特征分析

对1980至2012年广西85个县市能见度资料进行统计分析得出：广西主要城市及其周边地区能见度较低,边远山区及边境地区较高,呈现东部低、西部高的特点;广西近32a能见度年均值在14.4至18.2km之间,总体呈下降趋势.一年之中,能见度夏季高、冬季低,汛期能见度明显好于非汛期;能见度与气象要素的相关分析表明,能见度与温度、风速成正比,与压强、降水、湿度成反比.     

Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.     

An approach to determination of phenolic compounds in seawater using SPME-GC-MS based on SWCNTs coating

Phenolic compounds have become one kind of the important pollutants of the marine environment. Single-walled Carbon nanotubes, as one-dimensional nano materials, have light weight and perfect hexagonal structure of connections, with many unusual mechanical, chemical and electrical properties. In recent years, with the research of carbon nanotubes and other nano materials, the application prospect is also constantly discussed. In this paper, homemade single-walled carbon nanotubes(SWCNTs) coating was used for establishing an analytical approach to the determination of five kinds of phenolic compounds in seawater using SPME-GC-MS. Optimal conditions: After saturation was conducted with Na Cl, and p H was adjusted to 2.0 with H_2SO_4, the extract was immersed in a water bath at 40 for GC℃-MS determination through 40-min agitating extraction at 500 rmin~(-1) and 3-min desorption at 280℃. The liniearities ranged between 0.01-100 μg L~(-1), and the determination limits ranged between 1.5-10 ngL~(-1). The relative standard deviation(RSD, n = 5) was less than 6.5%. For the phenolic compounds obtained from the spiked recovery test for actual seawater samples, the rates of recovery were 87.5%-101.7%, and the RSDs were less than 8.8%, which met the requirements of determination. Due to its simplicity, high efficiency and low consumption, this approach is suitable for the analysis of trace amounts of phenolic compounds in marine waters.     

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.     

Water system characteristics of Karst river basins in South China and their driving mechanisms of hydrological drought

Natural Hazards - It is common knowledge that drought is considered one of the most damaging natural disasters in terms of economic costs, societal problems, and ecological impacts. In this study,...     

Zircon U-Pb Geochronology,Geochemistry and Petrogenesis of Early Cretaceous A-type Granites in the Mikengshan Area,Southern Jiangxi ProvinceEI北大核心CSCD

In the Mikengshan-Yanbei area, a special region for the tin mineralization in South China, there are some Yanshanian granites and porphyries and associated porphyry tin deposits (e.g., Yanbei). Although the tin mineralization is closely associated with the granitoids magmatism, the age and petrogenesis of the granites remain controversial. The Mikengshan pluton, which intrudes into the rhyolitic tuff and pyroclastic rocks of the Upper Jurassic Jilongzhang Formation, is the largest one in Mikengshan-Yanbei area and mainly consists of K-feldspar bearing granites. In this study, we report new age and geochemical data for the Mikengshan K-feldspar bearing granites. LA-ICP-MS zircon U-Pb age dating shows that they were generated in the Early Cretaceous (~138 Ma). They have high SiO2 (74.42% to 76.69%), low Al2O3 (12.39% to 13.49%) and Mg# (11 to 19), and negative Eu, Sr and Ba anomalies, and are rich in potassium (most K2O/Na2O=1.37 to 1.94) and high field strength elements (HFSEs), and are weakly peraluminous (A/CNK=1.03 to 1.1) with high 10000×Ga/Al ratios (3.46 to 4.96) and slightly high zircon saturation temperatures (807 ℃ to 817 ℃), showing the characteristics of the typical A-type granites. Moreover, they have high Rb contents 842×10-6 to 1295×10-6, Rb/Sr (90 to 255) ratios and show rare earth elements (REE) tetrad effect, which are similar to those of high fractionated granites. Thus, we suggested that the Mikengshan K-feldspar bearing granites are high fractionated and aluminous A-type granite. Their slightly high εNd(t) values (-3.4 to -4.6) indicate that the mantle components should have played a role during their formation. Taking into account regional igneous rocks and tectonic setting data, we suggest that the Mikengshan K-bearing granites were formed in an extensional setting, which was probably related to the roll-back of the subducted Paleo-Pacific plate. © 2018, Science Press. All right reserved.