Soft‐sediment deformation structures in Cretaceous non‐marine deposits of southeastern Gyeongsang Basin,Korea: Occurrences and origin

A variety of soft‐sediment deformation structures formed during or shortly after deposition occurs in the Cretaceous Seongpori and Dadaepo Formations of the southeastern Gyeongsang Basin exposed along coastal areas of southeastern Korean Peninsula for 0.5–2 km. These are mostly present in a fluvial plain facies, with interbedded lacustrine deposits. In this study, the features of different kinds of soft‐sediment deformation structures have been interpreted on the basis of sedimentology of structure‐bearing deposits, comparison with normal sedimentary structures, timing and mechanism of deformation, and triggering mechanisms. The soft‐sediment deformation structures can be classified into four morphological groups: (i) load structures (load casts, ball‐and‐pillow structures); (ii) soft‐sediment intrusive structures (dish‐and‐pillars, clastic dykes, sills); (iii) ductile disturbed structures (convolute folds, slump structures); and (iv) brittle deformation structures (syndepositional faulting, dislocated breccia). The most probable triggering mechanisms resulting in these structures were seismic shocks. These interpretations are based on the following field observations: (i) location of the study area within tectonically active fault zone reactivated several times during the Cretaceous; (ii) deformation structures confined to single stratigraphic levels; (iii) lateral continuity and occurrences of various soft‐sediment deformation structures in the deformed level over large areas; (iv) absence of depositional slope to indicate gravity sliding or slumping; and (v) similarity to the structures produced experimentally. The soft‐sediment deformation structures in the study areas are thus interpreted to have been generated by seismic shocks with an estimated magnitude of M > 5, representing an intermittent record of the active tectonic and sedimentary processes during the development and evolution of two formations from the late Early Cretaceous to the Late Cretaceous.     

Near real-time high-resolution airborne camera,AEROCam, for precision agriculture

Precision agriculture often relies on high-resolution imagery to delineate the variability within a field. Airborne Environmental Research Observational Camera (AEROCam) was designed to meet the needs of agriculture producers, ranchers, and researchers, who require high-resolution imagery in a near real-time environment for rapid decision support. AEROCam was developed and operated through a unique collaboration between several departments at the University of North Dakota, including the Upper Midwest Aerospace Consortium (UMAC), the School of Engineering and Mines, and flight operations at the John D. Odegard School of Aerospace Sciences. AEROCam consists of a Redlake MS4100 area-scan multi-spectral digital camera that features a 1920 × 1080 CCD array (7.4-μm detector) with 8-bit quantization. When operated at ～2 km above ground level, multispectral images with four bands in the visible and near infrared have a ground sample distance of 1 m with a horizontal extent of just over 1.6 km. Depending on the applications, flying at different altitudes can adjust the spatial resolution from 0.25 to 2 m. Rigorous spectral and radiometric calibrations allow AEROCam to be used in a variety of applications, qualitative and quantitative. Equipped with an inertial measurement unit (IMU) system, the images acquired can be geo-referenced automatically and delivered to end users near real time through our Digital Northern Great Plains system (DNGP). The images are also available to zone mapping application for precision farming (ZoneMAP), an online decision support tool for creating management zones from remote sensing imagery and data from other sources. Operational since 2004, AEROCam has flown over 250 sorties and delivered over 150,000 images to the users in the Northern Great Plains region, resulting in numerous applications in precision agriculture and resource management.     

Effects of an Omnivorous Katydid,Salinity, and Nutrients on a Planthopper-<Emphasis Type="Italic">Spartina</Emphasis> Food Web

Top–down and bottom–up effects interact to structure communities, especially in salt marshes, which contain strong gradients in bottom–up drivers such as salinity and nutrients. How omnivorous consumers respond to variation in prey availability and plant quality is poorly understood. We used a mesocosm experiment to examine how salinity, nutrients, an omnivore (the katydid Orchelimum fidicinium) and an herbivore (the planthopper Prokelisia spp.) interacted to structure a simplified salt marsh food web based on the marsh grass Spartina alterniflora. Bottom–up effects were strong, with both salinity and nutrients decreasing leaf C/N and increasing Prokelisia abundance. Top–down effects on plants were also strong, with both the herbivore and the omnivore affecting S. alterniflora traits and growth, especially when nutrients or salt were added. In contrast, top–down control by Orchelimum of Prokelisia was independent of bottom–up conditions. Orchelimum grew best on a diet containing both Spartina and Prokelisia, and in contrast to a sympatric omnivorous crab, did not shift to an animal-based diet when prey were present, suggesting that it is constrained to consume a mixed diet. These results suggest that the trophic effects of omnivores depend on omnivore behavior, dietary constraints, and ability to suppress lower trophic levels, and that omnivorous katydids may play a previously unrecognized role in salt marsh food webs.     

Major human Hepatitis A virus genotype in Hong Kong marine waters and detection by real-time PCR

Marine waters from seven sites around Hong Kong with varying levels of sewage pollution were analyzed for Hepatitis A virus (HAV) by PCR cloning and DNA sequencing of the highly variable VP1/2A junction of the HAV genome. Phylogenetic analysis of 10 PCR clones from each of the HAV-positive marine sites indicated that human HAV genotype IB is the most widely distributed type in Hong Kong waters. A sensitive and quantitative TaqMan-based PCR method targeting the 5′-noncoding region (5′-NCR) of HAV was used to quantify HAV particles in marine water samples along with the total Escherichiacoli counts being enumerated on TBX medium for comparison. Our results showed that no correlation of any significance between HAV and E. coli counts was observed which underscores the inadequacy in using E. coli as a sanitary standard to predict the levels of HAV in marine waters.     

On Factors Controlling Air–Water Gas Exchange in a Large Tidal River

Air–water gas exchange is an important process in aquatic systems, including tidal rivers and estuaries. While there are now reliable and routine methods for determining gas exchange over a range of temporal and spatial scales in the ocean and these measurements have resulted in widely used wind speed parameterizations to calculate air–sea gas exchange, the same has not been true for coastal inland waterways. Some studies have suggested that this difference is methodological, while others point to the existence of additional drivers for gas exchange besides wind in rivers and estuaries. Here, we present gas transfer velocities measured in the tidal Hudson River with a method widely used in oceanic studies, the ³He/SF₆ dual tracer technique. Airside and waterside forcings were determined with an anemometer and an acoustic Doppler current profiler, respectively. The results confirm that wind is the dominant driver of gas exchange in the tidal Hudson River, with negligible contribution from bottom-generated turbulence. Furthermore, a parameterization between wind speed and gas exchange developed for the ocean is able to predict gas exchange in this environment with high accuracy. It is hoped that by transferring methodology used in oceanic studies to rivers and estuaries, robust data can be obtained that will eventually allow development of widely applicable relationships between easily measured environmental variables and gas exchange in tidal inland waters.     

Comparison of radiocarbon and OSL dating methods for a Late Quaternary sediment core from Lake Ulaan,Mongolia

Both radiocarbon and optically stimulated luminescence (OSL) dating methods were applied to test their suitability for establishing a chronology of arid-zone lacustrine sediments using a 5.88-m-long core drilled from Lake Ulaan, southern Mongolia. Although the radiocarbon and OSL ages agree in some samples, the radiocarbon ages are older than the corresponding OSL ages at the 550-cm depth horizon (late Pleistocene) and in the 100–300-cm interval (early to late Holocene). In the early to late Holocene, radiocarbon ages are consistently older than OSL ages by 4,100–5,800 years, and in the late Pleistocene by 2,700–3,000 years. Grain-size analysis of early to late Holocene sediments and one late Pleistocene sediment sample (550-cm depth) indicates that eolian processes were the dominant sediment-transport mechanism. Also, two late Pleistocene sediments samples (from 400- to 500-cm depths) are interpreted to have been deposited by both eolian and glaciofluvial processes. Accordingly, the radiocarbon ages that were older than the corresponding OSL ages during the Holocene seem to have been a consequence of the influx of ¹⁴C-deficient carbon delivered from adjacent soils and Paleozoic carbonate rocks by the westerly winds, a process that is also active today. In addition to the input of old reworked carbon by eolian processes, the late Pleistocene sediments were also influenced by old carbon delivered by deglacial meltwater. The results of this study suggest that when eolian sediment transport is suspected, especially in lakes of arid environments, the OSL dating method is superior to the radiocarbon dating method, as it eliminates a common ‘old-carbon’ error problem.     

A new Ordovician eurypterid (Arthropoda: Chelicerata) from southeast Turkey: Evidence for a cryptic Ordovician record of Eurypterida

A new species of eurypterid, Paraeurypterus anatoliensis gen. et sp. nov., is described from the Upper Ordovician (Katian) ?ort Tepe Formation of southeast Turkey. The single specimen, preserving the carapace, mesosoma and fragments of appendages, appears morphologically intermediate between the eurypteroid families Dolichopteridae and Eurypteridae. P. anatoliensis retains the plesiomorphic conditions of crescentic eyes with enlarged palpebral lobes and a quadrate carapace with ornamentation consisting of small pustules but also displaying the derived characteristics of genal facets and a row of large acicular scales across the posterior of each tergite. Phylogenetic analysis incorporating each of the major eurypterine clades and all Eurypterina having a three-segmented genital operculum (the triploperculate condition) resolves eurypteroids to be an unnatural group, with Dolichopteridae and Eurypteridae forming part of a grade leading to diploperculate Eurypterina. P. anatoliensis is intermediate between the two eurypteroid families, as is ‘Eurypterus’ minor from the Pentland Hills of Scotland, which is shown to be a distinct genus and assigned to Pentlandopterus gen. nov. Using the phylogenetic topology to infer ghost ranges for each of the major eurypterid clades reveals that the majority of eurypterid superfamilies must have originated by the Katian, indicating a largely unsampled record of Ordovician eurypterids. The occurrence of poor dispersers such as Paraeurypterus in the Ordovician of Gondwana is puzzling, and it has been suggested that they dispersed to the continent during periods of sea level lowstand in the Sandbian and Hirnantian, however this does not explain the lack of Ordovician species in North America and Europe, given the well-sampled nature of these continents, and an alternative is proposed whereby eurypterids originated in Gondwana and radiated out to Laurentia and Baltica in the late Ordovician and early Silurian, thus explaining their sudden appearance in the European and North American rock record.     

Geogene Versus Anthropogene Origin of Trace Metals in Sediments in Cua Luc Estuary and Ha Long Bay, Vietnam

In the present study, the geochemistry of 49 surficial-bed and 101 core sediment samples is investigated to clarify the origin of trace metals in the Cua Luc Estuary and Ha Long Bay, which is a famous World Natural Heritage Site in Vietnam. Moreover, the potential mobility of trace metals is also assessed and their relationship with reference elements (Al, Fe, and Ca) and organic matter is established in order to make recommendations for sediment management and monitor future pollution. Generally, trace metals display higher concentrations in Ha Long Bay compared to the Cua Luc Estuary. However, this is controlled by the distribution of the fine (clay?+?silt) fraction, and hence the concentrations of Al, Fe, Ca, and organic matter (OM). The comparison of concentrations of trace metals (normalized towards Al) between the surficial sediments and the subsurface core sediments based on ¹³⁷Cs datings indicates that almost all surficial-sediment data fall inside or deviate slightly from the 95 % prediction interval of a background regression line. In addition, as determined by a Community Bureau of Reference three-step extraction, trace metals mainly dominate in the residual fraction (assumed to relate to crystal lattice of primary and secondary minerals), and this fraction does not change much in recent sediment layers. Therefore, trace metals are supposed to be derived from natural bio/geochemical processes and are characterized by a low potential mobility. Consequently, the established linear regression relationships of trace metal vs. Al or multiple regression relationships of trace metal vs. multi-elements (Al, Fe, Ca, and OM) are useful for the prediction of background levels of trace metals in sediments in future pollution monitoring and assessment programs.     

Seismic isolation by rubber–soil mixtures for developing countries

This paper proposes a promising seismic isolation method particularly suitable for developing countries, which makes use of rubber–soil mixtures. Apart from reducing the level of shaking in the horizontal direction, the distinctive advantage of the proposed method is that it can also significantly reduce the shaking level of vertical ground motion, to which an increasing attention has been paid in the earthquake engineering community. On the other hand, the use of scrap tires as the rubber material can provide an alternative way to consume the huge stockpile of scrap tires all over the world. Moreover, the low cost of this proposed seismic protection scheme can greatly benefit those developing countries where resources and technology are not adequate for earthquake mitigation with well‐developed, yet expensive, techniques. The proposed method has been demonstrated through a series of numerical simulations and a parametric study has also been carried out. Lastly, five important issues regarding the concept and feasibility have been discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Biodegradation of Crude Oil by Individual Bacterial Strains and a Mixed Bacterial Consortium Isolated from Hydrocarbon Contaminated Areas

A preliminary study was undertaken to determine the optimal conditions for the biodegradation of a crude oil. Among 57 oil‐degrading bacterial cultures isolated from oil‐contaminated soil samples, Bacillus sp. IOS1‐7, Corynebacterium sp. BPS2‐6, Pseudomonas sp. HPS2‐5, and Pseudomonas sp. BPS1‐8 were selected for the study based on the efficiency of crude oil utilization. Along with the selected individual strains, a mixed bacterial consortium prepared using the above strains was also used for degradation studies. The mixed bacterial consortium showed more growth and degradation than did individual strains. At 1% crude oil concentration, the mixed bacterial consortium degraded a maximum of 77% of the crude oil. This was followed by 69% by Pseudomonas sp. BPS1‐8, 64% by Bacillus sp. IOS1‐7, 45% by Pseudomonas sp. HPS2‐5, and 41% by Corynebacterium sp. BPS2‐6. The percentage of degradation by the mixed bacterial consortium decreased from 77 to 45% as the concentration of crude oil was increased from 1 to 12%. Temperature of 35°C and pH 7 were found to be optimum for maximum degradation.