Simple determination of dimethylsulfide (DMS) and dimethylsulfoniopropionate (DMSP) using solid-phase microextraction and gas chromatography-mass spectrometry

Solid-phase microextraction (SPME) is a simple, sensitive and less destructive method for the determination of dimethylsulfide (DMS) in seawater. Combined with detection by gas chromatography-mass spectrometry (GC-MS), the method had sufficient sensitivity (minimum detectable concentration of DMS was 0.05 nM), and practical levels of reproducibility (relative standard deviation ≤7%) and linearity (r ² > 0.995) over a wide concentration range (0.5 to 910 nM). The protocol developed was applied to a Sagami Bay water sample to determine concentrations of DMS and DMSP, and in situ DMSP-lyase activity.     

Eddy Shedding from the Kuroshio Bend at Luzon Strait

TOPEX/POSEDIENT-ERS satellite altimeter data along with the mean state from the Parallel Ocean Climate Model result have been used to investigate the variation of Kuroshio intrusion and eddy shedding at Luzon Strait during 1992–2001. The Kuroshio penetrates into the South China Sea and forms a bend. The Kuroshio bend varies with time, periodically shedding anticyclonic eddies. Criteria of eddy shedding are identified: 1) When the shedding event occurs, there are usually two centers of high Sea Surface Height (SSH) together with negative geostrophic vorticity in the Kuroshio Bend (KB) area. 2) Between the two centers of high SSH there usually exists positive geostrophic vorticity. These criteria have been used to determine the eddy shedding times and locations. The most frequent eddy shedding intervals are 70, 80 and 90 days. In both the winter and summer monsoon period, the most frequent locations are 119.5°E and 120°E, which means that the seasonal variation of eddy shedding location is unclear.     

Geodynamics of the deep sedimentary basin of the Caspian Sea region: paragenetic correlation of seismicity and mud volcanism

In this paper we analyze seismic regime and earthquake depth distribution and correlation of seismicity and mud volcanism in the Azerbaijan and the Caspian Sea region. For the present region we have calculated accurate source locations, seismic activity, earthquake repetition and released earthquake energy parameters. It is shown that the active tectonic processes in the region are concentrated within the thick sedimentary cover that we consider as a general source of contemporary stress and a main structural element responsible for the origin of regional earthquakes. The correlation of seismicity and mud volcanism is of paragenetic character.     

Aspherical correction for free vibration of elastically anisotropic solid by means of theXYZ algorithm

By applying the perturbation theory to theXYZ algorithm (a kind of variational method), the difference f in free vibration frequencies between sphere and ellipsoid was approximated as , where i and _i (i = x,y andz) (i=x, y andz) are aspherical coefficients and asphericities of the ellipsoid, respectively. We developed an analytic method to compute the aspherical coefficients719-4 by using theXYZ algorithm. A numerical example was given for an ellipsoidal olivine, and an attempt was made to estimate the asphericities of the specimen by a least-squares method, based on the relationship between frequency shift and asphericity.     

X-ray observation of the Jovian impacts of comet Shoemaker - Levy 9

An ASCA observation of the Jovian impact of the comet Shoemaker-Levy 9 is reported. Four impacts of H, L, Q1 and R were observed and four impacts of B, C, G, and Q2 were observed within 60 minutes after their impacts. No significant flaring of X-ray emission was observed. Upper limit X-ray fluxes of 90 % confidence level, averaged 5 minutes just after the impacts, were 2.4 × 10^–13 erg sec^–1 cm^–2, 3.5 × 10^–13 erg sec^–1 cm^–2, 1.6 × 10^–13 erg sec^–1 cm^–2 and 2.9 × 10^–13 erg sec^–1 cm^–2 for the impacts of H, L, Q1 and R, respectively, in the 0.5(0.7 for H and Q1)–10 keV energy range. However, a hint of X-ray enhancement around Jupiter from July 17 to July 19 was detected with about 2 6 × 10^–14 erg sec^–1 cm^–2 in the 0.5–10 keV energy range.     

Infrared polarization of venus: Its periodic fluctuations and evidence for thin haze

Infrared polarimetry of Venus over the phase angles from 18 to 171° has been made extending previous measurements (S. Sato, K. Kawara, Y. Kobayashi, H. Okuda, K. Noguchi, T. Mukai, and S. Mukai (1980). Icarus43, 288) in both wavelength λ and phase angle θ. The results of polarization measurements at 2.25 μm ? λ ? 5.0 μm are (i) small positive and negative values at K(2.25 μm), (ii) a remarkable variation with λ in the CVF(2.2?4.2μm) filter region, (iii) a nearly smooth curve as a function of θ having a peak value of ～36% at θ ～ 90° at both 3.6 μm and L′(3.8 μm), and (iv) a decrease with increasing field of view at M(5.0 μm) due to the contamination of thermal emission from the dark crescent. Furthermore, at 3.6 μm and L′(3.8 μm), (v) higher values at the poles than at the equator and (vi) 4.5- to 5.9-day periodic fluctuations are also found. From a comparison with model calculations, the results confirm the existence of a thin haze layer consisting of submicron-size particles above the main clouds of Venus; e.g., its optical thickness is about 0.1 at λ ～ 0.94 μm. In addition, result (vi) could be explained by a variation of the optical thickness of the haze layer or that of the brightness temperature of the main clouds.     

Gravitational N-body problem on the accretion process of terrestrial planets

Numerical integration of the gravitational N-body problem has been carried out for a variety of photoplanetary clusters in the range N = 100 to 200. Particles are assumed to coagulate at collisions irrespective of relative velocity and mass ratio of the particles. It is shown graphically how the dispersed N-bodies accumulate to a single planet through mutual collisions. The velocity distribution and size distribution of bodies are also investigated as functions of time in the accretion process. The root mean square velocity of bodies in a cluster increases with time in an early stage of accretion but decreases with time in a late stage of accretion. Accretion rates of planets are found to be dependent strongly on the initial number density distribution, the initial size distribution, and the initial velocity distribution of bodies. Formation of satellites of about 10% in the planet mass is common to most cases in the present study. A substantial mass of bodies also escapes from the cluster. Many satellites and escapers formed during the accretion process of planets may be source materials of heavy bombardment in the early history of planets.     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.