SHORT COMMUNICATION­­A field experiment of cusp formation on a coarse clastic beach using a suspended video‐camera system

Cusp formation was continuously monitored on a manually flattened, plane section of a coarse clastic, microtidal, pocket beach on the Pacific coast of Japan using a CCD camera suspended in the air. Vertical video pictures enabled the examination of the temporal change in foreshore morphologies and swash pattern. Boulders on the beach face appeared to have triggered the formation of beach cusps, which gradually and successively grew up alongshore. In 2·5 h, two well defined beach cusps had developed with a spacing of 2·2 and 2·5 m, respectively. Copyright © 2000 John Wiley & Sons, Ltd.     

Nutrients,light and phytoplankton production in the shallow,tropical coastal waters of Bandon Bay,Southern Thailand

Phytoplankton primary production and its regulation by light and nutrient availability were investigated in the shallow, tropical coastal waters of Bandon Bay, Southern Thailand. The bay was meso‐eutrophicated and highly turbid, receiving river water discharge. Water column stratification was consistently weak during both rainy and dry seasons. Dissolved inorganic nitrogen (DIN) was higher off the river mouth than in the other regions, suggesting that river water discharge was a main source of DIN. By contrast, dissolved inorganic phosphorus (DIP) showed a significant negative correlation with total water depth, implying that regeneration around the sea floor was an important source of DIP. Surface DIN and DIP showed positive correlations with surface primary production (PP) and water column primary productivity (ΣPP*), respectively. The combined correlation and model analyses indicate that total water depth had an ambivalent influence on water column primary production (ΣPP); shallower water depth induced more active regeneration of nutrients, but it also caused higher turbidity and lower light availability as a result of enhanced resuspension of sediments. Furthermore, there was a vertical constraint for phytoplankton during the rainy season: total water depth tended to be shallower than euphotic zone depth. In conclusion, light limitation and vertical constraint owing to shallow water depth appear to be more important than nutrient limitation for water column primary production in Bandon Bay.     

Influence of Redox Mediators and Electron Donors on the Anaerobic Removal of Color and Chemical Oxygen Demand from Textile Effluent

Color removal was evaluated in anaerobic assays using synthetic (SE) and real (RE) effluents containing the dye Direct Black 22 (DB22). The focus was on the individual influence of two electron donors (EDs), sucrose and ethanol; and their combination with two redox mediators (RMs), lawsone and riboflavin. In addition to SE assays, the EDs were combined with sulfate which was present in the RE. Distinct behavior was observed with both assays. In the case of SE, using the EDs sucrose and ethanol resulted in DB22 removal efficiency of 93 and 83%, respectively; but only 27% in the control. The respective removal rates were 27.8‐ and 4.4‐fold higher than that of the control. Using the EDs with the RM lawsone resulted in color removal higher than that with riboflavin. Interestingly, in the ethanol + sulfate assay, late release of the last was observed, possibly due to the desulfonation reaction of the aromatic structures during the DB22 molecule breakdown. In the case of RE, no improvement was observed with either EDs; and some combinations with the RMs even resulted in decreased color removal. Therefore, the used EDs and RMs showed positive effect on color removal in SEs; but unexpectedly not in REs.     

Organic micropollutants in marine plastics debris from the open ocean and remote and urban beaches

To understand the spatial variation in concentrations and compositions of organic micropollutants in marine plastic debris and their sources, we analyzed plastic fragments (∼10 mm) from the open ocean and from remote and urban beaches. Polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), dichloro-diphenyl-trichloroethane and its metabolites (DDTs), polybrominated diphenyl ethers (PBDEs), alkylphenols and bisphenol A were detected in the fragments at concentrations from 1 to 10,000 ng/g. Concentrations showed large piece-to-piece variability. Hydrophobic organic compounds such as PCBs and PAHs were sorbed from seawater to the plastic fragments. PCBs are most probably derived from legacy pollution. PAHs showed a petrogenic signature, suggesting the sorption of PAHs from oil slicks. Nonylphenol, bisphenol A, and PBDEs came mainly from additives and were detected at high concentrations in some fragments both from remote and urban beaches and the open ocean.     

Application of an S‐shaped curve model to the temporal development of tafoni of salt‐weathering origin

To describe temporal change in tafone development, an S‐shaped curve equation is proposed: Z = Z_c [1 ? (n + 1) exp (? β t ) + n exp (? (1 + 1/n) β t )] , where Z is observed tafone depth, Z_c is ultimate tafone depth, t is time, and n and β are constants. The applicability of this model is examined using tafone data selected from seven sites, which are categorized into three different salt‐weathering environments: a spray/splash‐dominant (occasionally wave‐affected) supra‐tidal zone, aerosol‐affected coastal regions, and inland desert areas. The results indicate that the equation can well describe tafone development in each of these environments. An investigation based on the values of n and β, determined through a best fit of the equation to the data, suggests that n characterizes site‐specific environmental conditions and β reflects the magnitude of factors controlling the recession mechanism of tafone surfaces. It is found that (1) the maximum rate of tafone growth dramatically decreases from supra‐tidal, through coastal, to desert environments, and (2) the growing mode of tafoni is different depending on the environmental settings. The erosional force to facilitate the development of tafoni at supra‐tidal sites is estimated to be about 400 times greater than that in the general coastal area. Copyright © 2011 John Wiley & Sons, Ltd.     

Empirical ocean-color algorithms to retrieve chlorophyll-a, total suspended matter, and colored dissolved organic matter absorption coefficient in the Yellow and East China Seas

A bio-optical dataset collected during the 1998?C2007 period in the Yellow and East China Seas (YECS) was used to provide alternative empirical ocean-color algorithms in the retrieval of chlorophyll-a (Chl-a), total suspended matter (TSM), and colored dissolved organic matter (CDOM) absorption coefficients at 440 nm (ag₄₄₀). Assuming that remote-sensing reflectance (Rrs) could be retrieved accurately, empirical algorithms for T_Chl (regionally tuned Tassan??s Chl-a algorithm) in case-1 waters (T_Chl2i in case-2 waters), T_TSM (regionally tuned Tassan??s TSM algorithm), and T_ag440 or C_ag440 (regionally tuned Tassan??s or Carder??s ag₄₄₀ algorithm) were able to retrieve Chl-a, TSM, and ag₄₄₀ with uncertainties as high as 35, 46, and 35%, respectively. Applying the standard SeaWiFS Rrs, T_Chl was not viable in the eastern part of the YECS, which was associated with an inaccurate SeaWiFS Rrs retrieval because of improper atmospheric correction. T_Chl behaved better than other algorithms in the turbid case-2 waters, although overestimation was still observed. To retrieve more reliable Chl-a estimates with standard SeaWiFS Rrs in turbid water (a proxy for case-2 waters), we modified T_Chl for data with SeaWiFS normalized water-leaving radiance at 555 nm (nLw₅₅₅) > 2 mW cm^?2 ??m^?1 sr^?1 (T_Chl2s). Finally, with standard SeaWiFS Rrs, we recommend switching algorithms from T_Chl2s (for case-2 waters) to MOC_Chl (SeaWiFS-modified NASA OC4v4 standard algorithm for case-1 waters) for retrieving Chl-a, which resulted in uncertainties as high as 49%. To retrieve TSM and ag₄₄₀ using SeaWiFS Rrs, we recommend empirical algorithms for T_TSM (pre-SeaWiFS-modified form) and MT_ag440 or MC_ag440 (SeaWiFS Rrs-modified forms of T_ag440 or C_ag440). These could retrieve with uncertainties as high as 82 and 52%, respectively.     

The early Miocene (~25 Ma) volcanism in the northern Kyushu-Palau Ridge,enriched mantle source injection during rifting prior to the Shikoku backarc basin opening

The northern Kyushu-Palau Ridge (KPR), remnant conjugate arc of the Izu-Ogasawara (Bonin)-Mariana (IBM) active arc, is dominated by basalt-andesite except for the Komahashi-Daini Seamount where acidic plutonic rocks of 38 Ma were recovered. These mafic to intermediate volcanics are produced by the rifting volcanism in the proto-IBM arc associated with spreading of the Shikoku Basin. The HFSE and HREE contents and ratios of these volcanics indicate enriched source mantle composition compared to recent volcanic front. The LILE ratios exhibit similar characteristics to reararc volcanism of the recent Izu arc, and some enriched volcanics exhibit high abundance of sediment melt inputs. Based on these observations and compilations of the published data set, the replacement event of the wedge mantle under the IBM arc occurred two times. The first event occurred between 45 and 38 Ma, with Pacific type mantle being replaced by depleted Indian type mantle. The second event occurred between 36 and 25 Ma, enriched mantle flowed from reararc side. The slab component during the proto-IBM arc rifting was a similar characteristic to recent reararc volcanism of the Izu arc, and sediment melt added in a local area.     

Bulk density effects on soil hydrologic and thermal characteristics: A numerical investigation

Soil bulk density (ρ_b) is commonly treated as static in studies of land surface dynamics. Magnitudes of errors associated with this assumption are largely unknown. Our objectives were to (a) quantify ρ_b effects on soil hydrologic and thermal properties and (b) evaluate effects of ρ_b on surface energy balance and heat and water transfer. We evaluated 6 soil properties, volumetric heat capacity, thermal conductivity, soil thermal diffusivity, water retention characteristics, hydraulic conductivity, and vapour diffusivity, over a range of ρ_b, using a combination of 6 models. Thermal conductivity, water retention, hydraulic conductivity, and vapour diffusivity were most sensitive to ρ_b, each changing by fractions greater than the associated fractional changes in ρ_b. A 10% change in ρ_b led to 10–11% change in thermal conductivity, 6–11% change in saturated and residual water content, 49–54% change in saturated hydraulic conductivity, and 80% change in vapour diffusivity. Subsequently, 3 field seasons were simulated with a numerical model (HYDRUS‐1D) for a range of ρ_b values. When ρ_b increased 25% (from 1.2 to 1.5 Mg m^?3), soil temperature variation decreased by 2.1 °C in shallow layers and increased by 1 °C in subsurface layers. Surface water content differed by 0.02 m³ m^?3 for various ρ_b values during drying events but differences mostly disappeared in the subsurface. Matric potential varied by >100 m of water. Surface energy balance showed clear trends with ρ_b. Latent heat flux decreased 6%, sensible heat flux increased 9%, and magnitude of ground heat flux varied by 18% (with a 25% ρ_b increase). Transient ρ_b impacted surface conditions and fluxes, and clearly, it warrants consideration in field and modelling investigations.     

Layout design of rockbolts for natural ground reinforcement

The present study addresses a layout design of rockbolts for reinforcing natural ground structures applying a special optimization method, called multiphase layout optimization. Rockbolts are used to tighten loosed natural ground, and the layout of rockbolts are determined without sufficient information about the physical properties of the ground materials. Because of this uncertainty, unexpected deformation often occurs at the excavation surface of natural ground. In that case, it is requested to determine an effective layout of the additional rockbolts promptly with respect to the actual deformation at the construction site. However, it is not easy to determine the optimal layout because of its complexity, and consequently, it has no choice but to determine the layout in an empirical way. This study introduces a numerical approach to determine an optimal layout of rockbolts with respect to arbitrarily possible deformation of natural ground. The objective is to maximize the stiffness of the overall ground structure reinforced with rockbolts. For optimization, a gradient‐based optimization scheme is applied because of its numerical efficiency. It was verified from a series of numerical examples that this method has great potential to improve the stiffness of the overall ground structure and shows a certain applicability to a practical design. Copyright © 2013 John Wiley & Sons, Ltd.