A mathematical model of spit growth and barrier elongation: Application to Fire Island Inlet (USA) and Badreveln Spit (Sweden)

A mathematical model of spit growth and barrier elongation adjacent to an inlet (of arbitrary width), supplied by sediment coming from longshore sediment transport, was developed based on the spit growth model proposed by Kraus (1999). The fundamental governing equation is the conservation equation for sand, where the width of the spit is assumed constant during growth. The portion of the longshore sediment transport feeding the spit has been estimated based on the ratio between the depth of the inlet channel and the depth of active longshore transport. Sediment transport from the channel due to the inlet flow, as well as other sinks of sand (e.g., dredging), are taken into account. Measured data on spit elongation at Fire Island Inlet, United States, and at Badreveln Spit, Sweden, were used to validate the model. The simulated results agree well with the measured data at both study sites, where spit growth at Fire Island was restricted by the inlet flow and the growth at Badreveln Spit was unrestricted. The model calculation for Fire Island Inlet indicates that the dredging to maintain channel navigation is the major reason for the stable period observed from 1954 to 1994 at the Fire Island barrier. The average annual net longshore transport rate at the eastern side of the Fire Island inlet obtained in this study was about 220,000 m³/yr, of which approximately 165,000 m³/yr (75% of the net longshore transport) is deposited in the inlet feeding the spit growth, whereas the remaining portion (25%) is bypassed downdrift through the ebb shoal complex.     

High‐pressure polymorphs in Yamato‐790729 L6 chondrite and their significance for collisional conditions

Shock pressure recorded in Yamato (Y)‐790729, classified as L6 type ordinary chondrite, was evaluated based on high‐pressure polymorph assemblages and cathodoluminescence (CL) spectra of maskelynite. The host‐rock of Y‐790729 consists mainly of olivine, low‐Ca pyroxene, plagioclase, metallic Fe‐Ni, and iron‐sulfide with minor amounts of phosphate and chromite. A shock‐melt vein was observed in the hostrock. Ringwoodite, majorite, akimotoite, lingunite, tuite, and xieite occurred in and around the shock‐melt vein. The shock pressure in the shock‐melt vein is about 14–23 GPa based on the phase equilibrium diagrams of high‐pressure polymorphs. Some plagioclase portions in the host‐rock occurred as maskelynite. Sixteen different CL spectra of maskelynite portions were deconvolved using three assigned emission components (centered at 2.95, 3.26, and 3.88 eV). The intensity of emission component at 2.95 eV was selected as a calibrated barometer to estimate shock pressure, and the results indicate pressures of about 11–19 GPa. The difference in pressure between the shock‐melt vein and host‐rock might suggest heterogeneous shock conditions. Assuming an average shock pressure of 18 GPa, the impact velocity of the parent‐body of Y‐790729 is calculated to be ~1.90 km s^?1. The parent‐body would be at least ~10 km in size based on the incoherent formation mechanism of ringwoodite in Y‐790729.     

Comparison of four ensemble methods combining regional climate simulations over Asia

A number of uncertainties exist in climate simulation because the results of climate models are influenced by factors such as their dynamic framework, physical processes, initial and driving fields, and horizontal and vertical resolution. The uncertainties of the model results may be reduced, and the credibility can be improved by employing multi-model ensembles. In this paper, multi-model ensemble results using 10-year simulations of five regional climate models (RCMs) from December 1988 to November 1998 over Asia are presented and compared. The simulation results are derived from phase II of the Regional Climate Model Inter-comparison Project (RMIP) for Asia. Using the methods of the arithmetic mean, the weighted mean, multivariate linear regression, and singular value decomposition, the ensembles for temperature, precipitation, and sea level pressure are carried out. The results show that the multi-RCM ensembles outperform the single RCMs in many aspects. Among the four ensemble methods used, the multivariate linear regression, based on the minimization of the root mean square errors, significantly improved the ensemble results. With regard to the spatial distribution of the mean climate, the ensemble result for temperature was better than that for precipitation. With an increasing number of models used in the ensembles, the ensemble results were more accurate. Therefore, a multi-model ensemble is an efficient approach to improve the results of regional climate simulations.     

Regional seismic responses of shallow basins incorporating site‐city interaction analyses on high‐rise building clusters

This study assesses the 3D amplification effects in shallow basins and quantifies the effects of site‐city interaction (SCI) on high‐rise buildings. A regional‐scale 3D spectral element simulation is conducted on the Tuen Mun‐Yuen Long basin, which contains multiple subbasins with heterogeneous and nonlinear soil profiles, while 3D city models with various building layouts are fully integrated into the basin model for our SCI study. We found a good correlation between spectral amplification factors and soil depths. Site response is significantly amplified at basin edges and centers due to surface waves generated at basin edges and the focusing effects stemming from 3D basin geometry. Transfer functions of 3D basins can be up to fourfold at fundamental frequencies as compared to 1D response, and further amplifications occur at high frequencies due to surface waves. In the SCI simulations, we observe wave trapping in the open space amid buildings resulting in energy concentration and up to twofold PGA amplifications. The wave trapping effect diminishes as the space between buildings increase beyond their range of influence (～100 m). The SCI analyses show that destructive kinetic energy in superstructures increases 28% in one horizontal direction but decreases 22% in the other. Our study concluded that, 1D site response analysis can significantly underestimate the seismic demand in shallow basins. Site‐city interaction of high‐rise buildings increases the short‐period spectra of ground motions, leading to an increase in their story accelerations by up to 50% and to a substantial decrease in the seismic safety of short structures in their vicinity.     

Radiolarian Age of Red Chert from the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. The radiolarian age of red chert from the Kunimiyama area of the Northern Chichibu Belt was determined in order to constrain the depositional age of the Kunimiyama deposit that is among the largest ferromanganese deposits in Japan. Pseudoalbaillella cf scalprata Holdsworth and Jones, Pseudoalbaillella cf longicornis Ishiga and Imoto and Pseudoalbaillella sp. belonging to the Ps. lomentaria Zone are found in the red chert, indicating an age of middle Early Permian (middle Wolfcampian). The red chert occurs immediately above the ferromanganese deposit, and the boundary between them is gradual. Based on their mode of occurrence and geochemical features, it is most likely that radiolarian chert and ferromanganese precipitate accumulated simultaneously to produce red chert during the waning stage of submarine hydrothermal activity that was responsible for the Kunimiyama deposit. Consequently, the age of Kunimiyama stratiform ferromanganese deposit is constrained as middle Early Permian (middle Wolfcampian).     

Relationships of interannual variability in SST and phytoplankton blooms with giant jellyfish (Nemopilema nomurai) outbreaks in the Yellow Sea and East China Sea

Giant jellyfish (Nemopilema nomurai) outbreaks in relation to satellite sea surface temperature (SST) and chlorophyll-a concentrations (Chl-a) were investigated in the Yellow Sea and East China Sea (YECS) from 1998 to 2010. Temperature, eutrophication, and match–mismatch hypotheses were examined to explain long-term increases and recent reductions of N. nomurai outbreaks. We focused on the timing of SST reaching 15 °C, a critical temperature enabling polyps to induce strobilation and enabling released ephyra to grow. We analyzed the relationship of the timing with interannual variability of SST, Chl-a, and the timing of phytoplankton blooms. Different environmental characteristics among pre-jellyfish years (1998–2001), jellyfish years (2002–2007, 2009), and non-jellyfish years (2008, 2010) were assessed on this basis. The SST during late spring and early summer increased significantly from 1985 to 2007. This indicated that high SST is beneficial to the long-term increases in jellyfish outbreaks. SST was significantly lower in non-jellyfish years than in jellyfish years, suggesting that low SST might reduce the proliferation of N. nomurai. We identified three (winter, spring, and summer) major phytoplankton bloom regions and one summer decline region. Both Chl-a during non-blooming periods and the peak increased significantly from 1998 to 2010 in most of the YECS. This result indicates that eutrophication is beneficial to the long-term increases in jellyfish outbreaks. Timing of phytoplankton blooms varied interannually and spatially, and their match and mismatch to the timing of SST reaching 15 °C did not correspond to long-term increases in N. nomurai outbreaks and the recent absence.     

Third order wave force on axisymmetric bodies

The third order triple-frequency wave load on fixed axisymmetric bodies by monochromatic waves is considered within the frame of potential theory. Waves are assumed to be weak non-linearity and a perturbation method is used to expand velocity potentials and wave loadings into series according to a wave steepness of kA. Integral equation method is used to compute velocity potentials up to second order in wave steepness. The third order triple-frequency wave loads are computed by an indirect method and an efficient method is applied to form the third order forcing term on the free surface quickly. The method can be used to compute third order triple-frequency surge force, heave force and pitch moment on any revolution bodies with vertical axes. The comparison with Malenica and Molin's results is made on surge force on a uniform cylinder, and comparison with experimental results is made on third order surge force, heave force and pitch moment on a truncated cylinder. More numerical computations are carried out for third order forces and moments on a uniform cylinder, truncated cylinders and a hemisphere.     

Experimental study on the rheological properties of polycrystalline solid nitrogen and methane: Implications for tectonic processes on Triton

To investigate the evolution of any processes on planetary surfaces in the outer Solar System, the rheological properties of non-water ices were studied by means of a sound velocity measurement system and a uniaxial deformation apparatus. A pulse transmission method was used to obtain longitudinal (V_p) and transverse (V_s) wave velocities through solid nitrogen and methane at temperatures ranging from 5 to 64 K and from 5 to 90 K, respectively. The measured velocities confirmed that the solid methane and solid nitrogen samples were non-porous polycrystalline samples without any cracks and bubbles inside. Compression tests at constant strain-rate were performed for solid nitrogen and methane at temperatures of 5-56 K and 5-77 K, respectively, at strain-rates of 10⁻⁴-10⁻² s⁻¹. Both brittle and ductile behavior was observed for solid nitrogen and methane under these conditions. The maximum strength of solid nitrogen was observed to be 9 MPa in the brittle failure mode, and that of solid methane was 10 MPa. These low strengths cannot support cantaloupe structures with the topographic undulation larger than several kilometers found on Triton’s surface, suggesting that other materials such as H₂O ice could underlay solid methane and nitrogen and support these structures.