Geotechnical sealing material for coastal disposal facility for soils and wastes contaminated by radioactive cesium

Safe disposal of wastes produced due to the process of decontamination in and around Fukushima No. 1 nuclear power plant is an urgent requirement. The purpose of this study was to develop a sealing material which can be used as an engineered barrier for a final disposal facility for the soils and wastes contaminated by radioactive cesium. The analyses conducted based on 4-m-thick sealing layer revealed that the hydraulic conductivity of the sealing material needs to be kept below 5.0?×?10^?10?m/s to avoid the seepage of contaminants below the environmentally safe limits. Sealing material was developed using marine clay–bentonite mixture and the engineering characteristics were examined. The results of laboratory experiments showed that, with the addition of bentonite, the hydraulic conductivity equal to or less than 5.0?×?10^?10?m/s was achieved when the effective consolidation stress is equal to or more than 27?kPa. From the tests for adsorption properties for cesium, it was found that the sealing material showed the significant capacity of adsorption for cesium in seawater. It was concluded that the construction of waste disposal facility on the sandy seafloor is feasible using the sealing layer proposed in this study.     

Sealevel history recorded in the Pleistocene carbonate sequence in IODP Hole 310‐M0005D,off Tahiti

Material cored during the Integrated Ocean Drilling Program (IODP) Expedition 310 ‘Tahiti Sea Level’ revealed that the fossil reef systems around Tahiti are composed of two major stratigraphic sequences: (i) a last deglacial sequence; and (ii) an older Pleistocene sequence. The older Pleistocene carbonate sequence is composed of reef deposits associated with volcaniclastic sediments and was preserved in Hole 310‐M0005D drilled off Maraa. Within an approximately 70‐m‐thick older Pleistocene sequence (33.22–101.93 m below seafloor; 92.85–161.56 m below present sealevel) in this hole, 11 depositional units are defined by lithological changes, sedimentological features, and paleontological characteristics and are numbered sequentially from the top of the hole downward (Subunits P1–P11). Paleowater depths inferred from nongeniculate coralline algae, combined with those determined by using corals and larger foraminifers, suggest two major sealevel rises during the deposition of the older Pleistocene sequence. Of these, the second sealevel rise is associated with an intervening sealevel drop. It is likely that the second sealevel rise corresponds to that during Termination II (TII, the penultimate deglaciation, from Marine Isotope Stages 6 to 5e). Therefore, the intervening sealevel drop can be correlated with that known as the ‘sealevel reversal’ during TII. Because there are limited data on the Pleistocene reef systems in the tropical South Pacific Ocean, this study provides important information about Pleistocene sealevel history, the evolution of coral reef ecosystems, and the responses of coral reefs to Quaternary climate changes.     

Effects of Fetch on Turbulent Flow and Pollutant Dispersion Within a Cubical Canopy

The effects of fetch on turbulent flow and pollutant dispersion within a canopy formed by regularly-spaced cubical objects is investigated using large-eddy simulation. Six tracer gases are simultaneously released from a ground-level continuous pollutant line source placed parallel to the spanwise axis at the first, second, third, fifth, seventh and tenth rows. Beyond the seventh row, the standard deviations of the fluctuations in the velocity components and the Reynolds shear stresses reach nearly equivalent states. Low-frequency turbulent flow is generated near the bottom surface around the first row and develops as the fetch increases. The turbulent flow eventually passes through the canopy at a near-constant interval. The mean concentration within the canopy reaches a near-constant value beyond the seventh row. In the first and second rows, narrow coherent structures frequently affect the pollutant escape from the top of the canopy. These structures increase in width as the fetch increases, and they mainly affect the removal of pollutants from the canopy.     

Heat-Mitigation Effects of Irrigated Rice-Paddy Fields Under Changing Atmospheric Carbon Dioxide Based on a Coupled Atmosphere and Crop Energy-Balance Model

Boundary-Layer Meteorology - Known as the heat-mitigation effect, irrigated rice-paddy fields distribute a large fraction of their received energy to the latent heat during the growing season. The...     

Dynamical Features and Evolutional Characteristics of Brightening Coronal Loops

We present a detailed study of coronal loop brightenings observed in an active region on the solar limb. These brightening loops show expanding and shrinking motions in EUV coronal line images and also show downflow along the loops in Lα and Hα images. By means of time-slice analysis of the images, we found that both the expanding and shrinking motions of the loops are not real motions of plasma but apparent motions like post-flare loops, where the loops at the different height are successively heated and cooled. From a temperature analysis, the time delay between the brightenings of hot 195 Å and cool Lα loops is found to be nearly equal to the time-scale of the conduction cooling. We conclude that these loop brightenings are sources of so called Hα coronal rains.     

A hydrocode calculation coupled with reaction kinetics of carbon compounds within an impact vapor plume and its implications for cometary impacts on Galilean satellites

The synthesis of organic molecules via chemical reactions within impact vapor plumes has been proposed as a mechanism to supply organics on a planet. However, the kinetics of chemical reactions within a rapidly expanding vapor plume or quenching process of the reactions has not been studied extensively. In this study, we constructed a new numerical model that calculates kinetics of the entire chemical reactions within an impact vapor plume. Numerical results revealed that the semi-analytical models proposed so far, in which the final amount of a chemical species was given by the equilibrium abundance at the quenching temperature of the fastest reaction path involving the species, underestimates the yield of organic molecules, such as HCN, by up to a factor of 10. This is because the previously used assumption that a species can achieve equilibrium with the rest of the reaction system via the fastest reaction path involving the species is not necessarily valid. Our analysis of the high-temperature H/C/N/O reaction system suggests that the quenching of slow reactions divides the reaction network into smaller reaction sub-systems isolated from the rest of the reaction system. Then, the fastest reaction path cannot equilibrate an isolated reaction sub-system with the rest of the reaction system. Simulation of this actual disequilibrium mechanism requires a simultaneous numerical calculation of the entire reaction network, which is equivalent to conducting a full kinetic model calculation, such as our model. Our numerical code makes it possible to discuss quantitatively the impact chemistry for various situations, such as the Galilean satellites. In this study, our numerical model is applied to the delivery of organic molecules via cometary impact on the Galilean satellites. Our numerical results indicate that small-particle impacts would produce HCN efficiently. Resulting HCN may freeze out immediately and be deposited on satellite surfaces, where it may be eventually converted into complex organics via irradiation of charged particle. On the other hand, large-size impacts may form transient CH₄-N₂ atmospheres, in which complex organics (tholin) may be formed via energy deposition of UV and/or charged particle. Resulting complex organics may subsequently precipitate on the satellite surfaces without clear correlation with the locations of impact craters. Such distribution of complex organics created by chemical reactions within vapor plumes due to cometary impacts may explain an absorption (4.57 μm) on Galilean satellites nonassociated with observable (moderate- and large-size) impact craters.     

Observation of wave transformation on a sloping type B shore platform under wind-wave and swell conditions

An instrumented field study of the across-shore evolution of wave characteristics was conducted under wind-wave and swell-wave conditions on a sloping type B shore platform along the mesotidal, fetch-limited coast of Auckland, New Zealand, based on spectral analysis of hydrodynamic data recorded in pressure-sensor time series during a 24-h deployment on 24–25 November 2008. The results highlight the ability of the shore platform in dissipating wave energy reaching the cliff toe under wind-wave and swell-wave conditions, and the spectral redistribution of wave energy. As waves propagated onto the platform surface and towards the cliff toe, infragravity-wave energy became progressively more dominant, while gravity waves were dissipated. Wave height and period in the central sector of the platform and at the cliff toe were not markedly affected by differences in incident-wave conditions observed during the survey. The findings confirm the importance of platform morphology in modulating wave-energy delivery to the cliff toe. In contrast to previous studies, infragravity-wave height at the cliff toe did not appear to be correlated to incident-wave conditions.     

Climatic physical snowpack properties for large-scale modeling examined by observations and a physical model

Here we have conducted an integral study using site observations and a model with detailed snow dynamics, to examine the capability of the model for deriving a simple relationship between the density and thermal conductivity of the snowpack within different climatic zones used in large-scale climate modeling. Snow and meteorological observations were conducted at multiple sites in different climatic regions (two in Interior Alaska, two in Japan). A series of thermal conductivity measurements in snow pit observations done in Alaska provided useful information for constructing the relationship. The one-dimensional snow dynamics model, SNOWPACK, simulated the evolution of the snowpack and compared observations between all sites. Overall, model simulations tended to underestimate the density and overestimate the thermal conductivity, and failed to foster the relationship evident in the observations from the current and previous research. The causes for the deficiency were analyzed and discussed, regarding a low density of the new snow layer and a slow compaction rate. Our working relationships were compared to the equations derived by previous investigators. Discrepancy from the regression for the melting season observations in Alaska was found in common.     

Stratigraphy,chronology, and character of the 1976 pyroclastic eruption of Augustine volcano,Alaska

The chronology of deposits of the 1976 eruption of Augustine volcano, which produced pyroclastic falls, pyroclastic flows, and lava domes, is determined by correlating the stratigraphy with published records of seismicity, plume observations, and distant ash falls. Three thin air-fall ash beds (unit A1, A2 and A3) correlate with events near the beginning of the 1976 eruption on 22 and 23 January. On 24 January a small-volume, ash-cloud-surge deposit (unit S) accumulated over the north half of Augustine Island. A series of pumiceous pyroclastic flows represented by the lobate pumiceous deposits (unit F) occurred on 24 January and locally melted the snowpack to cause small pumice-laden floods. A thin ash bed (unit A4) was deposited on 24 January, and the main plinian eruption (unit P) occurred on 25 January. In middle to late February and again in mid April, lava domes were extruded at the summit accompanied by incandescent block-and-ash flows down the north flank. A hut near the north coast of the island was mechanically and thermally damaged by the small-volume ash-cloud surge of unit S before the eruption of the pumice flow of unit F; the metal roof was then penetrated by lithic fragments of the plinian fall of 25 January. Explosive eruptions in the early stage of an eruption-like that which deposited unit S — are important hazards at Augustine Island, as are infrequent debris avalanches and attendant tsunamis.deceased on 18 May 1980