Displacement distribution along minor fault traces

The variation of displacement along fifteen traces of minor normal faults was measured in the multilayered Quaternary sediments of Kyushu, Japan. In the diagrams of distance along a fault trace (L) vs displacement (D) two distinct types of faults, a cone-shaped L-D pattern (C-type) and mesa-shaped one (M-type), were detected. Because the L-D pattern is subject to slip-parallel strain in the wall rocks, a D-constant pattern is ascribed to the competent (rigid) material and a D-variable pattern is found in the incompetent material. Therefore, C-type faults are characteristic of homogeneous incompetent materials, whereas M-types are representative of faults that cut through a rigid unit. However, the steep slopes in the flanking sections of M-type patterns indicate that the faulting of a rigid unit should terminate in a strain absorber of incompetent materials. The concept of lithologic control in the L-D pattern is important for the better understanding of faulting processes as well as the localization of faults.     

Map projection errors in the Weber problem

 When demand points are given as a planar map where projection method is explicitly stated, we usually know the latitudes and longitudes of these points from the map. Then we can solve the Weber problem on the globe, and we do not suffer from errors. This paper analyses how cylindrical projections cause distortion in the Weber problem when demands are distributed on the Northern Hemisphere. First, we demonstrate that planar solutions are always located south of the spherical solution if the Mercator projection, the equirectangular projections with standard parallels near the demands, or the equal-area projection with the same characteristic is chosen. Second, we verify that this geographical tendency is inclined to hold when the demand points, are distributed symmetrically, widely or toward the north. Received: 15 August 2001 / Accepted: 20 April 2002 This paper was partially written while the first author was visiting the Department of Geography at the Catholic University of Louvain, Louvain-la-Neuve, Belgium [1993–1994]. He is grateful for the hospitality of this department. An earlier version of this paper was presented in 1994 at the Seventh Meeting of the European Operational Research Working Group on Locational Analysis in Brussels, and in 1996 at the Fifth World Congress of the Regional Science Association International in Tokyo. The authors would also like to thank the participants as well as three anonymous referees for their constructive comments.     

Propagating tsunami wave and subsequent resonant response signals detected by HF radar in the Kii Channel,Japan

Signals from the tsunami waves induced by the March 11, 2011 moment magnitude (M_w) 9.0 Tohoku-Oki earthquake and from subsequent resonances were detected as radial velocity variability by a high-frequency ocean surface radar (HF radar) installed on the eastern coast of the Kii Channel, at a range of about 1000 km from the epicenter along the eastern to southern coasts of Honshu Island. A time–distance diagram of band-passed (9–200 min) radial velocity along the beam reveals that the tsunami waves propagated from the continental shelf slope to the inner channel as progressive waves for the first three waves, and then natural oscillations were excited by the waves; and that the direction of the tsunami wave propagation and the axis of the natural oscillations differed from that of the radar beam. In addition, spectral analyses of the radial velocities and sea surface heights obtained in the channel and on the continental shelf slope suggest complex natural oscillation modes excited by the tsunami waves.     

Simulating the diurnal cycle of rainfall in global climate models: resolution versus parameterization

The effects of horizontal resolution and the treatment of convection on simulation of the diurnal cycle of precipitation during boreal summer are analyzed in several innovative weather and climate model integrations. The simulations include: season-long integrations of the Non-hydrostatic Icosahedral Atmospheric Model (NICAM) with explicit clouds and convection; year-long integrations of the operational Integrated Forecast System (IFS) from the European Centre for Medium-range Weather Forecasts at three resolutions (125, 39 and 16 km); seasonal simulations of the same model at 10 km resolution; and seasonal simulations of the National Center for Atmospheric Research (NCAR) low-resolution climate model with and without an embedded two-dimensional cloud-resolving model in each grid box. NICAM with explicit convection simulates best the phase of the diurnal cycle, as well as many regional features such as rainfall triggered by advancing sea breezes or high topography. However, NICAM greatly overestimates mean rainfall and the magnitude of the diurnal cycle. Introduction of an embedded cloud model within the NCAR model significantly improves global statistics of the seasonal mean and diurnal cycle of rainfall, as well as many regional features. However, errors often remain larger than for the other higher-resolution models. Increasing resolution alone has little impact on the timing of daily rainfall in IFS with parameterized convection, yet the amplitude of the diurnal cycle does improve along with the representation of mean rainfall. Variations during the day in atmospheric prognostic fields appear quite similar among models, suggesting that the distinctive treatments of model physics account for the differences in representing the diurnal cycle of precipitation.     

Graphitization of carbonaceous matter during metamorphism with references to carbonate and pelitic rocks of contact and regional metamorphisms,Japan

This study is an attempt to correlate the graphitization process of carbonaceous matter during metamorphism with metamorphic grade. Graphitization can be parameterized using crystal structure and chemical and isotopic compositions. The extent of graphitization could be characterized mainly by temperature, duration of metamorphism and rock composition. We compared the graphitization trends for two metamorphic terrains, a contact aureole of the Kasuga area and a regional metamorphic terrain of high-temperature/low pressure type of the Ryoke metamorphic terrain in Northern Kiso area, Central Japan, and for two different lithologies (carbonate and pelite), using X-ray diffractogram, DTA-TG analysis, and chemical and stable isotope analyses. During contact metamorphism, graphitization and carbon isotopic exchange reactions proceeded simultaneously in pelitic and carbonate rocks. The decreases in basal spacing d(002) of the carbonaceous matter in carbonate rocks is greatly accelerated at temperatures higher than about 400° C. Furthermore, carbon isotopic ratios of graphite in carbonate rocks also change to ¹³C-enriched values implying exchange with carbonates. The beginning of this enrichment of ¹³C in the carbonaceous matter coincides with an abrupt increase of the graphitization processes. Carbon isotopic shifting up to 5 in pelites could be observed as metamorphic temperature increased probably by about 400° C. Carbonaceous matter in pelitic rocks is sometimes a mixture of poorly crystallized organic matter and well-crystallized graphite detritus. DTA-TG analysis is an effective tool for the distinction of detrital graphitic material. Two sources for the original carbon isotopic composition of carbonaceous matter in pelites in the Kasuga contact aureole can be distinguished, about-28 and-24 regardless of the presence of detrital graphite, and were mainly controlled by depositional environment of the sediments. Graphitization in limestones and pelitic rocks in regional metamorphism proceeds further than in a contact aureole. In the low-temperature range, the differences in extent of graphitization between the two metamorphic regions is large. However, at temperatures higher than 600° C, the extent of graphitization in both regions is indistinguishable. The degree of graphitization is different in limestones and pelitic rocks from the Ryoke metamorphic terrain. We demonstrate that the graphitization involves a progressive re-construction process of the crystal structure. The sequence of the first appearance of crystal inter planar spacing correlates with the metamorphic grade and indicates the crystal growth of three-dimensional structured graphite.     

Biogenic opal production changes during the Mid-Pleistocene Transition in the Bering Sea (IODP Expedition 323 Site U1343)

Biogenic opal content and mass accumulation rate (MAR) at IODP Expedition 323 Site U1343 were found to fluctuate consistently, generally being high under warm conditions and low under cold conditions during the last 2.4 Ma. Continuous wavelet transform analysis of the normalized biogenic opal content indicates that export production in the Bering Sea varied predominantly at 41-ka periodicity before 1.25 Ma, and shifted to 100-ka periodicity at the onset of the Mid-Pleistocene Transition (MPT; 1.25–0.7 Ma). The 100-ka cycles dominated until the Holocene. Export production in the Bering Sea decreased markedly in the Bering Sea two times during the MPT: the first occurred at the beginning of the MPT (1.25 Ma) and the second in the middle of the MPT (0.9 Ma). These decreases coincided with both increases in the relative abundance of sea-ice diatoms and decreases in the warm-water diatom species Neodenticula seminae, indicating that reductions in export production in the Bering Sea during the MPT were associated with climate cooling. Decreases in export production in the Bering Sea during the MPT were most likely associated with the increased influence of polar/Arctic domains on the high-latitude North Pacific.     

Maintenance of the mean kinetic energy in the global ocean by the barotropic and baroclinic energy routes: the roles of JEBAR and Ekman dynamics

In order to determine the maintenance mechanisms of the currents of the global ocean, this study investigates the budget of the annual mean kinetic energy (KE) in a high-resolution (0.1° × 0.1°) semi-global ocean simulation. The analysis is based on a separation of the mean KE using the barotropic (i.e., depth-averaged) and baroclinic (the residual) components of velocity. The barotropic and baroclinic KEs dominate in higher and lower latitudes, respectively, with their global average being comparable to each other. The working rates of wind forcing on the barotropic and baroclinic circulations in the global ocean are 243 and 747 gigawatts, respectively. This study presents at least three new results for the budget of the barotropic KE. Firstly, an energy diagram is rederived to show that the work of the barotropic component of the horizontal pressure gradient (HPG) is connected to the work related to the joint effect of baroclinicity and bottom relief (JEBAR), and then to the budget of potential energy (PE). Secondly, the model analysis shows that the globally averaged work of the barotropic HPG (which is connected to the work related to JEBAR and then to the budget of the PE) is nearly zero. This indicates that the wind- and buoyancy-induced barotropic circulations in the global ocean are of the same strength with opposite sign. Thirdly, it is found that the work of the wind forcing on the barotropic component of the simulated Antarctic Circumpolar Current (ACC) is canceled by the combined effect, in equal measure, of the work of the barotropic HPG and the work of dissipative processes for mean KE. This result makes a significant contribution to the discussion on the depth-integrated momentum balance of the ACC. The barotropic KE is dissipated by the effects of bottom frictional stress, lateral frictional stress, and the Reynolds stress, of which more than half is attributed to an unexpectedly large contribution from biharmonic horizontal friction. Future studies should pay more attention to the role of biharmonic friction used in high-resolution numerical models.     

Surface Albedo in Cities: Case Study in Sapporo and Tokyo,Japan

The surface albedo of two large cities in Japan was measured using a pyranometer mounted on a helicopter to avoid the bidirectional reflectance distribution. The daytime albedo was 0.12 in the cities, which was less than that of a nearby forest (0.16). The albedo was dependent on building structure in the cities; the albedo was lower in areas with more buildings, and decreased as the aspect ratio of street canyons increased. There are two reasons for this dependency: the multiple reflection of radiation in the building canopy, as has been shown in many previous studies, and the sparse vegetation in urban areas. These two factors concurrently determine the albedo in a real city, where the vegetation amount decreases as the plan roof ratio increases.     

Uptake and biological effects of synthetic glucocorticoids in common carp (Cyprinus carpio)

Uptake and biological effects of synthetic glucocorticoids (GCs) were analyzed using common carp (Cyprinus carpio). Fish were exposed to clobetasol propionate (CP) or clobetasone butyrate (CB) individually or in mixture at 1 μg L⁻¹ for 21 days. Bioconcentration factor (BCF) of CB was calculated as 100, and BCF of CP was less than 16. No effects were found in fish erythrocyte and leukocyte numbers and serum glucose levels after exposure to the selected GCs. On the other hand, serum concentrations of free amino acids significantly increased in GC-exposed groups. Thus, exposures to synthetic GCs at relatively low concentrations seemed to cause enhancement of protein degradation and subsequent increase of serum free amino acids without a corresponding increase in serum glucose levels, an effect which might be related to partial induction of gluconeogenesis by GC.