Multi‐sensor Image Maps from SPOT,ERS and JERS

Abstract

Image mapping using data from visible and infrared sensors has, as a major drawback, the frequent cloud cover experienced in many countries. This is one of the main reasons why topographic maps at 1:100,000 scale and larger are often outdated. The results of a study which investigated the possibilities of fusing up‐to‐date spaceborne microwave data with existing images from optical sensors for topographic map updating at a scale of 1:100, 000 are presented in this paper. A key issue researched was the influence of geometric distortions and corrections of remote sensing data on the results of pixel based digital image fusion. After having terrain‐geocoded and radiometrically enhanced imagery from the Landsat, SPOT, ERS‐1 and JERS‐1 satellites, the data were fused applying a variety of colour transformation techniques as well as statistical or arithmetic methods. Initially, the image fusion was implemented using images covering a test site in the north of The Netherlands in order to calibrate specified combinations and techniques in a rather flat area. With the experience gained, the remote sensing data acquired over the research site were processed. The research test site is located in a typical Developing Country in the humid Tropics, on the mountainous south‐west coast of Sumatra in Indonesia. The results of the various applied techniques and image combinations were evaluated with reference to their capability to overcome the cloud cover problem. New combinations of techniques and images were developed as result of an optimisation process. The research produced two prototypes of annotated 1:100,000 scale image maps containing fused, cloud‐free optical/microwave imagery.     

Multi‐Season Atmospheric Normalization of NOAA AVHRR Derived NDVI for Crop Yield Modeling

Abstract

A methodology has been developed to normalize the multi‐temporal NDVIs derived from NOAA AVHRR data for the atmospheric effects to the least affected NDVI for development of spectral and spectrometeorological (or spectromet, for short) crop yield models. This is found to reduce the noise in NDVI due to varying atmospheric conditions from season to season and improve the predictability of statistical multiple linear regression yield models. The spectromet yield models for mustard crop in the nine districts of Rajasthan state haven been developed based on normalized NDVIs and have been validated by comparing the predicted yields with the estimated from crop cutting experiments by the state Development of Agriculture.     

无定向点的碎部测量方法

提出一种在测站没有定向点的情况下,利用全站仪进行碎部测量的作业方法,阐述该方法的作业过程、精度情况和注意事项,为解决全野外数字测图过程中经常遇到的由于控制点无通视方向而影响碎部测量作业的问题提供了有效途径。     

DLG产品版权标记技术研究综述

数字线划地图(DLG)产品因其生产成本高昂、精度高,与经济发展和国防安全大局息息相关,其版权保护问题意义重大。以数字水印为代表的版权标记技术是DLG产品目前主要的版权保护技术。基于进一步研究与应用需要,从版权标记理论基础、标记生成、标记嵌入、标记检测以及实时操作监控等五个方面,综述当前应用版权标记技术对DLG数据产品进行版权保护的现状及发展趋势。     

Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

Atmospheric Artifact Compensation in Ground-Based DInSAR Applications

In this letter, a coherence-based technique for atmospheric artifact removal in ground-based (GB) zero-baseline synthetic aperture radar (SAR) acquisitions is proposed. For this purpose, polarimetric measurements acquired using the GB-SAR sensor developed at the Universitat Politecnica de Catalunya are employed. The heterogeneous environment of Collserola Park in the outskirts of Barcelona, Spain, was selected as the test area. Data sets were acquired at X-band during one week in June 2005. The effects of the atmosphere variations between successive zero-baseline SAR polarimetric acquisitions are treated here in detail. The need to compensate for the resulting phase-difference errors when retrieving interferometric information is put forward. A compensation technique is then proposed and evaluated using the control points placed inside the observed scene.     

Motion Analysis in SAR Images of Unfocused Objects Using Time–Frequency Methods

Synthetic aperture radar (SAR) image formation processing assumes that the scene is stationary, and to focus an object, one coherently sums a large number of independent returns. Any target motion introduces phases that distort and/or translate the target's image. Target motion produces a smear primarily in the azimuth direction of the SAR image. Time-frequency (TF) modeling is used to analyze and correct the residual phase distortions. An interactive focusing algorithm based on TF modeling demonstrates how to correct the phase and to rapidly focus the mover. This is demonstrated on two watercraft observed in a SAR image. Then, two time-frequency representations (TFRs) are applied to estimate the motion parameters of the movers or refocus them or both. The first is the short-time Fourier transform, from which a velocity profile is constructed based on the length of the smear. The second TFR is the time-frequency distribution series, which is a robust derivative of the Wigner-Ville distribution that works well in this SAR environment. The smear is a modulated chirp, from which a velocity profile is plotted and the phase corrections are integrated to focus the movers. The relationship between these two methods is discussed. Both methods show good agreement on the example.     

Modeling long-period noise in kinematic GPS applications

We develop and test an algorithm for modeling and removing elevation error in kinematic GPS trajectories in the context of a kinematic GPS survey of the salar de Uyuni, Bolivia. Noise in the kinematic trajectory ranges over 15 cm and is highly autocorrelated, resulting in significant contamination of the topographic signal. We solve for a noise model using crossover differences at trajectory intersections as constraints in a least-squares inversion. Validation of the model using multiple realizations of synthetic/simulated noise shows an average decrease in root-mean-square-error (RMSE) by a factor of four. Applying the model to data from the salar de Uyuni survey, we find that crossover differences drop by a factor of eight (from an RMSE of 5.6 to 0.7 cm), and previously obscured topographic features are revealed in a plan view of the corrected trajectory. We believe that this algorithm can be successfully adapted to other survey methods that employ kinematic GPS for positioning.     

Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.