Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Numerical Calculation of Equivalent Cell Permeability Tensors for General Quadrilateral Control Volumes

A new method for upscaling fine scale permeability fields to general quadrilateral-shaped coarse cells is presented. The procedure, referred to as the conforming scale up method, applies a triangle-based finite element technique, capable of accurately resolving both the coarse cell geometry and the subgrid heterogeneity, to the solution of the local fine scale problem. An appropriate averaging of this solution provides the equivalent permeability tensor for the coarse scale quadrilateral cell. The general level of accuracy of the technique is demonstrated through application to a number of flow problems. The real strength of the conforming scale up method is demonstrated when the method is applied in conjunction with a flow-based gridding technique. In this case, the approach is shown to provide results that are significantly more accurate than those obtained using standard techniques.     

四川省房屋建筑易损性研究

研究房屋建筑易损性特征是防震减灾工作必不可少的环节之一，本文通过对多年工作的系统总结，得出四川省不同地区的房屋建筑易损性矩阵，全省房屋建筑抗震性能总体水平不高，这是造成地震灾害加重的主要原因之一，随着经济发展实力的提高，适当提高全省房屋建筑抗震设防水平可大大减轻特别是中强地震所造成的经济损失。     

用现今小震推断洪洞、临汾两次历史大震的震源断层

山西临汾地区是一个历史强震多发区，1303年和1695年发生了洪洞（M＝8）和临汾（M＝73／4）两次特大地震，这两次地震所在区域至今仍在持续不断的小地震活动，具有明显的大震区地震长期活动特征，我们对临汾无线传输地震台网记录的1987－1999年期间发生的1670次中，小地震重新进行了震源定位，根据对这些地震震源位置三维空间分布特征和震源机解制的分析，认为洪洞地震的震源断层应是长80km，埋深5－26km的NNE走向，高倾角的右旋走滑型断层，而临汾地震的震源断层是长70km，埋深5－22km的NWW走向，高倾角的左旋走滑型断层。这与洪洞，临汾两次大震极震区的等震线及该地区应力场的构造环境是吻合的。     

漾濞地震震源位置分析

采用一致的地震震相和台网布局，应用昆明数字地震台网资料，对2002年月1月4日－1月7日的漾濞地震及序列作进一步核定，得出了更精确的地震震源位置，并作出三维空间图。     

隔震及超高层建筑的地震反应观测

2001年5月24日和6月20日分别发生了宜良4.2级和呈南3.6级两次地震，架设在云南省抗震培训中心隔震大楼和昆明佳华广场的结构强震观测台阵记录了这两栋建筑物对这两次地震反应。本介绍了获取的记录，并分析了两栋建筑物的地震反应情况。     

数字化射线照相技术对轻物质的判断

本文介绍了数字化射线照相技术对轻物质进行判断的方法。经实践证明，该方法是合理和有效的，可大大增强对轻物质的识别能力，是一种非常可行的识别技术。     

2001年四川省雅江-康定6.0级地震烈度考察及发震构造背景雏议

2001年2月23日四川省发生的6.0级地震，其宏观震中位于雅江县与康定县之间的高山峡谷地带．极震区烈度可达Ⅷ 度，Ⅷ 度区、Ⅶ 度区和Ⅵ 度区面积分别为180km2，1472 km2和3998 km2，等震线分布总体形态呈椭圆形，长轴近南北向．震区建筑物普遍受损，极震区山地灾害较为严重．初步分析认为，此次地震的发生与理塘断裂和玉农希断裂的长期活动有关，主干断裂活动造成的地壳应力调整和集中，最终在块体内部的次级断裂上释放而产生地震．      

企业地震预警系统应用研究

在充分调研国外地震预警系统现状的基础上，进行了地震预警系统的研究，研制了相应的数据分析软件。采用数字化观测技术、GIS技术等高新技术，在中国石油天然气股份有限公司大连分公司建立了地震预警试验系统，并将该地震预警系统与地震应急系统相连，为今后开展类似工作积累了经验。     

南水北调中线工程建设与河南水资源可持续利用

文章通过对河南省水资源开发利用现状，存在的主要问题，水资源供需平衡以及南水北调工程对河南省水资源利用的影响论述，提出了在拟定南水北调工程供水方案中，应通过强化节水，加强水资源保护，严格控制地下水开采，将水资源作为商品等措施，促进河南省水资源的可持续开发利用。