基于高分辨率遥感影像的林地变化检测方法研究

本文采用2013年QuickBird和2017年GF-1卫星遥感影像,以黑龙江省五常市为研究区,利用遥感影像的光谱特征提取纯净森林像元,构建整合森林指数(Integrated Forest Z-Score,IFZ)对影像的森林和非森林区域进行区分,叠加对比分析两期影像提取结果,得到研究区内林地的变化区域.再将自动提取结果与人工判读图斑进行精度验证,面积误差为4.2％,图斑重叠率为85％.从精度结果可知,高分辨遥感影像可以准确地监测林地变化,对研究环境变化和森林经营管理具有决策性作用.     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

Slip-weakening constitutive relation and the structure in the vicinity of a shear crack tip

Shear-crack model with a cohesive zone (or breakdown zone) is appropriate for the analysis of a fault surface in which slip distribution is strongly nonuniform. As the slipped portion advances, slip-weakening occurs over the so-called cohesive zone, a distance behind the fault tip. For a prescribed strength vs. displacement constitutive relation, however, the zone structure is difficult to determine by an analytical method except for some simple cases, thus it often requires a certain numerical procedure. This work proposes a numerical procedure to obtain approximated solutions of the problem by combining a series of elastic solutions derived bySmith (1974). The series is linearly combined and the unknown coefficients are determined by a nonlinear least square method. This method can fit a wide range of prescribed strength vs. displacement relations which may be simple algebraic relations or curves obtained by laboratory tests. By examining the residual errors and in comparison with a derived result in which linear stress is assumed within the zone, it could be concluded that the results provide good accuracy. Moreover, because the results are written in formulae, they can be easily referred to or used. By fitting constitutive curves in many different shapes, it is found that the stress distribution within the zone is more sensitive to the constitutive curve shape than the displacement. The most interesting fact is that the zone size is not sensitive to the curve shape, i.e., the zone size can be estimated by $$R = 3\mu \zeta \upsilon _c /\{ 2(1 - \upsilon )(\tau _c - \tau _f )\}$$ with ζ=1±0.11 for most cases.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

Indium Enrichment in the Meng'entaolegai Ag-Pb-Zn Deposit, Inner Mongolia, China

Abstract. The Meng'entaolegai In-rich Ag-Pb-Zn deposit is located in the eastern part of Inner Mongolia. It is one of the In-richest deposits in China. Large amounts of quartz and sulfide minerals constitute a hydrothermal quartz-sulfide vein deposit within a Hercynian acidic granite massif, which occupies an area of about 400 km². Thirty-six orebodies, controlled strictly by the E-W trend faults, are found in the orefield of 6 km in length from east to west and 200 to 1,000 m in width from south to north. The ore minerals are mainly galena, sphalerite and pyrite, and subordinate chalcopyrite, arsenopyrite, cassiterite and stannite with many Ag-minerals. The gangue minerals are mainly quartz, calcite, sericite and chlorite. Economic components of the deposit are dominated by Pb andZn (reserves of Pb and Zn are 0.17 Mt and 0.37 Mt, and their grades are 1 % and 2.3 %, respectively), with Ag, Sn, In and Cd (1,800 t Ag, >2,000 t Sn, >500 t In and 1,800 t Cd) as by-products. Indium is highly enriched in ores and its contents are 9 to 295 ppm in ores and 85 to 2,660 ppm in sphalerite. Analytical results show that the ore-forming fluid of this deposit contains 0.8–3.5 ppm In and 4–36 ppm Sn, and the two elements show a very good positive correlation with a correlation coefficient of 0.8672, while the correlation between In and Zn in the ore-forming fluids, with a correlation coefficient of 0.5723, is not as good as that between In and Sn. This indicates that indium has an affinity with tin in the ore-forming fluids. The authors think that this is probably the main reason why those In-rich deposits spread over the world are simultaneously enriched in tin.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

吉林伊通盆地莫里青断陷古近系双阳组储集层成岩作用研究

古近系双阳组是在吉林省伊通盆地莫里青断陷中，油气赋存的主要层位,储层主要为湖底扇和扇三角洲的砂体。依据双阳组储层的大量薄片、扫描电镜、粘土矿物分析的资料研究了该储集层的成岩作用。研究结果表明双阳组储集层：成岩作用经历了压实、压溶、胶结、交代和溶解6方面的作用。双储集层中的自生粘土矿物蒙皂石向伊利石转化具有明显的特征：主要演化过程经历了蒙皂石渐变带，第一迅速转化带和第二迅速转化带，相应的成岩作用阶段可划分为早成岩阶段B期、晚成岩阶段A1期和晚成岩阶段A2期。依据在垂向上的成岩变化,建立了莫里青断陷双阳组储集层的成岩作用演化序列。在垂向上成岩作用的类型和强度均存在明显的差异，造成了储层物性的垂向分带。     

龙永煤田危机矿山资源接替的几种勘探模式

通过龙永煤田现有煤矿状况调查分析发现：许多矿井已步入“花甲之年”，接近矿井服务年限。为了保障我省能源安全，应当采用有效勘探方法，方能使它们“返老还童”。研究发现危机矿山延长服务年限的几种勘探模式是：其一为扩大（延伸）勘探模式；其二为小型井田（块段）勘探模式；其三为资料分析研究模式。经探采对比发现，采用这三种勘探模式后，产生了巨大的经济效益，使一大批老矿井青春再度焕发。     

华南下寒武统镍钼矿层中铜铅锌矿物的发现及意义

华南扬子地块是我国古热水沉积成矿作用最为发育的地区之一,其热水沉积特性最早引起我国学者的关注。华南下寒武统黑色岩系中赋存多个与热水沉积成矿作用相关的大型、超大型重晶石矿床与N i-Mo-U-V多金属富集层。进一步研究分布在华南扬子地块黑色岩系中的金属、非金属矿床成因及其地球化学特征,对认识华南乃至全球晚震旦—早寒武世生物与环境演化有着十分重要的意义。本文对华南下寒武统镍-钼富集层矿石进行电子探针研究,识别出黄铜矿、黝铜矿等铜的独立矿物;闪锌矿等锌的独立矿物;方铅矿、白铅矿等铅的独立矿物。研究表明,在镍-钼矿石中这些矿物的发现为镍-钼矿层是热水沉积作用产物提供了直接的矿物学证据。