鄂尔多斯盆地靖边气田马五_(1+2)气藏储集单元研究

综合地震、地质、测井等信息,考虑沉积、成岩、地貌、生产动态等多因素,在沟槽识别和致密带研究基础上,通过井间干扰、油层压力变化和试井边界响应分析,按照局部、就近原则对靖边气田马五1+2气藏进行了储集单元划分。共划分出111个储集单元,其中独立型69个,复合型42个。这些储集单元的面积多介于10～50km2之间,单个储集单元的井数一般少于6口。在对气藏储层特征综合认识的基础上,确定流动单元划分思路与流程,并认为关键环节包括古沟槽识别、致密带研究、动静结合确定储集单元等3个方面。储集单元一方面受控于被致密岩相包围的有利成岩相带,宏观上与弱—中等充填泥粉晶白云岩相对应性好;另一方面又受各级古沟槽夹持,在两个一级古沟槽之间往往共生多个储集单元,而这些储集单元边界又严格地受二级或三级沟槽切割控制。     

POPULATION EXPANSION IN CHINA''''S METROPOLISES AND ITS SCALE-CONTROL

Metropolises are centers of politics, economy, culture and information, and also economic growth poles in comparatively large areas. After 1949, China's urban structure have changed greatly, from original "pyramid" shape into "upside -down pyramid" shape, that is, more megalopolises and metropolises, fewer medium-sized and small cities. The most distinguishing feature of urban population growth was the remarkable increase of population in megalopolises and metropolises. The key reason for urban population expansion is to want to obtain the benefits of scale -agglomeration economy of metropolises. The number of urban functions directly determines the quality and quantity of urban population. Metropolises appeal not only agricultural population but also the population of medium-sized and small cities, which put much more population pressure on metropolises. The ideal goals of scale-control of metropolitan population are discussed in terms of economy, society and ecollogy. In order to control the metropoli     

Objective prism survey of qsos in the field centered at 10h40m + 00°00′

QSO objective prism survey was done for the field centered at 10^h40^m + 00°00. For the 348 objects selected, we present in this paper their positions,B _J magnitudes, spectra, and finding charts. Based on the sample containing 163 QSO candidates with higher reliabilities (F 3), the surface density of QSO candidates withB _J 20 is estimated to be about 4.5 per square degree.Work based on UKST plates.     

相律的应用:蒸发结晶过程自由度

在连续原理和浓度限制条件的基础上,分析了卤水蒸发过程的自由度,提出了“蒸发结晶过程自由度”这一概念。发现蒸发结晶过程自由度在整个过程中不是1便是0,在1和0之间交替变化,与选择的组分数和析出固相数目无关。蒸发结晶过程自由度为1,物理意义是在不引起新相产生旧相不消失的前提下过程连续地变化(水分的连续蒸失),几何意义是指在适当的坐标系中的一条线,一条直线或曲线;0的物理意义是指新相的产生和旧相的即将消失或者前一段的连续变化过渡到后一段的连续变化,几何意义是指一点,两蒸发阶段的交点或者过程的终点。简单地讨论了过程的单向性和连续件。     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

Slip-weakening constitutive relation and the structure in the vicinity of a shear crack tip

Shear-crack model with a cohesive zone (or breakdown zone) is appropriate for the analysis of a fault surface in which slip distribution is strongly nonuniform. As the slipped portion advances, slip-weakening occurs over the so-called cohesive zone, a distance behind the fault tip. For a prescribed strength vs. displacement constitutive relation, however, the zone structure is difficult to determine by an analytical method except for some simple cases, thus it often requires a certain numerical procedure. This work proposes a numerical procedure to obtain approximated solutions of the problem by combining a series of elastic solutions derived bySmith (1974). The series is linearly combined and the unknown coefficients are determined by a nonlinear least square method. This method can fit a wide range of prescribed strength vs. displacement relations which may be simple algebraic relations or curves obtained by laboratory tests. By examining the residual errors and in comparison with a derived result in which linear stress is assumed within the zone, it could be concluded that the results provide good accuracy. Moreover, because the results are written in formulae, they can be easily referred to or used. By fitting constitutive curves in many different shapes, it is found that the stress distribution within the zone is more sensitive to the constitutive curve shape than the displacement. The most interesting fact is that the zone size is not sensitive to the curve shape, i.e., the zone size can be estimated by $$R = 3\mu \zeta \upsilon _c /\{ 2(1 - \upsilon )(\tau _c - \tau _f )\}$$ with ζ=1±0.11 for most cases.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

龙永煤田危机矿山资源接替的几种勘探模式

通过龙永煤田现有煤矿状况调查分析发现：许多矿井已步入“花甲之年”，接近矿井服务年限。为了保障我省能源安全，应当采用有效勘探方法，方能使它们“返老还童”。研究发现危机矿山延长服务年限的几种勘探模式是：其一为扩大（延伸）勘探模式；其二为小型井田（块段）勘探模式；其三为资料分析研究模式。经探采对比发现，采用这三种勘探模式后，产生了巨大的经济效益，使一大批老矿井青春再度焕发。     

REE characteristics of the Fanshan alunite deposit in Zhejiang Province, China

1 Introduction Alunite [KAl3(SO4)2(OH)6] is a very important non-ferrous metal resource, so many countries throughout the world have made great investments in research on the mechanism of its formation, its geological characteristics and applications. O…     

广东河源盆地蛋化石

河源盆地沉积了白垩系-古近系，笔者将这套地层划分为3个岩石地层单位，新建仙塘组和东源组，沿用格岭组。在河源除发现恐龙骨骼、恐龙脚印、龟鳖化石外，于白垩系东源组中还产有大量蛋化石。该组蛋化石的分布，下部以圆形蛋为主，中-上部多见长形蛋。报道了三王坝村副圆形蛋(新种)Paraspheroolithus sanwangbacunensis Fang sp．nov．、风光村树枝蛋(新种)Dendroolithus fengguangcunensis Fang sp．nov．和瑶屯巨形蛋Macroolithus yaotunensis、长形长形蛋Elongatoolithus elongates。