A 256×256 pixel InSb FPA for SIRTF and other astronomical applications

As part of the NASA Space Infrared telescope Facility (SIRTF), a low noise multiplexer has been developed. The hybridization of this multiplexer to a high indium antimonide (InSb) photodiode array has resulted in a MWIR detector of outstanding performance. The multiplexer is made of a 256×256 array of source follower amplifiers on a 30 m square pitch. Random access binary decoders are used to access each pixel of the array, allowing any read-out scheme to be implemented. Dark current has been measured at temperatures ranging from 4K to 77K. Generation recombination currents dominate above 45K. With 100mV of reverse bias applied, less than 3×10^-17 A is typical below 50K with 8×10^-19 A (5 e^-/s) at 4K. Under the same conditions 0.25 pA was measured at 77K. Read noise has been measured as low as 186 e^- using non-correlated techniques. Detector QE is 50 to 80 % through the entire 1 to 5 m band.     

Two Offner-based IR camera optical designs

Tracing results for two designs based on the Offner reimager are given: a practical 256×256 NICMOS-3 IR/CCD I-K camera designed for use on a f/13.5 1-m telescope yielding a 154×154 field, and a hypothetical 1024×1024 pixel nextgeneration IR camera for a f/7.5 2.5-m telescope yielding a 244×244 field. Both designs produce near-diffration limited results.     

Relationships of photosynthetically active radiation and shortwave irradiance

Summary Hourly measurements of solar irradiance in the wave band excluding photosynthetically active radiation (PAR) and solar irradiance (SI) were made over a 12-month period at the National Observatory of Athens, for obtaining the ratios of PAR to SI. These irradiance ratios exhibit dependence on sky conditions, with slightly larger values being observed under cloudy skies and seasonal variations, attributable to changes in local air mass climatology. The highest values have been obtained during the growing season (April–September). The mean annual value of 0.473 observed for the irradiance ratio in the PAR band compares favorably with values reported in the literature for different locations over a wide geographical area.With 2 Figures     

Correlation methods in fingerprint detection studies

This investigation addresses two general issues regarding the role of pattern similarity statistics in greenhouse warming detection studies: normalization, and the relative merits of centered versus uncentered statistics. A pattern correlation statistic is used to search for the greenhouse warming signals predicted by five different models in the observed records of land and ocean surface temperature changes. Two forms of this statistic were computed: R (t), which makes use of nonnormalized data, and (t), which employs point-wise normalized data in order to focus the search on regions where the signal-to-noise ratio is large. While there are no trends in the R (t) time series, the time series of (t) show large positive trends. However, it is not possible to infer from the (t) results that the observed pattern of temperature change is, in fact, becoming increasingly similar to the model-predicted signal. This is because point-wise normalization of the observed and simulated mean change fields by a single common field introduces a common factor effect, which means that the quantities being compared should show some similarity a priori. This does not necessarily make normalization inapplicable, because the detection test involves seeking a trend in the similarity statistic. We show, however, that trends in (t) must arise almost completely from the observed data, and cannot be an indicator of increasing observed data/signal similarity. We also compare the information provided by centered statistics such as R(t) and the uncentered C(t) statistic introduced by Barnett. We show that C(t) may be expressed as the weighted sum of two terms, one proportional to R(t) and the other proportional to the observed spatial mean. For near-surface temperatures, the spatial average term dominates over the R(t) term. In this case the use of C(t) is equivalent to the use of spatial-mean temperature. We conclude that at present, the most informative pattern correlation statistic for detection purposes is R(t), the standard product-moment correlation coefficient between the observed and model fields. Our failure to find meaningful trends in R(t) may be due to the fact that the signal is being obscured by the background noise of natural variability, and/or because of incorrect model signals or sensitivities.     

Biogeochemical cycles of carbon, sulfur, and free oxygen in a microbial mat

Complete budgets for carbon and oxygen have been constructed for cyanobacterial mats dominated by Microcoleus chthonoplastes from the evaporating ponds of a salt works located in Guerrero Negro, Baja California Sur, Mexico. Included in the budget are measured rates of O2 production, sulfate reduction, and elemental exchange across the mat/brine interface, day and night, at various temperatures and times of the year. We infer from this data the various sinks for O2, as well as the sources of carbon for primary production. To summarize, although seasonal variability exists, a major percentage of the O2 produced during the day did not diffuse out of the mat but was used within the mat to oxidize both organic carbon and the sulfide produced by sulfate reduction. At night, most of the O2 that diffused into the mat was used to oxidize sulfide, with O2 respiration of minor importance. During the day, the internal mat processes of sulfate reduction and O2 respiration generated as much or more inorganic carbon (DIC) for primary production as diffusion into the mat. Also, oxygenic photosynthesis was the most important process of carbon fixation, although anoxygenic photosynthesis may have been important at low light levels during some times of the year. At night, the DIC lost from the mat was mostly from sulfate reduction. Elemental fluxes across the mat/brine interface indicated that carbon with an oxidation state of greater than zero was taken up by the mat during the day and liberated from the mat at night. Overall, carbon with an average oxidation state of near zero accumulated in the mat. Both carbon fixation and carbon oxidation rates varied with temperature by a similar amount. These mats are thus closely coupled systems where rapid rates of photosynthesis both require and fuel rapid rates of heterotrophic carbon oxidation.     

The concentration and isotopic composition of carbon in basaltic glasses from the Juan de Fuca Ridge, Pacific Ocean

The abundance and 13C/12C ratios of carbon were analyzed in basaltic glass from twenty locations along the Juan de Fuca Ridge using a 3-step combustion/extraction technique. Carbon released during the first two combustion steps at 400-500 degrees C and 600-650 degrees C is interpreted to be secondary, and only the carbon recovered during a final combustion step at approximately 1200 degrees C is thought to be indigenous to the samples. For carbon released at approximately 1200 degrees C, glasses analyzed as 1-2 mm chips contained 23-146 ppm C with delta 13C values of -4.8 to -9.3%, whereas samples crushed to 38-63 microns or 63-90 microns yielded 56-103 ppm C with delta 13C values of -6.1 to -9.2%. The concentrations and isotopic compositions of the primary carbon dissolved in the glasses and present in the vesicles are similar to those previously reported for other ocean-ridge basalts. The Juan de Fuca basaltic magmas were not in equilibrium with respect to carbon when they erupted and quenched on the sea floor. Evidence of disequilibrium includes (1) a large range of carbon contents among glasses collected at similar depths, (2) a highly variable calculated carbon isotopic fractionation between melt and vapor determined by comparing crushed and uncrushed splits of the same sample, and (3) a lack of correlation between vesicle abundance, carbon concentration, and depth of eruption. Variations in carbon concentration and delta 13C ratios along the ridge do not correlate with major element chemistry. The observed relationship between carbon concentrations and delta 13C values may be explained by late-stage, variable degrees of open-system (Rayleigh-like) degassing.     

Molecular and bulk isotopic analyses of organic matter in marls of the Mulhouse Basin (Tertiary, Alsace, France)

Contents of 13C in kerogens and carbonates in 21 samples from a core of the MAX borehole, Mulhouse Evaporite Basin, range from -27.3 to -23.5 and -3.7 to -1.8% vs PDB, respectively. Organic nitrogen in the same samples is enriched in 15N relative to atmospheric N2 by 12.2-15.7%. Hydrogen indices and delta values for kerogens vary systematically with facies, averaging 493 mg HC/g Corg and -25.7% in the most saline facies (dominated by inputs from aquatic sources) and 267 mg HC/g Corg and -23.7% in the least saline facies (50/50 aquatic/terrigenous). Values of delta were measured for individual aliphatic hydrocarbons from three samples representing three different organic facies. For all samples, terrigenous inputs were unusually rich in 13C, the estimated delta value for bulk terrigenous debris, apparently derived partly from CAM plants, being -22.5%. In the most saline facies, isotopic evidence indicates the mixing of 13C-depleted products of photosynthetic bacteria with 13C-enriched products of halotolerant eukaryotic algae. At lower salinities, a change in the producer community is marked by a decrease in the 13C content of algal lipids. The content of 13C in algal lipids increases in the least saline facies, due either to succession of different organisms or to decreased concentrations of dissolved CO2.     

The elastic properties of single-crystal fayalite as determined by dynamical measurement techniques

We present new elasticity measurements on single-crystal fayalite and combine our results with other data from resonance, pulse superposition interferometry, and Brillouin scattering to provide a set of recommended values for the adiabatic elastic moduliC _ij and their temperature variations. We use a resonance method (RPR) with specimens that were previously investigated by pulse superposition experiments. The nineC _ij of fayalite are determined from three new sets of measurements. One set of our newC _ij data is over the range 300–500 K. We believe that the relatively large discrep ncies found in someC _ij are due in large part to specimen inhomogeneities (chemical and microstructural) coupled with differences in the way various techniques sample, rather than only systematic errors associated with experimental procedures or in the preparations of the specimens.Our recommendeaC _ij's (GPa) and (C _ij/T) _p (GPa/K) are: The resulting values for the isotropic bulk and shear moduli,K _s and , and their temperature derivatives are:K _s=134(4) GPa; =50.7(0.3) GPa; (K _s/T) _p =–0.024(0.005) GPa/K; and (/T) _p =–0.013(0.001) GPa/K. An important conclusion is thatK _s increases as the Fe/(Fe+Mg) ratio in olivine is increased.     

Effects of onshore and offshore topography on sea breeze circulation: An observational study at eastern Attica,Greece

Field measurements of wind, air temperature and humidity were taken at the eastern part of the Attika district in June 1991, to examine the topographic influences exerted on the local sea breezes. These influences are due either to the elongated Evia island, faced by the northern half of Attica coastline some tens of kilometers offshore, or to the coast-parallel range of Hymettos mountain, rising steeply 12 km onshore. The instrumentation consisted mainly of three tethered meteorological balloons released at characteristic sires (i.e., the coast, a location between shoreline and mountain foot and the mountain top) and three autographic ground-based anemometers operating at selected locations. Data from the ground-based and upper air stations of the Hellenic National Meteorological Service, as well as the diurnal weather maps were also obtained and analyzed. Observations were made under different synoptic wind and the latter was found to determine remarkably the significance of the topographic effects. A preliminary two-dimensional numerical approach was also made concerning the sea breeze capability to reach the Hymettos mountain top in the case of a weak opposing geostrophic flow.     

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.