An overview and general results of the Lopez island OBS experiment

The purpose of the experiment was to determine the effects of coupling and bottom currents on ocean bottom seismometers. Twelve operational OBSs, three specially designed three-component systems, and a hydrophone were compared with each other. Unlike seismometers placed on hard rock at land stations, ocean bottom seismometers can be affected by soft sediments (which act as lossy mechanical springs) and by buoyancy. Coupling through soft sediments can modify the response to ground motion much as a low pass filter does, and high buoyancy tends to counteract this effect. These effects are observed in the Lopez data, which consist of signals from mechanical transient tests, cap shots, airgun pulses, and general background noise. The modification of response is pronounced for some instruments and barely noticeable in others. Instruments that stand high in the water relative to their base width tend to be susceptible to rocking motion that shows up as a mechanical cross coupling between horizontal and vertical motion. Correlation of Lopez results with coupling theory suggests that it is possible to design ocean bottom seismometers that will couple well to any sediment. Current levels at the Lopez site (<5 cm s^-1) were too small to produce noticeable effect on any of the instruments; however, the same design criteria that will minimize coupling problems will also lessen problems caused by ocean currents.Hawaii Institute of Geophysics Contribution No. 1171.     

Sand ridges on the inner Atlantic shelf of North America: Morphometric comparisons with Huthnance stability model

Sand ridge fields on the inner shelf of the Middle Atlantic Bight are generally thought to have formed in response to northeasterly storm flows as the shoreface underwent erosional retreat with postglacial sea-level rise. However, the hydrodynamic mechanism is poorly unerstood. Coastal boundary models see the ridges as responses of the seafloor to distortions in the flow induced by the coastal boundary. Stability models propose that an irregular initial topography will evolve toward an ordered array of bedforms in response to repeated flow events. The two classes of models are not mutually exclusive, nor are members within each class mutually exclusive. Results of measurements of ridge spacing on the inner Atlantic shelf of North America agree with the predictions of stability models.     

Radium and lead-210 in marine barite

Measurements of ²²⁶Ra and ²¹⁰Pb in barite samples separated from different depths of a piston core from the eastern equatorial Pacific are reported. ²²⁶Ra is enriched in the barite as would be expected from the chemistries of Ra and Ba; the ${}^{226}\text{Ra}\text{Ba}$ ratio centers around 1.5 · 10¹⁴ atoms/mole. The results suggest that barite is concentrating Ra at a rate comparable to its decay rate, viz. 5.78 · 10^?3 yr^?1. The gross ²¹⁰Pb depletion with respect to ²²⁶Ra is indicative of ²²²Rn loss due to the smallness of the barite crystals.     

Extreme value estimates for arbitrary bandwidth Gaussian processes using the analytic envelope

A procedure is presented for the estimation of extreme values of stationary Gaussian random processes with arbitrary bandwidths. This approach is based on the analytic envelope defined by the Hilbert Transform; this envelope is Rayleigh distributed regardless of bandwidth. For experimentally derived data that has been converted into digital form, the Hilbert Transform is approximated using algorithms implemented on a digital computer to produce samples of the envelope's time history. Next, the degree of correlation between these envelope samples is taken into account using a method developed from simulation studies of a series of synthetic Gaussian time histories with varying bandwidths. Once this correlation effect has been estimated, the standard methods of order statistics are applied to these samples using the Rayleigh probability density function. Examples of applying this procedure to experimentally derived data are presented.     

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

Pb and other ore metals in modern seafloor tectonic environments: Evidence from melt inclusions

Many modern seafloor tectonic environments are host to hydrothermal systems and associated polymetallic sulfide deposits. Metal transport and precipitation are controlled by magmatic processes such as pre-eruptive degassing and the hydrothermal cycle. The original availability of Pb and other ore metals in a given setting is dependent on concentrations in the original magmatic source or additional enrichment processes. We have examined the Pb budget of melt inclusions from nine modern seafloor settings representing back-arcs, mid-ocean ridges and seamounts. Melt inclusions provide information on the characteristics of parental magmas, including insights into metal budgets. Trace element data in melt inclusions hosted in plagioclase, olivine and pyroxene were obtained by laser-ablation inductively-coupled mass-spectrometry.Results from back-arcs emphasize the impact of slab-subduction and dehydration processes on the chemical characteristics of generated magmas. Volatile- and fluid-mobile element-rich melt inclusions at Manus basin and Okinawa trough reflect a robust contribution of elements from the subducting slab as evidenced by relatively low Ce/Pb ratios. At Bransfield strait, on the other hand, melt inclusions are volatile poor, and fluid-mobile element ratios are similar to mid-ocean ridge values indicating little or no contribution from the slab. High Cu concentrations at Manus basin and Okinawa trough can be explained by fluxing of ferric iron from the subducting slab benefiting the production of sulfate over sulfide.Metal budgets for seamounts located on and nearby the axis of mid-ocean ridge segments appear to be independent of any input of mantle plume material. Results from the southern Explorer ridge (strong lower mantle influence, transitional- and enriched-MORBs), Pito and Axial seamounts (moderate lower mantle influence, transitional-MORBs) and a Foundation near-ridge seamount (little to no mantle influence, normal-MORB) show that, despite similar tectonic environments and varying contributions of mantle plume material, Cu, Zn and Pb values do not vary significantly between the enriched and non-enriched magma components of a given setting.     

Towed cable behaviour during ship turning manoeuvers

The results of dynamic and steady-state cable simulations are used to show that a towed system can behave in either of two different ways on entering a turn. In a large radius turn the system maintains its straight-tow equilibrium configuration but in a slightly perturbed form. In a turn of small radius the system effectively collapses resulting in a large increase of fish depth and cable tension. A formula is included by which the approximate minimum radius of turn that does not precipitate collapse can be quickly calculated.Non-dimensional tables are presented giving details of the equilibrium configuration adopted by the cable when the ship maintains a circular course.Graphs are presented from which the time constants for the decay of lateral and longitudinal disturbances of 2-D cable profiles can be easily calculated. These can be used to estimate the time taken for a towed system to return to equilibrium following a manoeuvre.The derivation of the equations for the steady-state configurations and the time constants are included in appendices.     

Multi-level assessment of chronic toxicity of estuarine sediments with the amphipod Gammarus locusta: II. Organism and population-level endpoints

This study aimed to test the performance of the amphipod Gammarus locusta (L.) in chronic sediment toxicity tests. It constitutes part of a multi-level assessment of chronic toxicity of estuarine sediments, integrating organism and population-level endpoints with biochemical markers responses. Here we account for organism and population-level effects, while biomarker responses were reported in a companion article. Five moderately contaminated sediments from Sado and Tagus estuaries were tested, comprising 3 muddy and 2 sandy sediments. These sediments either did not show acute toxicity or were diluted with control sediment as much as required to remove acute toxicity. Subsequent chronic tests consisted of 28-day exposures with survival, individual growth and reproductive traits as endpoints. Two of the muddy sediments induced higher growth rates in the amphipods, and improved reproductive traits. This was understood to be a consequence of the amount of organic matter in the sediment, which was nutritionally beneficial to the amphipods, while concurrently decreasing contaminant bioavailability. Biomarker responses did not reveal toxicant-induced stress in amphipods exposed to these sediments. One of the sandy sediments was acutely toxic at 50% dilution, but in contrast stimulated amphipod growth when diluted 75%. This was presumed to be an indication of a hormetic response. Finally the two remaining contaminated sediments showed pronounced chronic toxicity, affecting survival and reproduction. The sex ratio of survivors was highly biased towards females, and offspring production was severely impaired. The particulars of the responses of this amphipod were examined, as well as strengths versus limitations of the sediment test. This study illustrates the utility of this chronic test for toxicity assessment of contaminated estuarine sediments, with potential application all along Atlantic Europe.