The experimental calibration of the iron isotope fractionation factor between pyrrhotite and peralkaline rhyolitic melt

A first experimental study was conducted to determine the equilibrium iron isotope fractionation between pyrrhotite and silicate melt at magmatic conditions. Experiments were performed in an internally heated gas pressure vessel at 500 MPa and temperatures between 840 and 1000 °C for 120-168 h. Three different types of experiments were conducted and after phase separation the iron isotope composition of the run products was measured by MC-ICP-MS. (i) Kinetic experiments using ⁵⁷Fe-enriched glass and natural pyrrhotite revealed that a close approach to equilibrium is attained already after 48 h. (ii) Isotope exchange experiments—using mixtures of hydrous peralkaline rhyolitic glass powder (∼4 wt% H₂O) and natural pyrrhotites (Fe_1 − xS) as starting materials— and (iii) crystallisation experiments, in which pyrrhotite was formed by reaction between elemental sulphur and rhyolitic melt, consistently showed that pyrrhotite preferentially incorporates light iron. No temperature dependence of the fractionation factor was found between 840 and 1000 °C, within experimental and analytical precision. An average fractionation factor of Δ ⁵⁶Fe/⁵⁴Fe_{pyrrhotite-melt} = −0. 35 ± 0.04‰ (2SE, n = 13) was determined for this temperature range. Predictions of Fe isotope fractionation between FeS and ferric iron-dominated silicate minerals are consistent with our experimental results, indicating that the marked contrast in both ligand and redox state of iron control the isotope fractionation between pyrrhotite and silicate melt. Consequently, the fractionation factor determined in this study is representative for the specific Fe²⁺/ΣFe ratio of our peralkaline rhyolitic melt of 0.38 ± 0.02. At higher Fe²⁺/ΣFe ratios a smaller fractionation factor is expected. Further investigation on Fe isotope fractionation between other mineral phases and silicate melts is needed, but the presented experimental results already suggest that even at high temperatures resolvable variations in the Fe isotope composition can be generated by equilibrium isotope fractionation in natural magmatic systems.     

The influence of pressure and composition on the viscosity of andesitic melts

The effect of pressure and composition on the viscosity of both anhydrous and hydrous andesitic melts was studied in the viscosity range of 10⁸ to 10^11.5 Pa · s using parallel plate viscometry. The pressure dependence of the viscosity of three synthetic, iron-free liquids (andesite analogs) containing 0.0, 1.06, and 1.96 wt.% H₂O, respectively, was measured from 100 to 300 MPa using a high-P-T viscometer. These results, combined with those from Richet et al. (1996), indicate that viscosities of anhydrous andesitic melts are independent of pressure, whereas viscosities of hydrous melts slightly increase with increasing pressure. This trend is consistent with an increased degree of depolymerization in the hydrous melts. Compositional effects on the viscosity were studied by comparing iron-free and iron-bearing compositions with similar degrees of depolymerization. During experiments at atmospheric and at elevated pressures (100 to 300 MPa), the viscosity of iron-bearing anhydrous melts preequilibrated in air continuously increased, and the samples became paramagnetic. Analysis of these samples by transmission electron microscopy showed a homogeneous distribution of crystals (probably magnetite) with sizes in the range of 10 to 50 nm. No significant difference in the volume fractions of crystals was found in samples after annealing for 170 to 830 min at temperatures ranging from 970 to 1122 K. An iron-bearing andesite containing 1.88 wt.% H₂O, which was synthesized at intrinsic fO₂ conditions in an internally heated pressure vessel, showed a similar viscosity behavior as the anhydrous melts. The continuous increase in viscosity at a constant temperature is attributed to changes of the melt structure due to exsolution of iron-rich phases. By extrapolating the time evolution of viscosity down to the time at which the run temperature was reached, for both the anhydrous (at 1055 K) and the hydrous (at 860 K) iron-bearing andesite, the viscosity is 0.7 log units lower than predicted by the model of Richet et al. (1996). This may be explained by differences in structural properties of Fe²⁺ and Fe³⁺ and their substitutes Mg²⁺, Ca²⁺, and Al³⁺, which were used in the analogue composition.The effect of iron redox state on the viscosity of anhydrous, synthetic andesite melts was studied at ambient pressure using a dilatometer. Reduced iron-bearing samples were produced by annealing melts in graphite crucibles in an Ar/CO atmosphere for different run times. In contrast to the oxidized sample, no variation of viscosity with time and no exsolution of iron oxide phases was observed for the most reduced glasses. This indicates that trivalent iron promotes the exsolution of iron oxide in supercooled melts. With decreasing Fe³⁺/ΣFe ratio from 0.58 to 0.34, the viscosity decreases by ∼1.6 log units in the investigated temperature range between 964 and 1098 K. A more reduced glass with Fe³⁺/ΣFe = 0.21 showed no additional decrease in viscosity. Our conclusion from these results is that the viscosity of natural melts may be largely overestimated when using data obtained from samples synthesized in air.     

Tides and Earth Rotation

A short general explanation of tidal forces and tidal effects is given. The influences of Earth tides and ocean tides on the Earth's rotation vector are presented. Today, the theoretical models for periodic variations in the Earth's rotation and in polar motion can be compared with precise measurements done by modern space techniques. Secular changes of the Earth's rotation due to interactions within the Earth-Moon-system are also discussed.     

Nordic Geoscience and the 33rd International Geological Congress： Introduction

Geology has been of profound importance for the Nordic countries since the Middle Ages. Strong economies were built on an understanding of the occurrence in bedrock of minerals containing metals, e.g., silver, copper, zinc and iron, and eventually led to the establishment of the first Geological Surveys in Norway and Sweden in the middle of the nineteenth century. The geology of Norden ranges from the oldest to youngest rocks on the planet. Based on the papers in this special issue, this introduction provides a brief summary of the geological evolution of Norden, from the Archean of Greenland and northern Fennoscandia to the on-going volcanicity in Iceland on the MidAtlantic Ridge. It also refers to aspects of Geoscience that are particularly important for society in Norden, including geo-resources （petroleum, geothermal energy, nuclear energy, metals, industrial minerals and groundwater） and environmental geology （including natural and anthropogenic processes, medical geology, geo-hazards and climate）. Information on the early history of geology in Norden and the geological surveys is also included and, finally, an outline of the 33rd International Geological Congress with its main theme “Earth System Science： Foundation for Sustainable Development”.     

Estimation of irrigation flow by hydrograph analysis in a complex agricultural catchment in subtropical China

Estimating the amount of irrigation water is challenging at the catchment scale because of the difficulties in direct measurement and interactions between the flow components. The objectives of the study were to characterize the catchment flows in an agricultural catchment with an irrigation system in subtropical China and to estimate catchment irrigation flow using hydrograph analysis methods. A weighting model and multiple regression models were established to estimate catchment irrigation outflow according to the hydrographs of the inflows and outflows of the catchment. The multiple regression models took into consideration the drainage time of base flow, resulting in better estimation on an event and annual basis. Using the MR‐6d method, the estimated irrigation outflows amounted to 3700 mm, 2600 mm and 2760 mm during 2001, 2002 and 2003 respectively, which covered 70%, 60% and 64% respectively of the total catchment outflows in the corresponding years. Copyright © 2007 John Wiley & Sons, Ltd.     

Recent climatic trends and linkages to river discharge in Central Vietnam

In this study, change in rainfall, temperature and river discharge are analysed over the last three decades in Central Vietnam. Trends and rainfall indices are evaluated using non‐parametric tests at different temporal levels. To overcome the sparse locally available network, the high resolution APHRODITE gridded dataset is used in addition to the existing rain gauges. Finally, existing linkages between discharge changes and trends in rainfall and temperature are explored. Results are indicative of an intensification of rainfall (+15%/decade), with more extreme and longer events. A significant increase in winter rainfall and a decrease in consecutive dry days provides strong evidence for a lengthening wet season in Central Vietnam. In addition, trends based on APHRODITE suggest a strong orographic signal in winter and annual trends. These results underline the local variability in the impacts of climatic change at the global scale. Consequently, it is important that change detection investigations are conducted at the local scale. A very weak signal is detected in the trend of minimum temperature (+0.2°C/decade). River discharge trends show an increase in mean discharge (31 to 35%/decade) over the last decades. Between 54 and 74% of this increase is explained by the increase in precipitation. The maximum discharge also responds significantly to precipitation changes leading to a lengthened wet season and an increase in extreme rainfall events. Such trends can be linked with a likely increase in floods in Central Vietnam, which is important for future adaptation planning and management and flood preparedness in the region. Copyright © 2012 John Wiley & Sons, Ltd.