数字化水准仪应用于跨断层水准测量的性能分析

跨断层水准观测是一种高精度的测量工作,对水准仪的精度、稳定性等方面提出了较高的要求,因此仪器老化所产生的仪器性能衰减成为行业内普遍关注的问题。本文分析了Trimble DiNi12型数字水准仪在整个生命周期中的第1年、第4年和第7年的产出数据,结果表明这种数字水准仪在使用的前期性能衰减快,中后期可保持相对稳定的状态。Trimble DiNi12型数字水准仪与Leica DNA03型数字水准仪分别投入使用的第1年内测段往返测闭合差表明,Trimble DiNi12型水准仪所能达到的实际精度优于Leica DNA03型水准仪。进一步分析可知,Trimble DiNi12型水准仪在稳定性上也有一定优势,这和实际的使用情况相符。     

晋冀蒙交界地区最小一维速度模型联合反演

文章使用内蒙古地震台网记录到的晋冀蒙交界地区517个定位地震,在参考原始编目报告的基础上,用和达法拟合走时曲线删除错误数据,使用Kissling方法联合反演得到晋冀蒙交界地区最小一维P波速度模型和震源位置。结果显示,研究区P波速度随着深度增加而递增,无明显间断面,联合反演得到的震中位置较原始报告分布更集中,簇状分布更明显。     

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.     

车辆行驶振动对古长城影响分析及评价

交通振动会对周边古建筑产生不利影响,研究振动规律对古建筑的稳定性评价非常重要。为此,利用振动探测仪采集古长城因周边道路车辆行驶引起的振动数据。通过解译振动波形了解场地的振动强度衰减过程及大小,确定振动强度及对长城的影响,以及各因素与振动强度的关系。以国家古建筑允许振动规范对波形解译结果进行评价,为解决此类文明遗址的保护问题提供了技术支撑。分析结果表明:不同路况,振动衰减规律不同,路况较好振动强度衰减迅速;行驶车辆的车速、荷载及行驶道路质量均可影响长城水平振动强度,车速越快、荷载越大、道路质量越差,长城水平振动强度越大;长城不同位置对车辆行驶产生的振动响应不同,长城脚水平振动强度大于长城顶水平振动强度。     

云南中甸-大具断裂上新发现的地震地表破裂带

中甸-大具断裂是川滇菱形块体的西南边界,总体走向310°—320°。近年来我们对该断裂进行了1:50000条带状地质填图,发现了断裂活动的地质地貌证据。其中,在丽江大具盆地内（金沙江右岸）沿断裂新发现一处典型地震地表破裂带,长约600m,宽120m左右,主要表现为地表挤压鼓包、挤压垄脊、张裂缝、挤压阶区等,呈NW走向,与中甸-大具断裂走向基本一致。野外工作中,我们详细记录和测量了地表破裂的破裂样式、破裂规模和相关定量数据,利用旋翼无人机测绘了地表破裂带的形态和展布,获得了高精度DEM,分析了地表破裂表现出的运动性质。在已有资料的基础上讨论了地表破裂的形成时代、归属、震级大小,简要分析了其发震断层。新地震地表破裂带的发现为进一步研究中甸-大具断裂活动特征、古地震及地震危险性提供了基础资料。     

COSEISMIC DISPLACEMENT FIELD OF THE WENCHUAN EARTHQUAKE DERIVED FROM STRONG MOTION RECORDS AND APPLICATION IN SLIP INVERSION

The development of high-rate GNSS seismology and seismic observation methods has provided technical support for acquiring the near-field real-time displacement time series during earthquake. But in practice, the limited number of GNSS continuous stations hardly meets the requirement of near-field quasi-real-time coseismic displacement observation, while the macroseismographs could be an important complement. Compared with high-rate GNSS, macroseismograph has better sensitivity, higher resolution(100~200Hz)and larger dynamic range, and the most importantly, lower cost. However, baseline drift exists in strong-motion data, which limits its widespread use. This paper aims to prove the feasibility and reliability of strong motion data in acquiring seismic displacement sequences, as a supplement to high-rate GNSS. In this study, we have analyzed the strong-motion data of Wenchuan M_S8.0 earthquake in Longmenshan fault zone, based on the automatic scheme for empirical baseline correction proposed by Wang et al., which fits the uncorrected displacement by polynomial to obtain the fitting parameters, and then the baseline correction is completed in the velocity sequence. Through correction processing and quadratic integration, the static coseismic displacement field and displacement time series are obtained. Comparison of the displacement time series from the strong motions with the result of high-rate GPS shows a good coincidence. We have worked out the coseismic displacement field in the large area of Wenchuan earthquake using GPS data and strong motion data. The coseismic displacement fields calculated from GPS and strong motions are consistent with each other in terms of magnitude, direction and distribution patterns. High-precision coseismic deformation can provide better data constraint for fault slip inversion. To verify the influence of strong-motion data on slip distribution in Wenchuan earthquake, we used strong motion, GPS and InSAR data to estimate the stress drop, moment magnitude and coseismic slip model, and our results agreed with those of the previous studies. In addition, the inversion results of different data are different and complementary to some extent. The use of strong-motion data supplements the slip of the fault in the 180km segment and the 270~300km segment, thus making the inversion results of fault slip more comprehensive. From this result, we can draw the following conclusions:1)Based on the robust baseline correction method, the use of strong motion data, as an important complement to high-rate GNSS, can obtain reliable surface displacement after the earthquake. 2)The strong motion data provide an effective method to study the coseismic displacement sequence, the surface rupture process and quick seismogenic parameters acquisition. 3)The combination of multiple data can significantly improve the data coverage and give play to the advantages of different data. Therefore, it is suggested to combine multiple data(GPS, strong motion, InSAR, etc.)for joint inversion to improve the stability of fault slip model.     

CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT

Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique. We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(M_L ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015. Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(M_L ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault. Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ₁ of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ₁ of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ₁ of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir.     

基于Sato模型的内蒙古东北部地区尾波Q值

基于Sato模型,采用2016年3月至2018年6月内蒙古东北部及临近地区发生的526次地震事件,挑选M_L≥2.0、记录清晰且信噪比较高的102次地震事件,拟合得到内蒙古东北部地区尾波Q值,得到Q_C(f)=(64.74±29.09)f^{(0.8925±0.0765});Q值与依赖指数η成反比,且该区北部Q值偏高,南部Q值偏低,可能与地质构造及地震活动性有关。     

地震计保温效能分析

为内蒙古自治区大沁塔拉地震台地震计安装保温罩,利用台基噪声计算软件,计算保温前后地震观测数据PSD概率密度函数,分析保温罩对地震计的效能,结果发现,保温罩安装后,地震计温度变化平稳,地震观测数据质量提高。     

Dynamic amplification factors for a system with multiple-degrees-of-freedom

It is well-known that the responses of a structure are different when subjected to a static load or a sudden step load. The dynamic amplification factor (DAF), which is defined as the ratio of the amplitude of the vibratory response to the static response, is normally used to depict the dynamic effect. For a single-degree-of-freedom system (SDOF) subjected to a sudden dynamic load, the maximum value of DAF is 2. Many design guidelines therefore use 2 as an upper bound to consider the dynamic effect. For a civil engineering structure, which is normally a multiple-degrees-of-freedom (MDOF) system, the DAF may exceed 2 in certain circumstances. The adoption of 2 as the upper bond as suggested by the design guidelines therefore may lead to unsafe structural design. Very limited studies systematically investigate the DAF of a MDOF system. This study theoretically investigates the DAF of a MDOF system when it is subjected to a step load based on the fundamental theory of structural dynamics. The condition on which the DAF may exceed 2 is defined. Two numerical examples and one experimental study of a cable-stayed bridge subjected to sudden cable loss are presented to illustrate the problem.