An enhanced approach for surface flow routing over drainage‐constrained triangulated irregular networks

The accuracy and efficiency of the simulations in distributed hydrological models must depend on the proper estimation of flow directions and paths. Numerous studies have been carried out to delineate the drainage patterns based on gridded digital elevation models (DEMs). The triangulated irregular network (TIN) has been increasingly applied in hydrological applications due to the advantages of high storage efficiency and multi‐scale adaptive performance. Much of the previous literature focuses mainly on filling the depressions on gridded DEMs rather than treating the special cases in TIN structures, which has hampered its applications to hydrological models. This study proposes a triangulation‐based solution for the removal of flat areas and pits to enhance the simulation of flow routing on triangulated facet networks. Based on the drainage‐constrained TIN generated from only a gridded DEM by the compound point extraction (CPE) method, the inconsistent situations including flat triangles, V‐shape flat edges and sink nodes are respectively identified and rectified. The optimization algorithm is an iterative process of TIN reconstruction, in which the flat areas are generalized into their center points and the pits are rectified by embedding break lines. To verify the proposed algorithm and investigate the potential for flow routing, flow paths of steepest descent are derived by the vector‐based tracking algorithm based on the optimized TIN. A case study of TIN optimization and flow path tracking was performed on a real‐world DEM. The outcomes indicate that the proposed approach can effectively solve the problem of inconsistencies without a significant loss in accuracy of the terrain model.     

Study on Sampling Rule and Simplification of LiDAR Point Cloud Based on Terrain Complexity

It is difficult to obtain digital elevation model (DEM) in the mountainous regions. As an emerging technology, Light Detection and Ranging (LiDAR) is an enabling technology. However, the amount of points obtained by LiDAR is huge. When processing LiDAR point cloud, huge data will lead to a rapid decline in data processing speed, so it is necessary to thin LiDAR point cloud. In this paper, a new terrain sampling rule had been built based on the integrated terrain complexity, and then based on the rule a LiDAR point cloud simplification method, which was referred as to TCthin, had been proposed. The TCthin method was evaluated by experiments in which XUthin and Lasthin were selected as the TCthin’s comparative methods. The TCthin’s simplification degree was estimated by the simplification rate value, and the TCthin’s simplification quality was evaluated by Root Mean Square Deviation. The experimental results show that the TCthin method can thin LiDAR point cloud effectively and improve the simplification quality, and at 5 m, 10 m, 30 m scale levels, the TCthin method has a good applicability in the areas with different terrain complexity. This study has theoretical and practical value in sampling theory, thinning LiDAR point cloud, building high-precision DEM and so on.     

Sea-Level Change Over the China Sea and Its Vicinity Derived from 25-Year T/P Series Altimeter Data

The characteristics of sea-level change in the China Sea and its vicinity are studied by combining TOPEX/Poseidon (T/P), Jason-1, Jason-2, and Jason-3 altimeter data. First, the sea-surface height is computed by using monthly data via collinear adjustment, regional selection, and crossover adjustment. The sea-level anomaly (SLA) from October 1992 to July 2017 is calculated based on the difference that is obtained by the value derived from the inverse distance weighting method to interpolate the CNES_CLS15 model value at a normal point. By analyzing the satellite data at the same time in orbit, three mean bias groups over the China Sea and its vicinity are obtained: the difference between T/P and Jason-1 is ??11.76 cm, the difference between Jason-1 and Jason-2 is 9.6 cm, and the difference between Jason-2 and Jason-3 is 2.42 cm. To establish an SLA series for 25 years in the study area, the SLAs are corrected. Mean rate of sea-level rise of the Bohai Sea, Yellow Sea, East China Sea, and South China Sea of 4.87 mm/a, 2.68 mm/a, 2.88 mm/a, and 4.67 mm/a, respectively, is found by analyzing the series of SLAs.     

Surface Reflectance Climate Data Records (CDRs) is a Reliable Landsat ETM+ Source to Study Chlorophyll Content in Pecan Orchards

We evaluated the relationships among three Landsat Enhanced Thematic Mapper (ETM+) datasets, top-of-atmosphere (TOA) reflectance, surface reflectance climate data records (surface reflectance-_CDR) and atmospherically corrected images using Fast Line-of-Sight atmospheric analysis of Spectral Hypercubes model (surface reflectance-_FLAASH) and their linkto pecan foliar chlorophyll content(chl-cont). Foliar chlorophyll content as determined with a SPAD meter, and remotely-sensed data were collected from two mature pecan orchards (one grown in a sandy loam and the other in clay loam soil) during the experimental period. Enhanced vegetation index derived from remotely sensed data was correlated to chl-cont. At both orchards, TOA reflectance was significantly lower than surface reflectance within the 550–2400 nm wavelength range. Reflectance from atmospherically corrected images (surface reflectance-_CDR and surface reflectance-_FLAASH) was similar in the shortwave infrared (SWIR: 1550–1750 and 2080–2350 nm) and statistically different in the visible (350–700 nm). Enhanced vegetation index derived from surface reflectance-_CDR and surface reflectance-_FLAASH had higher correlation with chl-cont than TOA. Accordingly, surface reflectance is an essential prerequisite for using Landsat ETM+  data and TOA reflectance could lead to miss-/or underestimate chl-cont in pecan orchards. Interestingly, the correlation comparisons (Williams t test) between surface reflectance-_CDR and chl-cont was statistically similar to the correlation between chl-cont and commercial atmospheric correction model. Overall, surface reflectance-_CDR, which is freely available from the earth explorer portal, is a reliable atmospherically corrected Landsat ETM+ image source to study foliar chlorophyll content in pecan orchards.     

Comparative Analyses of the Point Cloud Produced by Using Close-Range Photogrammetry and Terrestrial Laser Scanning for Rock Surface

Point cloud produced by using theoretically and practically different techniques is one of the most preferred data types in various engineering applications and projects. The advanced methods to obtain point cloud data in terrestrial studies are close range photogrammetry (CRP) and terrestrial laser scanning (TLS). In the TLS technique, separated from the CRP in terms of system structure, denser point cloud at certain intervals can be produced. However, point clouds can be produced with the help of photographs taken at appropriate conditions depending on the hardware and software technologies. Adequate quality photographs can be obtained by consumer grade digital cameras, and photogrammetric software widely used nowadays provides the generation of point cloud support. The tendency and the desire for the TLS are higher since it constitutes a new area of research. Moreover, it is believed that TLS takes the place of CRP, reviewed as antiquated. In this study that is conducted on rock surfaces located at Istanbul Technical University Ayazaga Campus, whether point cloud produced by means photographs can be used instead of point cloud obtained by laser scanner device is investigated. Study is worked on covers approximately area of 30 m?×?10 m. In order to compare the methods, 2D and 3D analyses as well as accuracy assessment were conducted. 2D analysis is areal-based whereas 3D analysis is volume-based. Analyses results showed that point clouds in both cases are similar to each other and can be used for similar other studies. Also, because the factors affecting the accuracy of the basic data and derived product for both methods are quite variable, it was concluded that it is not appropriate to make a choice regardless of the object of interest and the working conditions.     

Science-based approach for credible accounting of mitigation in managed forests

Background

The credibility and effectiveness of country climate targets under the Paris Agreement requires that, in all greenhouse gas (GHG) sectors, the accounted mitigation outcomes reflect genuine deviations from the type and magnitude of activities generating emissions in the base year or baseline. This is challenging for the forestry sector, as the future net emissions can change irrespective of actual management activities, because of age-related stand dynamics resulting from past management and natural disturbances. The solution implemented under the Kyoto Protocol (2013–2020) was accounting mitigation as deviation from a projected (forward-looking) “forest reference level”, which considered the age-related dynamics but also allowed including the assumed future implementation of approved policies. This caused controversies, as unverifiable counterfactual scenarios with inflated future harvest could lead to credits where no change in management has actually occurred, or conversely, failing to reflect in the accounts a policy-driven increase in net emissions. Instead, here we describe an approach to set reference levels based on the projected continuation of documented historical forest management practice, i.e. reflecting age-related dynamics but not the future impact of policies. We illustrate a possible method to implement this approach at the level of the European Union (EU) using the Carbon Budget Model.

Results

Using EU country data, we show that forest sinks between 2013 and 2016 were greater than that assumed in the 2013–2020 EU reference level under the Kyoto Protocol, which would lead to credits of 110–120 Mt CO₂/year (capped at 70–80 Mt CO₂/year, equivalent to 1.3% of 1990 EU total emissions). By modelling the continuation of management practice documented historically (2000–2009), we show that these credits are mostly due to the inclusion in the reference levels of policy-assumed harvest increases that never materialized. With our proposed approach, harvest is expected to increase (12% in 2030 at EU-level, relative to 2000–2009), but more slowly than in current forest reference levels, and only because of age-related dynamics, i.e. increased growing stocks in maturing forests.

Conclusions

Our science-based approach, compatible with the EU post-2020 climate legislation, helps to ensure that only genuine deviations from the continuation of historically documented forest management practices are accounted toward climate targets, therefore enhancing the consistency and comparability across GHG sectors. It provides flexibility for countries to increase harvest in future reference levels when justified by age-related dynamics. It offers a policy-neutral solution to the polarized debate on forest accounting (especially on bioenergy) and supports the credibility of forest sector mitigation under the Paris Agreement.

     

Evaluation of gravitational curvatures of a tesseroid in spherical integral kernels

Proper understanding of how the Earth’s mass distributions and redistributions influence the Earth’s gravity field-related functionals is crucial for numerous applications in geodesy, geophysics and related geosciences. Calculations of the gravitational curvatures (GC) have been proposed in geodesy in recent years. In view of future satellite missions, the sixth-order developments of the gradients are becoming requisite. In this paper, a set of 3D integral GC formulas of a tesseroid mass body have been provided by spherical integral kernels in the spatial domain. Based on the Taylor series expansion approach, the numerical expressions of the 3D GC formulas are provided up to sixth order. Moreover, numerical experiments demonstrate the correctness of the 3D Taylor series approach for the GC formulas with order as high as sixth order. Analogous to other gravitational effects (e.g., gravitational potential, gravity vector, gravity gradient tensor), numerically it is found that there exist the very-near-area problem and polar singularity problem in the GC east–east–radial, north–north–radial and radial–radial–radial components in spatial domain, and compared to the other gravitational effects, the relative approximation errors of the GC components are larger due to not only the influence of the geocentric distance but also the influence of the latitude. This study shows that the magnitude of each term for the nonzero GC functionals by a grid resolution 15\(^{{\prime } }\,\times \) 15\(^{{\prime }}\) at GOCE satellite height can reach of about 10\(^{-16}\) m\(^{-1}\) s\(^{2}\) for zero order, 10\(^{-24 }\) or 10\(^{-23}\) m\(^{-1}\) s\(^{2}\) for second order, 10\(^{-29}\) m\(^{-1}\) s\(^{2}\) for fourth order and 10\(^{-35}\) or 10\(^{-34}\) m\(^{-1}\) s\(^{2}\) for sixth order, respectively.