Source and supply of sediment to a shoreline salient in a fringing reef environment

Reef-associated landforms are coupled to the health of the reef ecosystem which produces the sediment that forms and maintains these landforms. However, this connection can make reef-fronted coastlines sensitive to the impacts of climate change, given that any decline in ecosystem health (e.g. decreasing sediment supply) or changes to physical processes (e.g. sea level rise, increasing wave energy) could drive the sediment budgets of these systems into a net erosive state. Therefore, knowledge of both the sediment sources and transport mechanisms is required to predict the sensitivity of reef-associated landforms to future climate change. Here, we examine the benthic habitat composition, sediment characteristics (composition, texture, and age), and transport mechanisms and pathways to understand the interconnections between coastal morphology and the reef system at Tantabiddi, Ningaloo Reef, Western Australia. Benthic surveys and sediment composition analysis revealed that although live coral accounts for less than 5% of the benthic cover, coral is the dominant sediment constituent (34% on average). Sediment ages (²³⁸U/²³⁰Th) were mostly found to be thousands of years old, suggesting that the primary sediment source is relic reef material (e.g. Holocene reef framework). Sediment transport across the lagoon was quantified through measurements of ripple migration rates, which were found to be shoreward migrating and responsible for feeding the large shoreline salient in the lee of the reef. The derived sediment fluxes were comparable with previously measured rates of sediment production by bioerosion. These results suggest that sediment budgets of systems dependent on old (>10³ years) source materials may be more resilient to climate change as present-day reef health and community composition (i.e. sources of ‘new’ carbonate production) have limited influence on sediment supply. Therefore, the vulnerability of reef-associated landforms in these systems will be dictated by future changes to mechanisms of sediment generation (e.g. bioerosion) and/or physical processes. © 2018 John Wiley & Sons, Ltd.     

Orthophosphate and biotite chemistry from orthopyroxene-bearing migmatites from California and South India: The role of a fluid-phase in the evolution of granulite-facies migmatites

Migmatites from Cone Peak, California, USA and the Satnur-Sangam road, Southern Karnataka, India contain coarser grained orthopyroxene-bearing leucosomes with subordinate biotite in finer grained hornblende-biotite-pyroxene-bearing hosts. At both localities the leucosomes are enriched in quartz and feldspar and have a higher ratio of pyroxene to hornblende + biotite compared to the host rocks. Biotite grains in leucosomes along the Satnur-Sangam road are concentrated at the margins of orthopyroxene grains and have lower abundances of Ti, Fe, and Cl and a higher abundance of F than biotite grains from the host rock. Fluorapatite grains in all rocks from both localities contain monazite inclusions similar to those produced experimentally by metasomatically induced dissolution and reprecipitation. Some fluorapatite grains at both localities are partially rimmed by allanite. The only compositional differences found between fluorapatite grains in the leucosomes and host rocks were higher concentrations of Cl in grains in leucosomes from Cone Peak. The mineralogies of the rocks suggest that the leucosomes formed by dehydration melting reactions that consumed feldspar, quartz, hornblende, and biotite and produced orthopyroxene. Allanite rims at the margins of fluorapatite grains may have formed by the later retrogression of monazite rims formed by incongruent dissolution of fluorapatite in the melt. Biotite grains at the margins of orthopyroxene crystals in the leucosomes from the Satnur-Sangam road apparently formed by retrogression of orthopyroxene upon the solidification of the anatectic melt. A similar high-grade retrogression did not affect orthopyroxene crystals at Cone Peak, indicating that H₂O was removed from the crystallizing leucosomes probably in a low H₂O activity fluid. Compositional differences between the paleosome and neosomes at Cone Peak are best explained by metasomatic interaction with concentrated brines while elevated Cl concentrations in fluorapatites in the leucosome suggest interaction with a Cl-bearing fluid. Brines may have been responsible for an exchange of elements between the host rock along the Satnur-Sangam road and zones of melt generation now marked by leucosomes, but fluid flow appears to have been less vigorous than at Cone Peak.     

Chemical composition and acute toxicity in the water after in situ burning--a laboratory experiment

The chemical composition and toxicity of a water soluble fraction (WSF) of oil versus the underlying water after in situ burning (ISB), has been studied in a laboratory experiment. A system for allowing water sampling after ISB was developed. Seawater samples and oil were collected prior to and immediately after ISB, and chemical analysis was conducted. The chemical characterization of the water showed that the disappearance of water soluble oil components during ISB was insignificant. Acute toxicity tests with the marine copepod Calanus finmarchicus and Microtox® bioassay was performed to establish LC₅₀/EC₅₀ values of the water. The results were compared with regular WAF systems with unburned weathered oil, and indicated no increase in toxicity in the underlying water after ISB.     

Response of unconfined turbidity current to normal‐fault topography

Turbidity currents descending the slopes of deep‐water extensional basins or passive continental margins commonly encounter normal‐fault escarpments, but such large‐magnitude phenomena are hydraulically difficult to replicate at small scale in the laboratory. This study uses advanced computational fluid dynamics numerical simulations to monitor the response of large, natural‐scale unconfined turbidity currents (100 m thick and 2000 m wide at the inlet gate) to normal‐fault topography with a maximum relief of nearly 300 m. For comparative purposes, the turbidity current is first released on a non‐faulted pristine slope of 1·5° (simulation model 1). The expanding and waxing flow bypasses the slope without recognizable deposition within the visibility limit of 8 vol.% sand grain packing. Similar flow is then released towards the tip (model 2) and towards the centre (model 3) of a normal‐fault escarpment. In both of these latter models, the sand carried by flow tends to be entrapped in four distinct depozones: an upslope near‐gate zone of flow abrupt expansion and self‐regulation; a flow‐transverse zone at the fault footwall edge; a flow‐transverse zone at the immediate hangingwall; and a similar transverse zone near the crest of the hangingwall counter‐slope, where some of the deposited sand also tends to be reshuffled to the previous zone by a secondary reverse underflow. The near‐bottom reverse flow appears to be generated on a counter‐slope of 1·1°, increased to 2·0° by deposition. The Kelvin–Helmholtz interface instability plays an important role by causing three‐dimensional fluctuations in the flow velocity magnitude and sediment concentration. The thick deposits of large single‐surge flows may thus show hydraulic fluctuations resembling those widely ascribed to hyperpycnal flows. The study indicates further that the turbiditic slope fans formed on such fault topographies are likely to be patchy and hence may differ considerably from the existing slope‐fan conceptual models when it comes to the spatial prediction of main sand depozones.     

Kandidater udgået fra Københavns Universitets Geografiske Institut 1966–71

Christensen, Leif: Faststående og omlejrede Saale-morånelersaflejringer. Et eksempel fra Szdding-området, Vestjylland. Geografisk Tidsskrift 82: 91–94. Copenhagen, Dec. 1, 1982.

In situ clayey till materials on the Skovbjerg Bakkea, western Jutland can be recognized by crop-marks revealing pseudomorphs of ice-wedge polygons in orthogonal, random orthogonal and hexagonal patterns. The tills inside these polygonal patterns have high shear-strength values as measured by vane tests. Remoulded fossil solifluction deposits of till origin reveal stripes and deformed polygonal patterns in the crops. High strength as measured by vane are encountered below fossil solifluction deposits 4 meters below ground.     

Anmeldelser

Meyer, Marlene: Settlement Patterns and Land-use in Northern Ghana—A Study of the Changes during the period 1963–1991 based on Historical Surveys and recent SPOT-images. Geografisk Tidsskrift 92:101–104. Copenhagen 1992.

A study by Hunter (1966) describes how large areas along the Red Volta River bank, have been abandoned due to river blindness. The mapping of current land-use status and settlements patterns, using multispectral SPOT-satellite images, shows how the border of settlements continue to retreat, whereas new land is being reclaimed for bush fields in the abandoned areas.     

A Compilation of Radiocarbon Dates from Disko Bugt,Central West Greenland/Meteorological Observations in 1996 at the Arctic Station,Qeqertarsuaq (Godhavn), Central West Greenland/A Discussion on Pingos in Mellemfjord,Disko, Central West Greenland/Open System Pingos in Mellemfjord,Disko, Central West Greenland: A Reply to Gurney and Worsley

188 new and previously published radiocarbon dates on Holocene material from Disko Bugt, central West Greenland, are presented together with relevant informations (laboratory number, place name, dated material, geografic coordinates, altitude and δ¹³C-value) about the dates.

In October 1990 an automatic weather station was established at the Arctic station (65 °15′N,53 °31′W), Qeqertarsuaq (Godhavn), Central West Greenland. The Station register parameters each 20 min., and the parameters have been described in an earlier paper in this journal by Nielsen et al. (1995). The present paper summarises main points of the climate during 1996.

Open system, or more correctly, hydraulic pingos, are genetically poorly understood. A continuing problem concerns their need for a perennial groundwater supply (intra- or sub-permafrost). This has to be maintained despite the existence of continuous permafrost in many areas where they are located. Recent work on Disko Island has suggested a new type of hydraulic pingo developing only in a “marsh environment”. It is argued that the marsh setting is not relevant to the formation of these features and that they are simply hydraulic pingos.

Abstract

A group of marsh initiated open system pingo remnants from the Iterdlagssûp kûgssua valley mouth, in Mellemfjord, Disko Island, Central West Greenland was described in Christiansen (1995). Gurney and Worsley (1997) state that the location of this group of pingo remnants in the Iterdlagssûp kûgssua valley mouth is of no relevance to their genesis, and that they presumably were the result of an assumed late Holocene sea level regression, causing permafrost to be established in the valley bottom. In this reply the arguments by Gurney and Worsley (1997) on the Iterdlagssûp kûgssua valley pingos are commented, and it is argued by way of sea level information, frost penetration and water supply that the special setting must indeed have caused pingo initiation and growth. Furthermore, the area has experienced a relative sea level rise during the late Holocene.     

Meteorological Observations 2002 at the Arctic Station,Qeqertarsuaq (69°15'N), Central West Greenland

An automatic meteorological station has been operating at the Arctic Station (69°15'N, 53°31'W) in West Greenland since 1990. This paper summarises meteorological parameters during 2002, including snow cover, ground temperatures and active layer development, and air temperatures at the Station during the last 12 years are compared to large scale trends during the last century.

A compilation of 93 sedimentation rate determinations based on ²¹⁰Pb dating has been carried out for the North Sea-Baltic Sea transition area from a database containing 165 determinations carried out by Danish institutions. In the depositional parts of the area sedimentation rates generally range 25–6403 g m^?2 y^?1. An extreme rate of 13351 g m^?2 y^?1 is observed on a station in the Skagerrak. Sedimentation rates significantly increase with depth indicating that the Skagerrak and northern parts of the Kattegat as well as the deep basins in the Baltic Sea act as depocentres for fine-grained sediments. Apparently, sedimentation rates have increased in recent years.