Network-based triple-frequency carrier phase ambiguity resolution between reference stations using BDS data for long baselines

Network-based ambiguity resolution (AR) between reference stations is the prerequisite to realize a precise real-time kinematic positioning service. With the help of BDS triple-frequency signals, we can efficiently deal with the ionospheric delay and tropospheric delay, and achieve rapid and reliable AR. To overcome the inaccurate ionospheric delay estimated by the geometry-free three carrier ambiguity resolution (GF TCAR) technique, which leads to failure in the original ambiguity resolution, we propose an ionospheric-free (IF) TCAR method to resolve the ambiguity between the reference stations over long baselines. Taking full advantage of the known positions of the reference stations, the easily resolved extra-wide-lane (EWL) ambiguity, and the IF phase combinations, we can reliably fix the wide-lane (WL) ambiguity. A Kalman filter is applied to estimate precise IF ambiguities and the original ambiguity is resolved with the fixed WL ambiguity. A numerical analysis with triple-frequency BDS data from three long baselines of a CORS network is provided to compare the AR performance of GF TCAR with that of IF TCAR. The results show that both methods can reliably resolve the WL ambiguity with a remarkable correctly-fixed rate of higher than 99%, and the reliably-fixed rates of the IF TCAR slightly increase from 92.19, 94.67 and 94.61–98.26, 99.54 and 97.51% for the three baselines. Herein “correctly-fixed” and “reliably-fixed” mean the difference between the float ambiguity and the true one are less than ± 0.5 and ± 0.25 cycles, respectively. On the other hand, the AR performance of the original signals with the IF TCAR method is much better than that with the GF TCAR method attaining a 100% correctly-fixed rate, while the GF TCAR method can hardly fix the original ambiguity with the largest bias being as much as 4 cycles because of the amplified systematic bias.     

多用途地籍信息系统的设计与研究(一)——多用途地籍信息系统的基本概念

本文根据北美国家建立多用途地籍信息系统的经验,介绍了该系统的基本概念、基本元素和生命周期。可供正在建立或准备建立多用途地籍信息系统的专业人员参考。     

On the swelling potential of compacted high plasticity clays

We conducted a study of the spatial distributions of seismicity and earthquake hazard parameters for Turkey and the adjacent areas, applying the maximum likelihood method. The procedure allows for the use of either historical or instrumental data, or even a combination of the two. By using this method, we can estimate the earthquake hazard parameters, which include the maximum regional magnitude Mˆ_max, the activity rate of seismic events and the well-known bˆ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. These three parameters are determined simultaneously using an iterative scheme. The uncertainty in the determination of the magnitudes was also taken into consideration. The return periods (RP) of earthquakes with a magnitude M ≥ m are also evaluated. The whole examined area is divided into 24 seismic regions based on their seismotectonic regime. The homogeneity of the magnitudes is an essential factor in such studies. In order to achieve homogeneity of the magnitudes, formulas that convert any magnitude to an M_S-surface scale are developed. New completeness cutoffs and their corresponding time intervals are also assessed for each of the 24 seismic regions. Each of the obtained parameters is distributed into its respective seismic region, allowing for an analysis of the localized seismicity parameters and a representation of their regional variation on a map. The earthquake hazard level is also calculated as a function of the form Θ = (Mˆ_max,RP_6.0), and a relative hazard scale (defined as the index K) is defined for each seismic region. The investigated regions are then classified into five groups using these parameters. This classification is useful for theoretical and practical reasons and provides a picture of quantitative seismicity. An attempt is then made to relate these values to the local tectonics.     

超级喷发(超级侵入)后成矿作用

本文仿照超级喷发的概念定义了超级侵入,并将超级火山对应于大型岩基.文章聚焦于这样一个科学问题:为什么大规模成矿作用发生在紧接着超级喷发和超级侵入之后？为此,首先探讨了峨嵋山地幔柱系统的活动规律.尽管少数学者对玄武质岩浆大规模喷出之前的千米级地壳隆升提出了质疑,峨嵋山火山岩系第一旋回底部玄武岩直接覆盖在喀斯特之上的新观察支持千米级隆升的认识.这表明,峨嵋山地幔柱快速上涌之初期,岩石圈子系统在相当长一段时间没有作出伸展响应,尽管局部已经发生了地壳岩石的部分熔融.因此,岩浆通道形成之后,首先喷出了巨厚层玄武岩,并且后者裹挟了部分长英质岩浆.此后,岩浆喷发的规模振荡性减小,直至消失和地表沉降.斜长石巨斑玄武岩和苦橄岩中橄榄石斑晶与基质间的不平衡表明这些晶体属于循环晶,暗示岩浆曾经在深部岩浆房滞留了相当长的时间,这将导致岩石圈受热膨胀和再次隆升以及岩浆的冻结.因此,下一阶段岩浆活动的开始要求有一个冻结岩浆房的活化机制.依据野外地质学和岩相学观察,文章详细描述了流体活化机制,并强调了提出这种机制的必要性.虽然多数作者偏好升温活化机制,流体活化机制对长英质和镁铁质岩浆成矿系统都是必需的.进而,结合地幔名义无水矿物的H₂O丰度及其对岩浆产生过程的贡献,提出岩浆产量与减压速率正相关而与流体产量反相关的观点.尽管水流体可以有效降低地幔橄榄岩的固相线温度从而有可能提高岩浆产量,新生代玄武岩中橄榄岩包体依然含有未分解的角闪石和云母且名义无水矿物依然含有较多的H₂O,表明快速减压条件下含水暗色矿物的分解反应和名义无水矿物的脱水作用都是低效的.将这种认识与峨嵋山地幔柱系统的振荡性运动结合在一起,结合成矿作用的基本解是成矿金属从流体中析出的认识,可以得出超大型矿床必然形成于超级喷发和超级侵入之后.攀枝花式铁矿的观察表明,两类代表性矿床都具有铁矿浆侵位发生在成矿系统演化最后阶段的特点.因此得出结论:超大型矿床的形成取决于岩浆通道向流体通道的转换.如果岩浆通道在尚未完全封闭之前被含矿流体所利用,大规模流体快速上升将产生超大型矿床.含矿流体透过残留于通道中的熔体上升,不仅冲刷通道中的残留熔体并使其聚集在火山岩系之下或侵位于其下部形成含矿小岩体,而且持续注入于小岩浆体中的含矿流体可以导致岩浆强烈分异形成层状岩体.当通道中残留熔体被消耗殆尽,沿着通道上升的只有含矿流体.这些含矿流体充填在自生长裂隙中并强烈排气,最终可形成矿浆型富矿体.考虑到通道的规模与关闭速率的关系,推测超级喷发/侵入发生时的岩浆主通道更容易转换为含矿流体通道,因而是圈定找矿靶区的首选目标.该模型似乎与观察结果相吻合,并可与岩浆成矿系统的复杂性、小岩体成大矿理论、透岩浆流体成矿理论和通道成矿假说有机地结合在一起,较合理解释了超级喷发/侵入后成矿作用的地球动力学背景和成矿过程.由于长英质和镁铁质岩浆系统中均可见岩基,我们建议将这类成矿作用统称为岩基后成矿作用.     

湖南禾库地区水系沉积物地球化学特征及找矿预测

依据1∶5万水系沉积物测量资料,分析研究了湖南禾库地区水系沉积物地球化学特征。对元素分布、单元素异常、元素相关性、异常元素组合等特征的研究表明水系沉积物地球化学测量方法在高山峻岭、地形复杂的禾库地区有良好的找矿效果,并优选了嗅脑和杉木冲2处铅锌找矿远景区。     

松嫩平原耕层土壤固碳潜力估算

提高土壤碳收集能力对减缓全球温室效应具有重要意义。利用松嫩平原南部第二次土壤普查及多目标区域地球化学调查获取的两期表层土壤有机碳数据,根据近20年来各土壤类型不同土地利用方式土壤有机碳量变化趋势,估算了松嫩平原南部各土壤类型、各用地方式下土壤碳源、汇潜力。由估算得出,如果目前的土地利用方式、气候条件、耕作方式、种植技术不变,松嫩平原耕地土壤0~20 cm土层的固碳潜力为-1.229Tg碳,各土壤类型的林地土壤固碳潜力绝大多数为正值,说明林业用地为碳汇区,固碳潜力合计为3.169Tg碳,而天然牧草地绝大多数的固碳潜力为负值,固碳潜力合计为-2.235Tg碳,为碳源区,本次研究估算得出,松嫩平原总体的固碳潜力为-0.917Tg碳。     

咸淡水驱替过程中含水介质渗透性变化的试验研究

在野外水文地质调查的基础上,采集青岛市大沽河下游咸水入侵区砂样,首先对含水介质的粒度和矿物组成进行了分析,然后通过室内砂槽模拟试验,对咸淡水驱替过程中含水介质的渗透性变化规律进行了研究。结果表明,当咸淡水相互驱替时,含水介质的渗透性会发生显著变化,这种变化主要是由于驱替液盐浓度的变化,使得伊利石、高岭石和绿泥石等非膨胀性粘土矿物经释放、迁移、絮凝和沉积,从而重新分布所引起的。含水介质渗透性的变化具有明显的非均质性,即位于距入水处不同水平距离以及不同高度处的含水介质,其渗透性变化规律有所不同。     

土库曼斯坦阿姆河盆地卡洛夫-牛津阶储层特征及控制因素分析

土库曼斯坦东北部的阿姆河盆地,是中亚地区最重要的含油气盆地之一。根据钻井岩芯和分析化验资料,确定阿姆河盆地卡洛夫-牛津阶为碳酸盐台地相沉积,具有特征的前缘缓斜坡沉积模式,可划分为蒸发台地、局限台地、开阔台地、台地边缘、前缘缓斜坡和盆地6个相带。其中台内、台地边缘和前缘缓斜坡为储层发育相带,尤以发育于台地边缘、开阔台地和前缘缓斜坡相带中的礁、滩微相最有利于储层发育。沉积微相和岩性对储层类型及物性有直接控制,特点为高能环境条件下沉积的块状礁灰岩和中-厚层状滩相颗粒灰岩以发育原生孔隙保存良好的孔隙型和裂缝-孔隙型储层为主,而较低能环境条件下沉积的(含)颗粒微晶灰岩、隐藻灰岩和泥-微晶灰岩以发育基质岩物性很差的裂缝型储层为主。通过综合分析,认为储层发育受沉积微相、岩性和成岩作用复合控制,以各相带内的礁、滩微相灰岩为高效勘探开发目标的"甜心"位置。     

宁夏清水营井田延安组层段划分及沉积环境演化

依据岩性组合特征对清水营井田延安组含煤地层进行了层段划分,并对各层段的沉积环境进行了分析,认为延安组沉积环境是以河流作用为主的湖泊三角洲相,其形成经历了冲积平原、浅湖三角洲又复向冲积平原过渡的充填演化过程．每一充填阶段均具有明显的周期性变化,这种充填形式决定了本区中侏罗世的聚煤特点．聚煤作用主要发生于废弃的三角洲平原之上,并形成区内具有工业价值的主要煤层。