华南阿伦尼格世几丁虫生物地层与古生物地理

本文系统介绍了湖北宜昌黄花场及浙江常山黄泥塘剖面Ａｒｅｎｉｇ统几丁虫分布发育规律，指出华南地区Ａｒｅｎｉｎｇ统的几丁虫自下向上可划分为Ｃｏｎｏｃｈｉｔｉｎａｓｙｍｍｅｔｒｉｃａ，Ｅｒｅｍｏｃｈｉｔｉｎａｂａｃｕｌａｔａ，Ｅｒｅｍｏｃｈｉｔｉｎａｂｒｅｖｉｓ－Ｃｏｎｏｃｈｉｔｉｎａｌａｎｇｅｉ，Ｃｏｎｏｃｈｉｔｉｎａｐｉｒｕｍ，Ｒｈａｂｄｏｃｈｉｔｉｎａｔｕｒｇｉｄａ等生物带。讨论了华南地区这一时期     

松辽盆地白垩系的密集段及海水进侵的新证

在总结松辽盆地白恶系层地层特征的基础上，阐述了密集段的地质学和地球物理学标志，经分析，大多数重要反射与密集段相关而并非是层序边界，根据扫描电镜分析结果，在密集段中首次发现了钙质超微化石，为区内白垩纪海水进侵的提供了新的证据，由稳定同位素分析，密集段形成了缺氧，相对可容纳空间最大及水体最深时期。     

茅台酒酿酒高梁的地质环境研究

茅台酒对酿酒高梁有严格要求，适于茅台酒传统酿造工艺的高梁只产于仁怀县的某些地区，主要是受地质环境的控制。仁怀高梁对某些常量和微量元素有着鲜明的选择性，对磷和钼表现出强烈的吸收作用。岩－土剖面元素的迁聚，对磷和铝的供应是确定仁怀高梁品质和产量的关键。侏罗系砂泥岩、二叠系煤系地层的岩－土剖面，元素淋溶微弱，总量丰富，有效态含量高，组合良好，能正常进行岩－土－高梁系统的物质转化与元素迁移，能充分供应高梁生长所需的磷和钼等元素，是茅台酒酿酒高梁的最宜种植区。     

电吸附找矿方法寻找隐伏金矿床的研究

电吸附找矿方法是指对采集的样品在室内特别装置中通电，并用吸附体吸附试样中电运移元素，通过这些元素所形成的异常来发现矿体的一种方法，该方法是依据野外地电提取方法的理论发展起来的，具有设备简单，成本低，工效效率高，工作条件及质量容易控制等优点。     

近场源二极激电法在贫硫银金矿床的应用效果

在管地贫硫银金矿床进行了近场源二极激电法的应用研究，获得了三高一低的次级低缓激电异常，即高ηｓ、Ｒ_２、Ｊｓ，低ρｓ，表明用次级参数表示的激电弱异常要明显，为增加矿量，提高地质找矿效果起了积极作用。     

Geostatistical regionalization of glacial aquitard thickness in northwestern Germany, based on fuzzy kriging

In many instances hydrogeological parameters obtained by conventional methods for selected localities within an aquifer or an aquitard are not sufficient for adequate regionalization at the scale of the entire layer. Here, we demonstrate an application of the fuzzy kriging method in regionalization of hydrogeological data, in which the set of conventional, crisp values is supplemented by imprecise information subjectively estimated by an expert. It is believed that such an approach eventually may reflect the real-world conditions more closely than a traditional crisp-value approach, because the former does not impose exactness artificially on phenomena which are diffuse by their nature. Spatial interpolation was done for the thickness of one of the major aquitards (till and glaciolacustrine clay) in northwestern Germany. The dataset consists of 329 crisp values from boreholes supplemented by 172 imprecise values defined as fuzzy numbers. It is demonstrated that the reliability of regionalization was higher, compared to regionalization performed with the crisp dataset only. Fuzzy kriging was performed with FUZZEKS (Fuzzy Evaluation and Kriging System) developed at the Ecosystem Research Center at the University of Kiel.     

A note on thermomechanical anisotropy of clays

Deep clays exhibit a pronounced strain anisotropy both during mechanical loading as well as during heating and cooling at constant stress in drained isotropic conditions. During mechanical loading vertical strain is larger than the horizontal one. During heating the vertical strain is larger than the horizontal one within the elastic range; the opposite is observed in the elasto-plastic range. The above described response can be interpreted adopting a consistent rotational, kinematic hardening thermo-elasto-plastic constitutive law.     

Overview of in-situ thermomechanical experiments in clay: Concept, results and interpretation

The HADES project (High Activity Disposal Experimental Site) aims at demonstrating the technical feasibility and the long-term safety of geological disposal of reprocessed HLW (High-Level Wastes) radioactive wastes. This disposal could be realised in the Tertiary Boom clay formation below the Mol/Dessel nuclear site. Previous studies in the 80's on the geomechanical behaviour of Boom clay, at host rock temperature (15°C), have demonstrated the mining capabilities of this clay. European partners have collaborated to increase the number of in-situ tests to be developed and operated from the Underground Research Facility (URF). Integrated large-scale experiments have been developed during the last four years, within the framework of the Commission of the European Communities (CEC) research contracts, in order to gain more insight into the thermal influence of heat-emiting wastes on the clay behaviour in the near field.

This paper summarizes the knowledge gained from the in-situ hydro-thermo-mechanical experiments realised from the URF. The objectives and main issues of the tests are described. Information regarding selection of parameters and representativeness of their measurements is discussed. Despite their different aims and designs, three hydro-thermo-mechanical experiments are compared in order to emphasize similarities in the general behaviour of the clay massif submitted to a thermal load. It is observed that its behaviour is qualitatively similar to the reaction upon a constant total stress increase. With the information now available, it is not obvious to draw conclusions with respect to the irreversibility of some phenomena.

Simple in-house analytical codes are able to simulate with a good accuracy the hydro-thermo-mechanical behaviour of clay. Nevertheless, these codes are not sufficient to describe the complexity of the phenomena that are involved in hydro-thermo-mechanical processes as pointed out by field data. In order to validate more complex models, the possibilities to improve the representativeness of the measurements are investigated.     

内蒙古科尔康油田沙海组储集层的岩石学特征

根据碎屑岩铸体薄片和扫描电镜观察分析资料，研究了科尔康油田沙海组储集层的岩石学特征。科尔康油田沙海组储集层的岩石类型主要为岩屑砂岩和岩屑砂砾岩。碎屑岩的岩性特征对沙海组储集层的成岩作用具有显著的影响作用。