Carbon dioxide partial pressures in North Pacific surface waters — Time variations

Observations were made of time variations of the carbon dioxide partial pressures (Pco₂) of the atmosphere and surface sea waters in the Pacific subarctic region. Data were obtained on a cruise of the USC & GSSSURVEYOR in October, 1968 and on the TRANSPAC expedition of the CNAVENDEAVOUR in March–April, 1969. A rise in surface water Pco₂ of 18×10^–6 atm occurred in a period of 30–45 days in March–April due principally to spring warming of surface waters. An average increase of 60×10^–6 atm occurred between October, 1968 and March, 1969 as a result mainly of cessation of summer phytoplankton production and the onset of winter-storm-driven vertical mixing. Because the air-sea Pco₂ gradient not only changed appreciably in magnitude but also changed sign, there are important implications for calculations of air-sea exchange of carbon dioxide on the ocean wide scale.Data contained in this paper comprise part of a dissertation to be submitted by Louis I. Gordon in partial fulfillment of the requirements for the Ph. D. at Oregon State University.     

Spatial Response to Major Volcanic Events in or about AD 536, 934 and 1258: Frost Rings and Other Dendrochronological Evidence from Mongolia and Northern Siberia: Comment on R. B. Stothers, ‘Volcanic Dry Fogs, Climate Cooling, and Plague Pandemics in Europe and the Middle East’ (Climatic Change, 42, 1999)

Hypothesized large-scale climatic extremes require verification from distantregions in order toconfirm the magnitude and timing of such events. Three of the most massivehypothesized volcanic events of the past two millennia, occurring in or aboutAD 536, 934 and1258, had profound climatic and demographic repercussions over much of Europe,the MiddleEast, and other areas, according to historical accounts recently described inStothers (1998, 1999,2000) as well as other research. Here we report on frost ring and otherdendrochronologicalevidence derived from a 1738-year tree-ring chronology from Mongolia andmillennial-scaletree-ring data from northern Siberia which demonstrate that these three eventsmay have alsoimpacted conditions in these distant regions.     

Investigating the effect of soil models on deformations caused by braced excavations through an inverse-analysis technique

In this study, a series of inverse-analysis numerical experiments was performed to investigate the effect of soil models on the deformations caused by excavation by using the finite element method. The nonlinear optimization technique that was incorporated into the finite element code was used for the inverse-analysis numerical experiments. Three soil models (the hyperbolic model, pseudo-plasticity model, and modified pseudo-plasticity model) were employed in the intended numerical experiments on a well-documented excavation case history. The results indicate that wall deflection due to excavation can be accurately back-figured by each of the three soil models, while the ground surface settlement can be reasonably optimized only by the pseudo-plasticity model and the modified pseudo-plasticity model. Importantly, the modified pseudo-plasticity model can yield more reasonable simulations when the wall deflection and the ground surface settlement are simultaneously back-figured. The results show that selection of an adequate soil model that is capable of adequately describing the stress–strain-strength characteristics of the soils is essentially crucial when predicting the excavation-induced ground response.     

The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

Effects of Volcanic Ash on Computers and Electronic Equipment

Computers and electronic equipment are an important component of the infrastructure of our modern environment. It is therefore essential that we know the effects of volcanic ash on such equipment. This paper presents the results of a pilot study to test computers and cooling fans in an ash-charged environment to assess their vulnerability. In the experiment, ash was poured on to computers and cooling fans in a sealed 0.216 m³ perspex box, with the effects on both the ash and the equipment monitored. Three different types of ash (1996 Ruapehu andesitic ash, Sakurajima andesitic ash and Kaharoa rhyolitic ash) were used in the experiments.In the first experiment each type of ash was photographed by Scanning Electron Microscope (SEM), then passed through the bearing unit of a cooling fan and photographed again afterwards. The bearings within the cooling fan continued to work even after 720 h of testing and there was no significant abrasion of the fan-shaft bearing. The ash was however fragmented, suggesting that the brittle ash shattered to fine dust, which caused significantly less abrasion to the bearings or shaft than expected. Three computers were then tested in the sealed box. Ash was introduced at increasing rates to simulate catastrophic entry of ash into a work environment, and computers were tested throughout using the BURNIN^® testing programme. Failure times ranged from 100 to 150 h; most failures occurring when humidity was increased by spraying water mist into the airflow. If dried out the computers continued to operate again if failure was not catastrophic. Card slot edge connectors proved to be one of the weakest links, as a bridge of ash formed across the gap. They were also subject to abrasion with some of the gold plating being removed. This did not however cause operating difficulties.The conclusions are that computers are more resilient than originally thought, unless the ash is moist. Simple low-tech procedures should be adequate to protect computers from small amounts of dry and moist ash contamination.     

Backward automatic calibration for three-dimensional landslide models

Back-analysis is broadly used for approaching geotechnical problems when monitoring data are available and information about the soils properties is of poor quality.For landslide stability assessment back-analysis calibration is usually carried out by time consuming trial-and-error procedure.This paper presents a new automatic Decision Support System that supports the selection of the soil parameters for three-dimensional models of landslides based on monitoring data.The method considering a pool of possible solutions,generated through permutation of soil parameters,selects the best ten configurations that are more congruent with the measured displacements.This reduces the operator biases while on the other hand allows the operator to control each step of the computation.The final selection of the preferred solution among the ten best-fitting solutions is carried out by an operator.The operator control is necessary as he may include in the final decision process all the qualitative elements that cannot be included in a qualitative analysis but nevertheless characterize a landslide dynamic as a whole epistemological subject,for example on the base of geomorphological evidence.A landslide located in Northeast Italy has been selected as example for showing the system potentiality.The proposed method is straightforward,scalable and robust and could be useful for researchers and practitioners.     

Boreal temperature variability inferred from maximum latewood density and tree-ring width data, Wrangell Mountain region, Alaska

Variations in both width and density of annual rings from a network of tree chronologies were used to develop high-resolution proxies to extend the climate record in the Wrangell Mountain region of Alaska. We developed a warm-season (July–September) temperature reconstruction that spans A.D. 1593–1992 based on the first eigenvector from principal component analysis of six maximum latewood density (MXD) chronologies. The climate/tree-growth model accounts for 51% of the temperature variance from 1958 to 1992 and shows cold in the late 1600s–early 1700s followed by a warmer period, cooling in the late 1700s–early 1800s, and warming in the 20th century. The 20th century is the warmest of the past four centuries. Several severely cold warm-seasons coincide with major volcanic eruptions. The first eigenvector from a ring-width (RW) network, based on nine chronologies from the Wrangell Mountain region (A.D. 1550–1970), is correlated positively with both reconstructed and recorded Northern Hemisphere temperatures. RW shows a temporal history similar to that of MXD by increased growth (warmer) and decreased growth (cooler) intervals and trends. After around 1970 the RW series show a decrease in growth, while station data show continued warming, which may be related to increasing moisture stress or other factors. Both the temperature history based on MXD and the growth trends from the RW series are consistent with well-dated glacier fluctuations in the Wrangell Mountains and some of the temperature variations also correspond to variations in solar activity.     

Debris flow overflowing flexible barrier: physical process and drag load characteristics

Landslides - The multiple-barrier mitigation strategy in the debris-flow source area is an effective approach to inhibit debris-flow entrainment and scale amplification along the flow path....