Wet tropospheric effects on precise relative GPS height determination

Summary Considerable interest has been generated recently in the use of the Global Positioning System (GPS) for precise height determination. A major error source in these measurements is the propagation delay due to atmospheric water vapour. In order to achieve the high precisions required for such applications as absolute sea-level monitoring improvement of wet delay modelling is necessary. Results from a GPS campaign show a significant correlation (0.91) between the variability of the wet delay measured using a water vapour radiometer (WVR) at the Onsala site and the absolute value of the residual error in the height determination of a 134 km baseline from Onsala to Jönköping. This correlation indicates that the atmosphericvariability as inferred from the WVR data includes information on the quality of the GPS height estimate. During periods of high atmospheric activity, e.g., during the passage of a weather front, the use of a six-parameter gradient model reduces the spread for the vertical coordinate from 40 mm to 20 mm (with standard deviations of 17 mm and 9 mm respectively) over the 134 km baseline (less than 1 × 10^–7) using 8 hour data spans on 11 different days over a six month period.     

隧道GPS网对横向贯通误差的影响

本文在阐述隧道工程独立坐标系和隧道ＧＰＳ网数据处理方法的基础上推导出ＧＰＳ网对横向贯通误差影响的通用计算公式，分析了隧道ＧＰＳ网基准数据位置对横向贯通误差的影响。     

地理信息系统基础软件吉奥之星NT版的总体设计思想与关键技术

介绍了新一代面向对象的GIS基础软件系统吉奥之星NT版的总体设计思想、系统结构、功能特点和有关关键技术。     

Use of potential coefficient models for geoid undulation determinations using a spherical harmonic representation of the height anomaly/geoid undulation difference

 This paper suggests that potential coefficient models of the Earth's gravitational potential be used to calculate height anomalies which are then reduced to geoid undulations where such quantities are needed for orthometric height determination and vertical datum definition through a potential coefficient realization of the geoid. The process of the conversion of the height anomaly into a geoid undulation is represented by a height anomaly gradient term and the usual N–ζ term that is dependent on elevation and the Bouguer anomaly. Using a degree 360 expansion of 30′ elevations and the OSU91A potential coefficient model, a degree 360 representation of the correction terms was computed. The magnitude of N–ζ reached –3.4 m in the Himalaya Mountains with smaller, but still significant, magnitudes in other mountainous regions. Received: 6 May 1996; Accepted: 30 October 1996     

The hierarchical tessellation model and its use in spatial analysis

The hierarchid tessellation model belongs to a class of spatial data models based on the recursive decomposition of space. The quadtree is one such tessellation and is characterized by square cells and a 1:4 decomposition ratio. To relax these constraints in the tessellation, a generalized hierarchical tessellation data model, called Adaptive Recursive Tessellations (ART), has been proposed. ART increases flexibility in the tessellation by the use of rectangular cells and variable decomposition ratios. In ART, users can specify cell sizes which are intuitively meaningful to their applications, or which can reflect the scales of data. ART is implemented in a data structure called Adaptive Recursive Run-Encoding (ARRE), which is a variant of two-dimensional run-encoding whose running path can vary with the different tessellation structures incorporated in an ART model. Given the recognition of the benefits of implementing statistical spatial analysis in GIS, the use of hierarchical tessellation models such as ART in spatial analysis is discussed. Three examples are introduced to show how ART can: (1) be applied to solve the quadrat size problem in quadrat analysis of point patterns; (2) act as the data model in the variable resolution block kriging technique for geostatistical data to reduce variation in kriging error; and (3) facilitate the evaluation of spatial autocorrelation for area data at multiple map resolutions via the construction of a connectivity matrix for calculating spatial autocorrelation indices based on ARRE.     

Assessing the Resolving Power of Photographic Systems Used forTerrestrial Remote Sensing

It is often necessary to measure the resolving power of an imaging system comprising "off the shelf" components by a method that can also describe resolution in the object space. Furthermore, the results should allow useful comparisons to be made with alternative systems, where these have undergone a similar evaluation procedure. An example is given of measuring the resolving power of two imaging systems employing catadioptric objectives by a method that does not necessitate extensive laboratory tests, but utilizes the photographic product provided through field trials, or in the course of operational use. While the method reported does not claim to be a rigorous evaluation of the resolving power, it has been found to provide a convenient and practical guide to the image quality associated with a complete camera system, and its relation to the object space.     

Position and velocity reliability testing in degraded GPS signal environments

Reliability testing, namely receiver autonomous integrity monitoring (RAIM), consists of statistical testing of least-squares residuals of observations, e.g., on an epoch-by-epoch basis aiming towards reliable navigation fault detection and exclusion (FDE). In this paper, classic RAIM and FDE methods are extended with testing of range-rate residuals to find inconsistent velocity solutions in order to contribute to the reliability of the system with special focus on degraded signal environments. Reliability enhancement efforts discussed include a Backward-FDE scheme based on statistical outlier detection and an iteratively reweighted robust estimation technique, a modified Danish method. In addition, measurement weighting assigned to code and Doppler observations is assessed in the paper in order to allow fitting a priori variance models to the estimation processes. The schemes discussed are also suitable in terms of computational convenience for a combined GPS/Galileo system. The objective of this paper is to assess position and velocity reliability testing and enhancement in urban and indoor conditions and to analyze the navigation accuracy conditions with high sensitivity GPS (HSGPS) tests. The results show the necessity of weighted estimation and FDE for reliability enhancement in degraded signal-environment navigation.     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.