GPS tomography in the polar cap: comparison with ionosondes and in situ spacecraft data

Tomographic 4D reconstructions of ionospheric anomalies appearing in the high-latitude polar cap region are compared with plasma density measurements by digital ionosonde located near the north magnetic pole at Eureka station and with in situ plasma measurements on-board DMSP spacecraft. The moderate magnetic storm of 14–17 October 2002 is taken as an example of a geomagnetic disturbance which generates large-scale ionospheric plasma anomalies at mid-latitudes and in the polar cap region. Comparison of the GPS tomographic reconstructions over Eureka station with the ionosonde measurements of the F layer peak densities indicates that the GPS tomography correctly predicts the time of arrival and passage of the ionospheric tongue of ionization over the magnetic pole area, although the tomographic technique appears to under-estimate the value of F peak plasma density. Comparison with the in situ plasma measurements by the DMSP SSIES instruments shows that the GPS tomography correctly reproduces the large-scale spatial structure of ionospheric anomalies over a wide range of latitudes from mid-latitudes to the high-latitude polar cap region, though the tomographic reconstructions tend to over-estimate the density of the topside ionosphere at 840 km DMSP orbit. This study is essential for understanding the quality and limitations of the tomographic reconstruction techniques, particularly in high-latitude regions where GPS TEC measurements and other ionospheric data sources are limited.     

Uncertainty in GPS Networks due to Remaining Systematic Errors: The Interval Approach

A realistic assessment of the total uncertainty budget of Global Positioning System (GPS) observations and its adequate mathematical treatment is a basic requirement for all analysis and interpretation of GPS-derived point positions, in particular GPS heights, and their respective changes. This implies not only the random variability but also the remaining systematic errors. At present in geodesy, the main focus is on stochastic approaches in which errors are modeled by means of random variables. Here, an alternative approach based on interval mathematics is presented. It allows us to model and to quantify the impact of remaining systematic errors in GPS carrier-phase observations on the final results using deterministic error bands. In this paper, emphasis is given to the derivation of the observation intervals based on influence parameters and to the study of the complex linear transfer of this type of uncertainty to estimated point positions yielding zonotopes. From the presented simulation studies of GPS baselines, it turns out that the uncertainty due to remaining systematic effects dominates the total uncertainty budget for baselines longer than 200 km.     

A four-component decomposition of POLSAR images based on the coherency matrix

A four-component decomposition scheme of the coherency matrix is presented here for the analysis of polarimetric synthetic aperture radar (SAR) images. The coherency matrix is used to deal with nonreflection symmetric scattering case, which is an extension of covariance matrix approach. The same decomposition results have been obtained. The advantage of this approach is explicit expressions of four scattering powers in terms of scattering matrix elements, which serve the interpretation of polarimetric SAR data quantitatively.     

Edge effects on tree height retrieval using X-band interferometry

This letter investigates the edge effects on the tree height retrieval over coniferous plantations using X-band interferometry. A coherent version of the water cloud model is used to evaluate the influence of observation conditions such as incidence angle, tree height, and slope, each of which affects the extent of areas affected by edge effects. Results from the model simulation are discussed in the context of actual X-band data over pine plantations. A generic expression to indicate the extent of edge effects is described.     

Supervised SAR Image MPM Segmentation Based on Region-Based Hierarchical Model

This letter presents a novel method of supervised multiresolution segmentation for synthetic aperture radar images. The method uses a region-based half-tree hierarchical Markov random field model for multiresolution segmentation. To form the region-based multilayer model, the watershed algorithm is employed at each resolution level independently. The nodes of a quadtree in the proposed model are defined as regions instead of pixels. The relationship over scale is studied, and the region-based upward and downward maximization of posterior marginal estimations are deduced. The experimental results for the segmentation of homogeneous areas prove the region-based model much better in terms of robustness to speckle and preservation of edges compared to the pixel-based hierarchical model and the Gibbs sampler with the single-resolution model     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

A community-based urban forest inventory using online mapping services and consumer-grade digital images

Community involvement in gathering and submitting spatially referenced data via web mapping applications has recently been gaining momentum. Urban forest inventory data analyzed by programs such as the i-Tree ECO inventory method is a good candidate for such an approach. In this research, we tested the feasibility of using spatially referenced data gathered and submitted by non-professional individuals through a web application to augment urban forest inventory data. We examined the use of close range photogrammetry solutions of images taken by consumer-grade cameras to extract quantitative metric information such as crown diameter, tree heights and trunk diameters. Several tests were performed to evaluate the accuracy of the photogrammetric solutions and to examine their use in addition to existing aerial image data to supplement or partially substitute for standard i-Tree ECO field measurements.     

Kinematic precise point positioning at remote marine platforms

Precise kinematic differential positioning using the global positioning system (GPS) at a marine platform usually requires a relatively short distance (e.g. <500 km) to a land-based reference station. As an alternative, precise point positioning (PPP) is normally considered free from this limiting requirement. However, due to the prerequisite of network-based satellite products, PPP at a remote marine platform may still be affected by its distance to the reference network. Hence, this paper investigates this scenario by configuring rings of reference stations with different radii centered on a to-be-positioned marine platform. Particularly, we applied ambiguity resolution at a single station to PPP by estimating uncalibrated phase delays (UPDs). We used three rings of reference stations centered on a vessel, with radii of roughly 900, 2,000 and 3,600 km, to determine satellite clocks and UPDs independently. For comparison, we also performed differential positioning based on a single reference station with baseline lengths of about 400, 1,700 and 2,800 km. We demonstrate that, despite the increasing ring-network radius to a few 1,000 km, the overall change in accuracy of the satellite clocks that are used at the vessel is smaller than 0.02 ns, and the RMS values of differences between the three sets of narrow-lane UPD estimates are around 0.05 cycles only. Moreover, the kinematic positioning accuracy of PPP is affected by the increasing ring-network radius, but can still achieve several centimeters after ambiguity resolution when the vessel is over a few 1,000 km away from the ring network, showing better performance than that of differential positioning. Therefore, we propose that ambiguity-fixed PPP can be used at remote marine platforms that support precise oceanographic and geophysical applications in open oceans.     

Approximating covariance matrices estimated in multivariate models by estimated auto- and cross-covariances

Quantities like tropospheric zenith delays or station coordinates are repeatedly measured at permanent VLBI or GPS stations so that time series for the quantities at each station are obtained. The covariances of these quantities can be estimated in a multivariate linear model. The covariances are needed for computing uncertainties of results derived from these quantities. The covariance matrix for many permanent stations becomes large, the need for simplifying it may therefore arise under the condition that the uncertainties of derived results still agree. This is accomplished by assuming that the different time series of a quantity like the station height for each permanent station can be combined to obtain one time series. The covariance matrix then follows from the estimates of the auto- and cross-covariance functions of the combined time series. A further approximation is found, if compactly supported covariance functions are fitted to an estimated autocovariance function in order to obtain a covariance matrix which is representative of different kinds of measurements. The simplification of a covariance matrix estimated in a multivariate model is investigated here for the coordinates of points of a grid measured repeatedly by a laserscanner. The approximations are checked by determining the uncertainty of the sum of distances to the points of the grid. To obtain a realistic value for this uncertainty, the covariances of the measured coordinates have to be considered. Three different setups of measurements are analyzed and a covariance matrix is found which is representative for all three setups. Covariance matrices for the measurements of laserscanners can therefore be determined in advance without estimating them for each application.